Kogan KABNKNTCNTA Manuale utente
Note Counter
KABNKNTCNTA
Quick Start Guide
Basic Usage
Auto type switch to manual type:
The machine automatically defaults to an auto-type option upon start-up. To
switch to manual type, press and hold the 'RESTART' key for 3 seconds until the
machine shows 'No'. ress the 'RESTART' key again to save it.
Ultra iolet Detection
In order to turn on the ultraviolet detection of the machine, press the 'UV' key
until the UV light turns on.
To turn ultraviolet detection off, press the UV key once again.
Magnetic Detection
In order to turn on the magnetic detection of the machine, press the 'MG' key
until the MG light turns on. To change the position of the magnetic sensors,
press the 'MG' key again to turn the MG2 light on.
To turn magnetic detection off altogether, press the MG key once again.
Addition
In order to turn on bank note addition, press the 'ADD' key until the ADD light
turns on.
To turn adding off, press the 'ADD' key once again.
Batching
The bank note counter can batch money together into pre-set values.
ress the 'BATCH' button on the machine to show '100/50/20/10'.
Settings
Fake Note Recognition
Fake note recognition alerts when a fake note has been fed.
To turn fake note recognition on, hold the '-' key for at least 3 seconds until the
machine displays 'U-01'. To turn it off again, briefly press the '-' key again until
the machine displays U-00.
ress the 'RESTART' key to save your changes.
Double Note Recognition
Double-note recognition alerts when two bills have been fed simultaneously.
To increase the sensitivity in detecting double-notes, hold the 'BATCH' key for
at least 3 seconds until the machine displays d-03(0-10). The default setting in
d-03, however this can be increased by pressing the 'BATCH or +' key again to
display a higher value.
ress the 'RESTART' key to save your changes.
Chained Note Recognition
Chained-note recognition alerts when a leading bill has pulled in a trailing bull
prematurely.
To increase the sensitivity in detecting chained-notes, hold the 'ADD' key for at
least 3 seconds until the machine displays c-03(0-5). The default setting in c-03,
however this can be increased by pressing the '+' ley again to display a higher
value.
ress the 'RESTART' key to save your changes.
Ultra iolet Sensiti ity
The ultraviolet light sensitivity helps detect fake paper and plastic notes with
fluorescence.
In order to increase the sensitivity in detecting fake notes, hold the 'UV' key for
at least 3 seconds until the machine displays a-08(0-10). The default setting is a-
08, however the sensitivity can be deceased by pressing the '+' key again to
display a higher value.
ress the 'RESTART' key to save your changes.
Magnetic Sensiti ity
The magnetic sensitivity helps detect fake paper and plastic notes with
magnetic components.
In order to increase the sensitivity in detecting fake notes, hold the 'MG' key for
at least 3 seconds until the machine displays b-08(0-20). The default setting is
b-08, however the sensitivity can be increased by pressing the '+' key again to
display a higher value.
ress the 'RESTART' key to save your changes.
Factory Reset
In order to perform a factory reset, hold the '+' key for at least 3 seconds until
the machine shows '---'.
ress the 'RESTART' key to save your changes.
Sensiti ity
ress the 'MG' and 'RESTART' buttons at the same time until the machine shows
H-01. After that, press the 'ADD' or ' BATCH' buttons to switch from each
setting, or press 'MG' or 'RESTART' to change other parameters.
View the Code reference for further details.
Code Reference
CODE Terms Original Instruction
H-01 Voice 1 0：OFF，1：ON
H-02 Fake note counting 1 0：OFF，1：ON
H-03 iece compare 1 0：ON，1：OFF
H-04 Frag note test 1 0：ON ，1：OFF
H-05 Slope compensation 1 0：OFF，1：GENERAL，
2: High-supply
H-06 LCD standby 3 0-10，0:ON
H-07 Brake effect 35~60 The greater the value, the longer
the brake time
H-09 Start sensitivity 100 The smaller the value, the higher
sensitivity
H-10 Clear sensitivity 100 The smaller the value, the higher
sensitivity
H-11 Counting tube Opto sensitivity 200 Test size, The smaller, the bigger
size,
H-14 DOUBLE NOTE 0(0-10)
0:OFF ，The greater no., the
higher the sensitivity. Error
Code :D
H-15 Chain note 3
0:OFF ，The greater no., the
higher the sensitivity. Error
Code :C
HE10 UV 160
0:OFF ，The smaller no., the
higher the sensitivity. Error
Code :A
HE63 MG 5 The greater the no., the higher
the sensitivity.
If you ha e any further questions or concerns regarding the use of this
product, please contact the Kogan.com customer support team.
Altri manuali per KABNKNTCNTA
1
Altri manuali Kogan Contatore di banconote
Manuali Contatore di banconote popolari di altre marche
Safescan
Safescan 2660-S Manuale utente
PRO Intellect Technology
PRO Intellect Technology PRO 95U Manuale utente
Dors
Dors 600 Manuale utente
radiotec
radiotec rapidcount S 575 Manuale utente
CUMMINS ALLISON
CUMMINS ALLISON JetScan Manuale utente
PRO Intellect Technology
PRO Intellect Technology 40 NEO Manuale utente
