Kohler VOLT VK4X1E Manuale utente

Owners Manual

MODEL-VK4X1E

OPEROR'S MANUAL

4 In 1

We want to thank you for your purchase of our state of

the Multi-Functional 4 in 1 Machinery. This manual will

tell you how to use and maintain. Please read the

manual carefully before operating the machine.

Operating the machine in the best conditions will

increase the lifetime of the unit.

If you have any suggestions for the manual please

contact your local dealer. We as a company are

striving to make constant upgrades to our equipment to

provide our customer base with the best units possible.

The specifications for each unit may vary from machine

to machine.

Catalogue

1.Safety…………………………………………..1

2.Specifications…………………………………4

3.Component Identification…………………...5

4.Preparation……………………………….…..9

5.Starting……………………………………….12

6.Operation…………………………………....13

7.Engine Shut down…........………………….14

8.Maintenance…………………………………15

9.Common Faults and troubleshooting…....23

10.Schematic Diagram………………………26

1．Safety Instruction

Please read the manual before operation, failure to comply

with the manual could lead to danger of operator, others and

the machine.

1.1.Protect yourself and others. Welding can make you and

others in danger of many risk factors: Make sure to never weld

without a welding mask. This goes for not only the operator, but

all other bystanders as well. The damages to eyes include:

electric arc, dazzle reflections, dazzle flicker, sparking molten,

metal splashing. Looking at welding arc without eye protection

can inflict great pain and even temporary blindness. Therefore,

this products

owner/operator should ensure the welding machine

operated by a user with prior welding knowledge. Use these

professional protective equipment when operating.

-Face shield

-dedicated heat resistant gloves

-Protective clothing and shoes

1.2. Do not use machine in area where dust pollution,

flammables or explosives are present.

1.3 Power supply and welding current can cause shock

damage. Please do not touch inside or face plate of welding

machine at any time. Make sure operator and all other have

protection. Do not let your body touch the ground and the

electrode at that same time.

1.4 Welding fumes and gasses can cause serious harm to

operator and all other by standards. Please keep your head

away from a place you could possibly breathe in fumes and

make sure to use the machine in a well ventilated area.

1.5 To prevent any fire hazards do not have any residue of

gasoline or kerosene on your person, cylinder or piping you

may be welding.

1.6 Do not operate machinery if you have a pacemaker. This

includes being anywhere near the machine even if someone

else is operating. The magnetic field produced by the

welding machine could have adverse effects on a

pacemaker.

1.7 Welding splatter can cause fire and explosions. Do not

weld in dangerous situations such as around flammables,

explosives, a closed barrel or pipe.

1.8 There is extreme heat produced by the exhaust pipe,

engine, air compressor and muffler. Please do not touch

these parts or have flammables anywhere near the unit. The

high temperature produced by the exhaust is capable of

igniting any flammables or explosives.

1.9. It is important that this unit is installed, used and

maintained by professionals. Do not tamper or remove any

safety or warning signs located on the unit.

1.10. The engine operates on gasoline. It is important to

keep in mind this unit cannot be run indoors. Carbon

Monoxide has no odor and can be fatal in a short period of

time.

1.11. Gasoline is highly flammable and is capable of causing

a large explosion. Please shut down the machine before

ever adding fuel or oil. When adding fuel or oil make sure it

is done in a well ventilated area. When filling the fuel tank be

sure you always leave enough space for natural fuel

inflation. Make sure to not smoke near fuel supply. Keep

away from all other flames, sparks, etc. Make sure to wipe

all leaked fuel on the unit before starting.

1.12 Take care when attaching your welding leads. Ensure

a solid connection at the lead terminals at all times. Inspect

your welding leads for damage before each use and never

allow them to sit in a damp environment. Avoid dragging

your welding leads, as this may cause the insulation to

become damaged.

1.13 Check the oil level prior to each use by removing the oil

dipstick. Do not operate the unit if it has become overfilled

with oil, as this can affect normal operations. In addition

make sure to change the oil on a regular basis.

1.14 Refrain from using the air compressor when welding.

Also, it is recommended that you disconnect all sources

from the generator as well when welding.

Lighting

Engine

Working voltage(V)

Lamp power(W)

Solenoid valve

Lifting gear pressure(MPa)

Lift height(mm)

AC120V/240V ±5%

LED/4×100W

2pcs/DC12V/5W

0.8 ±0.1

1800-4500

50A-200A

Welding

AC120/240V, 60Hz

2.Specifications

168KG

Note: Do not attempt to modify the control panel in any

way. This will void your warranty and could present the

potential for equipment failure and personal injury.

Component Identification

1．Main Switch

2．Air compressor switch

3．Display meter

4．Oil alarm

5．key switch

6．Welding adjustor

7. Socket for welding

8．lighting control switch

9．Push botton for lighting

10．Socket

11．Groud bolt

1. Engine Cover Plate 2. Fuel Tank 3. Fuel Petcock

4. Engine Pull-Start Assembly 5. Engine Choke Lever

6. Air Filter Assembly 7. Handle 8. Water Drain Valve

9. Muffler Assembly 10. Frame

1. Air Compressor Oil Drain Plug 2. Oil Sight Glass

3. AVR Cover Plate 4. Control Panel Case

5. Exhaust Port 6. Oil Fill Port

7. Air Compressor Cylinder Head 8. Air Filter

9. Air Supply Hose 10. Cover Plate

1. Engine Oil Drain Plug 2. Oil Fill Dipstick

3. Air Pressure Relay 4. A/C Switch

5. Safety Valve

1. Pressure Gauge 2. Air Pressure Regulator

3. Air Outlet Connectors 4. Pressure Gauge

5. Air Tank 6. Air Hose

7. Air Valve 8. Wheel Axle

9. Wheel

Indice

Altri manuali Kohler Generatore portatile

Kohler

Kohler 48RCLC Manuale utente

Kohler

Kohler 99EOZDJ Manuale utente

Kohler

Kohler PRO 3.7 Manuale utente

Kohler

Kohler 12RES Manuale utente

Kohler

Kohler 6VSG Manuale utente

Kohler

Kohler 10EG Manuale di istruzioni

Kohler

Kohler 5ERKM Manuale di istruzioni

Kohler

Kohler 26RCA Manuale utente

Kohler

Kohler SDMO DIESEL 4000 C5 Istruzioni per l’uso

Kohler

Kohler KD700 Manuale di istruzioni

Kohler

Kohler 8RESV Manuale utente

Kohler

Kohler 13ERG Manuale utente

Kohler

Kohler 14RCAL Manuale utente

Kohler

Kohler 18TRES Manuale utente

Kohler

Kohler 8.5RES Manuale di istruzioni

Kohler

Kohler PRO 3.7 E Manuale utente

Kohler

Kohler PRO 2.8 i Manuale utente

Kohler

Kohler 15/30RES Manuale utente

Kohler

Kohler 14/20RES Manuale utente

Kohler

Kohler TT-1640 Manuale utente

Kohler

Kohler 40-150EOZDJ Manuale utente

Kohler

Kohler 1.4BEOR-12V Manuale di istruzioni

Kohler

Kohler 48RCLB Manuale di istruzioni

Kohler

Kohler 18RESNT Manuale di istruzioni

Manuali Generatore portatile popolari di altre marche

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente

Wallenstein

Wallenstein GF5000A Manuale utente