Konica Minolta MS7000 MK II Manuale utente

0816-7732-01

0816-7732-01 CK

2004.6

konicaminolta.com

30mm

MS7000 MKII

User's Guide

Energy Star®

As an ENERGY STAR®Partner, we have determined that this machine meets the ENERGY

STAR®Guidelines for energy efficiency.

What is an ENERGY STAR®Product?

An ENERGY STAR®product has a special feature that allows it to automatically switch to a

“low-power mode” after a period of inactivity. An ENERGY STAR®product uses energy

more efficiently, saves you money on utility bills and helps protect the environment.

Only the setting of “Auto Power Save (15 min.)” complies with the Energy Star standard.

0816773201.book i ページ２００４年６月２４日　木曜日　午後６時１４分

P-1

SAFETY INFORMATION

This section contains detailed instructions on the operation and maintenance of this

machine. To achieve optimum utility of this device, all operators should carefully

read and follow the instructions in this manual. Please keep this manual in a handy

place near the machine.

Make sure you observe all of the precautions listed in this manual.

*Ver07

Please note that some parts of the contents of this section may not correspond with the purchased product.

Warning and Precaution Symbols

Meaning of Symbols

Ignoring this warning could cause serious injury or

even death.

Ignoring this caution could cause injury or damage

to property.

A triangle indicates a danger against which you should take precaution.

This symbol warns against cause burns.

A diagonal line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A black circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

0816773201.book 1 ページ２００４年６月２４日　木曜日　午後６時１４分

SAFETY INFORMATION

P-2

• Do not modify this product, as a fire, electrical shock, or break-

down could result. If the product employs a laser, the laser beam

source could cause blindness.

• Do not attempt to remove the covers and panels which have been

fixed to the product. Some products have a high-voltage part or a

laser beam source inside that could cause an electrical shock or

blindness.

• Only use the power cord supplied in the package. If a power cord

is not supplied, only use the power cord and plug that is specified

in POWER CORD INSTRUCTION. Failure to use this cord could

result in a fire or electrical shock.

• Use the power cord supplied in the package only for this machine

and NEVER use it for any other product. Failure to observe this

precaution could result in a fire or electrical shock.

• Use only the specified power source voltage. Failure to do that

could result in a fire or electrical shock.

• Do not use a multiple outlet adapter to connect any other appli-

ances or machines. Use of a power outlet for more than the

marked current value could result in a fire or electrical shock.

Do not unplug and plug in the power cord with a wet hand, as an

electrical shock could result.

Plug the power cord all the way into the power outlet. Failure to do

this could result in a fire or electrical shock.

• Do not scratch, abrade, place a heavy object on, heat, twist, bend,

pull on, or damage the power cord. Use of a damaged power cord

(exposed core wire, broken wire, etc.) could result in a fire or

breakdown.

Should any of these conditions be found, immediately turn OFF

the power switch, unplug the power cord from the power outlet,

and then call your authorized service representative.

• Do not use an extension cord, in principle. Use of an extension

cord could cause a fire or electrical shock. Contact your autho-

rized service representative if an extension cord is required.

0816773201.book 2 ページ２００４年６月２４日　木曜日　午後６時１４分

SAFETY INFORMATION

P-3

Do not place a flower vase or other container that contains water, or

metal clips or other small metallic objects on this product. Spilled

water or metallic objects dropped inside the product could result in a

fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter

get inside the product, immediately turn OFF the power switch,

unplug the power cord from the power outlet, and then call your

authorized service representative.

• Do not keep using this product, if this product becomes inordi-

nately hot or emits smoke, or unusual odor or noise. Immediately

turn OFF the power switch, unplug the power cord from the power

outlet, and then call your authorized service representative. If you

keep on using it as is, a fire or electrical shock could result.

• Do not keep using this product, if this product has been dropped

or its cover damaged. Immediately turn OFF the power switch,

unplug the power cord from the power outlet, and then call your

authorized service representative. If you keep on using it as is, a

fire or electrical shock could result.

Do not throw the toner cartridge or toner into an open flame. The hot

toner may scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a

grounding terminal.

0816773201.book 3 ページ２００４年６月２４日　木曜日　午後６時１４分

SAFETY INFORMATION

P-4

• Do not use flammable sprays, liquids, or gases near this product,

as a fire could result.

• Do not leave a toner unit or drum unit in a place within easy reach

of children. Licking or ingesting any of these things could injure

your health.

• Do not let any object plug the ventilation holes of this product.

Heat could accumulate inside the product, resulting in a fire or

malfunction.

• Do not install this product at a site that is exposed to direct sun-

light, or near an air conditioner or heating apparatus. The resultant

temperature changes inside the product could cause a malfunc-

tion, fire, or electrical shock.

• Do not place the product in a dusty place, or a site exposed to

soot or steam, near a kitchen table, bath, or a humidifier. A fire,

electrical shock, or breakdown could result.

• Do not place this product on an unstable or tilted bench, or in a

location subject to a lot of vibration and shock. It could drop or fall,

causing personal injury or mechanical breakdown.

• After installing this product, mount it on a secure base. If the unit

moves or falls, it may cause personal injury.

• Do not store toner units and PC drum units near a floppy disk or

watch that are susceptible to magnetism. They could cause these

products to malfunction.

