Kogan KAMN24FXCLB Manuale utente
24" CURVED 16:9 FHD
GAMING MONITOR
1920 x 1080 144HZ
KAMN24FXCLB
• Read all instructions before using and retain for reference.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them.
• Ensure the monitor is placed on a flat surface. If the monitor falls down, it may cause
human injury or device damage.
• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away
heat sources.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as
well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged
and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor, as it contains a high-voltage current even
when not plugged in.
• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel
it off, or the product may be damaged and the warranty will be invalid.
The terms HDMI and HDMI High-Definition Multimedia
Interface and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
SAFETY & WARNINGS
Monitor
Stand connector
Stand base
Stand screws (x3)
VESA screws (x4)
Cable guide
Silicone pad
DP cable
Power adapter
User guide
COMPONENTS
Button
Function
M
Menu button: Confirm/call up the main menu.
Down button: Move down in the menu/quickly enter the LED Effect.
Up button: Move up in the menu/quickly enter the ECO.
E
Exit button: Exit/return to the previous menu.
Powerbutton:Turnon/offthemonitor.
Indicator
Indicator
Status
Blue
Power is on and the monitor operating normally.
Red
No horizontal or vertical signal detected, no video input signal or
the monitor is in standby.
Ensure your computer is turned on and operates normally and
check that all video cables are fully plugged in and/or connected to
themonitor.
OVERVIEW
Indicator
+
1. Open the carton, take out the stand and base, insert 2 screws into the base to lock
the stand then install the silicone pad. Attach the cable guide to the stand, as
shown below:
2. Remove the monitor out from the carton. Keep the monitor in the foam and place it
flat and face down, clip the stand assembly into the monitor and release the
button to complete the stand assembly.
3. Stand the monitor up on the assembled base.
ASSEMBLY
Stand screws
Silicone
pad
Cable
guide
button
VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount or mounting accessories are not included.
1. Open the box, take out the monitor with
protection foam attached and gently place it
on a desktop or table. Ensure all components
are removed from the foam covering. Press the
release button to remove the stand plate.
If the monitor is already attached to the stand,
remove the stand before proceeding with
VESA mount assembly.
2. Remove the two screws of the rear case.
3. Remove the four VESA screws from the accessory bag to and attach them to the
rear casing.
VESA MOUNT
Screws
VESA screws
4. During hanging of the product, do not pinch the screen with your hand to avoid
damaging the screen.
Instructions for attaching to the specific wall mount will be included with the
mount.
Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it
fully. Do not place or hang any object on the mount. Ensure the height of the mount is less
than 2meters.
Mount (not supplied)
Power Adapter
Connect the included power adapter to the monitor power port and then connect the other
end to a power outlet.
Audio Out
Connect an audio output device (speakers, headphone etc.) to the 3.5mm audio port on the
monitor.
CONNECTIVITY
Power adapter
Headphone/speakers
(not included)
HDMI
Connect an HDMI cable from the computer’s display output to the monitor’s display input.
DisplayPort
Use the supplied DP cable to connect the computer’s display output to the monitor’s
display input.
HDMI cable
(not included)
DP cable
Indice
Altri manuali Kogan Monitor
Kogan
Kogan KAMN34F1QULB Manuale utente
Kogan
Kogan KAMN15CDA Manuale utente
Kogan
Kogan KAMN27F7VA Manuale utente
Kogan
Kogan KAMN24F75LB Manuale utente
Kogan
Kogan KAMN27QFSB Manuale utente
Kogan
Kogan KAMN26FUSA Manuale utente
Kogan
Kogan KAMN29UHWLA Manuale utente
Kogan
Kogan KALED27MONC Manuale utente
Kogan
Kogan KALED463D1ZA Manuale utente
Kogan
Kogan KAMN34XQUCLA Manuale utente
Kogan
Kogan KAMN44UWCLA Manuale utente
Kogan
Kogan KAMN32F16LB Manuale utente
Kogan
Kogan KAMN28UHFSA Manuale utente
Kogan
Kogan KAMN30FXULA Manuale utente
Kogan
Kogan KALED30MONA Manuale utente
Kogan
Kogan KAMN27LSC Manuale utente
Kogan
Kogan KALED27MONSD Manuale utente
Kogan
Kogan KAMN32F7CSA Manuale utente
Kogan
Kogan KAMN32RT1SA Manuale utente
Kogan
Kogan KAMN32F7USA Manuale utente