The inside of this product has areas subject to high temperature,

which may cause burns. When checking the inside of the unit for

malfunctions such as a paper misfeed, do not touch the locations

(around the fusing unit, etc.) which are indicated by a “CAUTION

HOT” caution label.

Do not place any objects around the power plug as the power plug

may be difficult to pull out when an emergency occurs.

The socket-outlet shall be installed near the machine and shall be

easily accessible as the power plug may be difficult to pull out when

an emergency occurs.

0816773201.book 4 ページ２００４年６月２４日　木曜日　午後６時１４分

SAFETY INFORMATION

P-5

Precautions for Routine

• Always use this product in a well ventilated location. Operating the

product in a poorly ventilated room for an extended period of time

could injure your health. Ventilate the room at regular intervals.

• Whenever moving this product, be sure to disconnect the power

cord and other cables. Failure to do this could damage the cord or

cable, resulting in a fire, electrical shock, or breakdown.

• When moving this product, always hold it by the locations speci-

fied in the operator’s manual or other documents. If the unit falls it

may cause severe personal injury. The product may also be dam-

aged or malfunction.

• Remove the power plug from the outlet more than one time a year

and clean the area between the plug terminals. Dust that accumu-

lates between the plug terminals may cause a fire.

• When unplugging the power cord, be sure to hold onto the plug.

Pulling on the power cord could damage the cord, resulting in a

fire or electrical shock.

• Do not store toner units, PC drum units, and other supplies and

consumables in a place subject to direct sunlight and high temper-

ature and humidity, as poor image quality and malfunction could

result.

• Do not attempt to replace the toner unit and PC drum unit in a

place exposed to direct sunlight. If the PC drum is exposed to

intense light, poor image quality could result.

• Do not unpack a toner unit or PC drum unit until the very time of

use. Do not leave an unpacked unit standing. Install it immediately

or poor image quality could result.

• Do not keep toner units and PC drum units in an upright position

or upside down, as poor image quality could result.

• Do not throw or drop a toner unit or PC drum unit as poor image

quality could result.

• Do not use this product in an area where ammonia or other gases

or chemicals are present. Failure to do so may shorten the service

life of the product, cause damage or decrease performance.

• Do not use this product in an environment with a temperature out-

side the range specified in the operator’s manual, as a breakdown

or malfunction could result.

• Do not attempt to feed stapled paper, carbon paper or aluminum

foil through this product, as a malfunction or fire could result.

0816773201.book 5 ページ２００４年６月２４日　木曜日　午後６時１４分

SAFETY INFORMATION

P-6

Do not touch or scratch the surface of the toner unit developing roller

and the PC drum, as poor image quality could result.

Use the supplies and consumables recommended by the dealer. Use

of any supply or consumable not recommended could result in poor

image quality and breakdown.

0816773201.book 6 ページ２００４年６月２４日　木曜日　午後６時１４分

Welcome

This User’s Guide explains how to operate the unit and replenish its

supplies. It also gives some troubleshooting tips as well as general

precautions to be observed when operating the unit.

To ensure the best performance and effective use of your unit, read this

User’s Guide carefully until you familiarize yourself thoroughly with the

unit's operation and features.

Please keep this User’s Guide and use it as a quick and handy reference

tool for immediately clarifying any questions that may arise.

Please follow the instructions given in this User’s Guide when handling the

system and do not touch any part of the system the User’s Guide does not

cover.

NEVER attempt to disassemble or remodel the system.

The contents of this User’s Guide are subject to change without notice.

No part of this User’s Guide may be quoted, reproduced, or translated into

any other language.

0816773201.book i ページ２００４年６月２４日　木曜日　午後６時１４分

Altri manuali per MS7000 MK II

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Konica Minolta Scanner

Konica Minolta

Konica Minolta RX-II Manuale utente

Konica Minolta

Konica Minolta Color Centro IC-601 Manuale utente

Konica Minolta

Konica Minolta BIZHUB C252 Manuale utente

Konica Minolta

Konica Minolta PS5000C MKII Manuale utente

Konica Minolta

Konica Minolta PS 7000 Manuale utente

Konica Minolta

Konica Minolta Dimage Scan Elite 5400II Manuale utente

Konica Minolta

Konica Minolta bizhub PRESS 1052 Manuale utente

Konica Minolta

Konica Minolta MS 7000 Manuale utente

Konica Minolta

Konica Minolta ScanDIVA Manuale utente

Konica Minolta

Konica Minolta PS7000C MKII Manuale utente

Konica Minolta

Konica Minolta BIZHUB PRO 1050 Manuale utente

Konica Minolta

Konica Minolta Fujitsu fi-6800 Manuale utente

Konica Minolta

Konica Minolta DiMAGE Scan Dual IV Manuale utente

Konica Minolta

Konica Minolta SU-502 Manuale utente

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Manuale utente

Konica Minolta

Konica Minolta IV Manuale utente

Konica Minolta

Konica Minolta MS6000 MK II Manuale utente

Konica Minolta

Konica Minolta PW1-NS Manuale utente

Konica Minolta

Konica Minolta DR1600 Manuale utente

Konica Minolta

Konica Minolta PS5000C MKII Manuale utente

Konica Minolta

Konica Minolta SL1000 Digital Film Scanner Manuale utente

Konica Minolta

Konica Minolta bizhub 160 Manuale utente

Konica Minolta

Konica Minolta II Manuale utente

Konica Minolta

Konica Minolta Bizhub 222 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente