Kontron KTQ67/Flex-Medical Manuale utente

If it’s embedded, it’s Kontron

KTQ67/Flex-Medical Users Guide

KTD-N0849-C

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 2

Document revision history.

Revision

Date

Comment

Jan. 8th 2014

MLA

Added BIOS features: Force Boot Setup and PC Speaker/Beep.

Dec. 13th 2013

MLA

Revision merged KTD-N00829-E KTQ67 Users Guide.

Aug. 22nd 2013

MLA

First release

Aug. 26th 2011

MLA

Preliminary version

No part of this document may be reproduced or transmitted in any form or by any means, electronically

or mechanically, for any purpose, without the express written permission of KONTRON Technology A/S.

Trademark Acknowledgement:

Brand and product names are trademarks or registered trademarks of their respective owners.

Disclaimer:

KONTRON Technology A/S reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve design

and/or performance.

Specifications listed in this manual are subject to change without notice. KONTRON Technology

assumes no responsibility or liability for the use of the described product(s), conveys no license or title

under any patent, copyright, or mask work rights to these products, and makes no representations or

warranties that these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration purposes only.

KONTRON Technology A/S makes no representation or warranty that such application will be suitable

for the specified use without further testing or modification.

Life Support Policy

KONTRON Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF THE GENERAL

MANAGER OF KONTRON Technology A/S.

As used herein:

Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with

instructions for use provided in the labelling, can be reasonably expected to result in significant injury to

the user.

A critical component is any component of a life support device or system whose failure to perform can

be reasonably expected to cause the failure of the life support device or system, or to affect its safety or

effectiveness.

Document details

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 3

KONTRON Technology Technical Support & Services

If you have questions about installing or using your KONTRON Technology Product, check this User’s

Manual first – you will find answers to most questions here. To obtain support, please contact your local

Distributor or Field Application Engineer (FAE).

Before Contacting Support: Please be prepared to provide as much information as possible:

•CPU Board

1. Type.

2. Part Number (find PN on label)

3. Serial Number if available (find SN on label)

•Configuration

1. CPU Type, Clock speed

2. DRAM Type and Size.

3. BIOS Revision (Find the Version Info in the BIOS Setup).

4. BIOS Settings different than Default Settings (Refer to the BIOS Setup Section).

•System

1. O/S Make and Version.

2. Driver Version numbers (Graphics, Network, and Audio).

3. Attached Hardware: Harddisks, CD-rom, LCD Panels etc.

Warranty

KONTRON Technology warrants its products to be free from defects in material and workmanship

during the warranty period. If a product proves to be defective in material or workmanship during the

warranty period, KONTRON Technology will, at its sole option, repair or replace the product with a

similar product.

Replacement Product or parts may include remanufactured or refurbished parts or components.

The warranty does not cover:

1. Damage, deterioration or malfunction resulting from:

A. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

B. Repair or attempted repair by anyone not authorized by KONTRON Technology.

C. Causes external to the product, such as electric power fluctuations or failure.

D. Normal wear and tear.

E. Any other causes which does not relate to a product defect.

2. Removal, installation, and set-up service charges.

Exclusion of damages:

KONTRON TECHNOLOGY LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT

OF THE PRODUCT. KONTRON TECHNOLOGY SHALL NOT BE LIABLE FOR:

1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT,

DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF

TIME, LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL,

INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS,

EVEN IF ADVISED OF THEIR POSSIBILITY OF SUCH DAMAGES.

2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.

Document details

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 4

Contents

Introduction .............................................................................................7

1Installation procedure........................................................................8

1.1 Installing the board .......................................................................................................................... 8

1.2 Requirement according to IEC60950 ................................................................................................... 9

2System Specification ........................................................................10

2.1 Component main data ..................................................................................................................... 10

2.2 System overview ............................................................................................................................. 14

2.3 Processor Support Table .................................................................................................................. 16

2.4 System Memory support................................................................................................................... 19

2.5 KTQ67 Graphics Subsystem............................................................................................................... 20

2.5.1 Intel® HD Graphics 3000 (example) ................................................................................................ 20

2.6 Power Consumption ........................................................................................................................ 21

3Connector Locations .........................................................................24

3.1 KTQ67/Flex-Medical – frontside........................................................................................................ 24

4Connector Definitions.......................................................................26

5IO-Area Connectors...........................................................................27

5.1 Display connectors (IO Area)............................................................................................................ 27

5.1.1 DVI (lower) connector – DVI-I ......................................................................................................... 27

5.1.2 DVI-D (upper) connector – DVI-D..................................................................................................... 28

5.2 Ethernet Connectors (IO Area).......................................................................................................... 29

5.3 USB Connectors (IO Area) ................................................................................................................ 30

5.3.1 USB Connector 0/1/2/3 (USB0/1/2/3)............................................................................................ 30

5.4 COM1 and COM2 Connectors (IO Area) ............................................................................................... 31

6Internal Connectors..........................................................................32

6.1 Power Connector (ATX/BTXPWR)....................................................................................................... 32

6.2 Fan Connectors (FAN_CPU) (J28) and (FAN_SYS) (J29).......................................................................33

6.3 PS/2 Keyboard and Mouse connector (KBDMSE) (J15)......................................................................... 34

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 5

6.4 Display connectors (Internal)........................................................................................................... 35

6.4.1 LVDS Flat Panel Connector (LVDS) (J39) (optionally)......................................................................... 35

6.5 SATA (Serial ATA) Disk interface (J22 – J27) ...................................................................................... 36

6.6 USB Connectors (USB)..................................................................................................................... 37

6.6.1 USB Connector 6/7 ........................................................................................................................ 37

6.6.2 USB Connector 8/9 (USB8/9) (J18).................................................................................................37

6.6.3 USB Connector 10/11 (USB10/11) (J17).......................................................................................... 38

6.6.4 USB Connector 12/13 (USB12/13) (J16).......................................................................................... 38

6.7 Serial COM3 – COM4 Ports (J20, J21)................................................................................................. 39

6.8 Audio Connector ............................................................................................................................. 40

6.8.1 Line2 and Mic2 .............................................................................................................................. 40

6.8.1 Audio Header Connector (AUDIO_HEAD) (J47) .................................................................................40

6.9 Power Button Connector (PWRBTN) (J48) ..........................................................................................41

6.10 Front Panel Connector (FRONTPNL) (J36) ..........................................................................................42

6.11 Feature Connector (FEATURE) (J30) .................................................................................................. 43

6.12 ”Load Default BIOS Settings” Jumper (J11) .......................................................................................45

6.13 ClrRTC (J12) ................................................................................................................................... 45

6.14 SPI Recover Jumper (J41)................................................................................................................ 46

6.15 SPI Connector (SPI) (J40)................................................................................................................ 47

6.16 XDP-CPU (Debug Port for CPU) (J14) ................................................................................................. 48

6.17 XDP-PCH (Debug Port for Chipset) (J13) ............................................................................................ 49

7Slot Connectors (PCIe, PCI)...............................................................50

7.1 PCIe Connectors.............................................................................................................................. 50

7.1.1 PCI-Express x16 Connector (PCIe x16).............................................................................................. 50

7.1.3 PCI-Express x4 Connector (PCIe x4) (J33) ........................................................................................ 52

7.2 PCI Slot Connectors ........................................................................................................................ 53

7.2.1 Signal Description – PCI Slot Connector ........................................................................................... 54

7.2.2 KTQ67 PCI IRQ & INT routing ........................................................................................................... 55

8On-board - & mating connector types .................................................56

9System Resources.............................................................................57

9.1 Memory Map................................................................................................................................... 57

9.2 PCI Devices .................................................................................................................................... 58

9.3 Interrupt Usage .............................................................................................................................. 59

9.4 IO Map........................................................................................................................................... 60

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 6

10 BIOS................................................................................................61

10.1 Main.............................................................................................................................................. 61

10.2 Advanced....................................................................................................................................... 62

10.2.1 Advanced -PCI Subsystem Settings ................................................................................................ 63

10.2.2 Advanced -APCI Settings ............................................................................................................. 68

10.2.3 Advanced -Trusted Computing ...................................................................................................... 69

10.2.4 Advanced -CPU Configuration ....................................................................................................... 70

10.2.5 Advanced -SATA Configuration...................................................................................................... 72

10.2.6 Advanced -Intel ® Rapid Start Technology ..................................................................................... 76

10.2.7 Advanced -Intel TXT (LT) Configuration.......................................................................................... 77

10.2.8 Advanced -Intel ® Anti-Theft Technology Configuration .................................................................. 78

10.2.9 Advanced -AMT Configuration ....................................................................................................... 79

10.2.10 Advanced -Acoustic Management Configuration .............................................................................81

10.2.11 Advanced -USB Configuration....................................................................................................... 82

10.2.12 Advanced -SMART Settings ........................................................................................................... 83

10.2.13 Advanced -Super IO Configuration................................................................................................. 84

10.2.14 Advanced -Voltage Monitor .......................................................................................................... 89

10.2.15 Advanced -Hardware Health Configuration..................................................................................... 90

10.2.16 Advanced -LAN Configuration ....................................................................................................... 92

10.2.17 Advanced -Delay Startup.............................................................................................................. 94

10.2.18 Advanced -Serial Port Console Redirection .....................................................................................95

10.2.19 Advanced -CPU PPM Configuration................................................................................................. 99

10.3 Chipset ........................................................................................................................................ 100

10.3.1 PCH-IO Configuration................................................................................................................... 101

10.3.2 System Agent (SA) Configuration .................................................................................................. 106

10.4 Boot............................................................................................................................................ 120

10.4.1 CSM16 parameters ....................................................................................................................... 122

10.4.2 Force Boot Setup ......................................................................................................................... 123

10.4.3 CSM parameters........................................................................................................................... 124

10.5 Security ....................................................................................................................................... 125

10.5.1 HDD Security Configuration .......................................................................................................... 126

10.6 Save & Exit................................................................................................................................... 127

11 AMI BIOS Beep Codes ......................................................................128

12 OS Setup........................................................................................129

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 7

Introduction

This manual describes the KTQ67/Flex-Medical made by KONTRON Technology A/S. In this manual

the board will also be denoted KTQ67.

The KTQ67/Flex-Medial is based on the Q67 chipset, support 2nd and 3rd generation Intel® i7 -, i5 -,

i3 2Core and 4Core processor and the Celeron B810 2Core, see “Processor Support Table for more

specific details.

Use of this Users Guide implies a basic knowledge of PC-AT hard- and software. This manual is

focused on describing the KTQ67 board special features and is not intended to be a standard PC-AT

textbook.

New users are recommended to study the short installation procedure stated in the following chapter

before switching-on the power.

All configuration and setup of the CPU board is either done automatically or manually by the user via

the BIOS setup menus. Only exception is the “Load Default BIOS Settings” Jumper.

Introduction

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 8

Warning: Turn off PSU (Power Supply Unit) completely (no mains power connected to the

PSU) or leave the Power Connectors unconnected while configuring the board. Otherwise

components (DRAM, LAN cards etc.) might get damaged. Make sure PSU has 3.3V monitoring

watchdog (standard ATX PSU feature), running the board without 3.3V will damage the board

within minutes.

Warning: When mounting the board to chassis etc. please notice that the board contains

components on both sides of the PCB which can easily be damaged if board is handled

without reasonable care. A damaged component can result in malfunction or no function at all.

1 Installation procedure

1.1 Installing the board

To get the board running, follow these steps. If the board shipped from KONTRON has already

components like DRAM, CPU and cooler mounted, then relevant steps below, can be skipped.

1. Turn off the PSU (Power Supply Unit)

2. Insert the DRAM(s) (UDIMM 240pin)

Be careful to push it in the slot(s) before locking the tabs. For a list of approved DRAM contact your

Distributor or FAE. See also chapter “System Memory Support”.

3. Install the processor

The CPU is keyed and will only mount in the CPU socket in one way. Use finger to open/ close the

CPU socket. Refer to supported processor overview for details.

4. Cooler Installation

Use heat paste or adhesive pads between CPU and cooler and connect the Fan electrically to the

FAN_CPU connector.

5. Connecting Interfaces

Insert all external cables for hard disk, keyboard etc. A monitor must be connected in order to be

able change BIOS settings.

6. Connect and turn on PSU

Connect PSU to the board by the ATX/BTXPWR and the 4-pin ATX+12V connectors.

7. Power Button

The PWRBTN_IN must be toggled to start the Power supply; this is done by shorting pins 16

(PWRBTN_IN) and pin 18 (GND) on the FRONTPNL connector (see Connector description). A

“normally open” switch can be connected via the FRONTPNL connector.

8. BIOS Setup

Enter the BIOS setup by pressing the <Del> key during boot up.

Enter Exit Menu and Load Optimal Defaults.

Refer to the “BIOS Configuration / Setup“ section of this manual for details on BIOS setup.

9. Mounting the board to chassis

When fixing the Motherboard on a chassis it is recommended using screws with integrated washer and

having diameter of ~7mm.

Note: Do not use washers with teeth, as they can damage the PCB and may cause short circuits.

Installation procedure

Note: To clear all BIOS settings, including Password protection, activate “Load Default BIOS Settings”

Jumper for ~10 sec (without power connected).

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 9

1.2 Requirement according to IEC60950

Users of KTQ67 should take care when designing chassis interface connectors in order to fulfil the

IEC60950 standard:

Lithium Battery precautions:

CAUTION!

Danger of explosion if battery is incorrectly

replaced.

Replace only with same or equivalent type

recommended by manufacturer.

Dispose of used batteries according

to the manufacturer’s instructions.

VORSICHT!

Explosionsgefahr bei unsachgemäßem

Austausch der Batterie.

Ersatz nur durch den selben oder einen vom

Hersteller empfohlenen gleichwertigen Typ.

Entsorgung gebrauchter Batterien nach

Angaben des Herstellers.

ADVARSEL!

Lithiumbatteri – Eksplosionsfare ved fejlagtig

håndtering.

Udskiftning må kun ske med batteri

af samme fabrikat og type.

Levér det brugte batteri tilbage til leverandøren.

ADVARSEL

Eksplosjonsfare ved feilaktig skifte av batteri.

Benytt samme batteritype eller en tilsvarende

type anbefalt av apparatfabrikanten.

Brukte batterier kasseres i henhold til

fabrikantens

instruksjoner.

VARNING

Explosionsfara vid felaktigt batteribyte.

Använd samma batterityp eller en ekvivalent

typ som rekommenderas av apparattillverkaren.

Kassera använt batteri enligt fabrikantens

instruktion.

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti

asennettu.

Vaihda paristo ainoastaan laltevalmistajan

suosittelemaan

tyyppiin. Hävitä käytetty paristo valmistajan

ohjeiden

mukaisesti.

When an interface/connector has a VCC (or other power) pin, which is directly connected to a power

plane like the VCC plane:

To protect the external power lines of the peripheral devices, the customer has to take care about:

•That the wires have suitable rating to withstand the maximum available power.

•That the enclosure of the peripheral device fulfils the fire protecting requirements of IEC60950.

Installation procedure

KTQ67/Flex -Medical Users Guide

KTD-N0849-C Page 10

2 System Specification

2.1 Component main data

The table below summarizes the features of the KTQ67/Flex –Medical embedded motherboard.

Form factor

KTQ67/Flex-Medical: Flex-ATX (190,5 mm by 228,6 mm)

Processor

Support the following Intel® Core™ processors via Socket H2 (LGA1155), ZIF Socket

•Intel® Core™ i7, 2nd and 3rd Generation

•Intel® Core™ i5, 2nd and 3rd Generation

•Intel® Core™ i3, 2nd and 3rd Generation

•Intel® Pentium® Desktop

•1066/1333MHz system bus and 3/6/8MB internal cache.

(Intel® Pentium® Desktop G622 only 1066MHz)

•Up to 95W (Thermal Guideline)

Memory

•4x DDR3 UDIMM 240pin socket

•Support single and dual ranks DDR3 1066/1333MT/s

(PC3-8500/PC3-10600)

•Support system memory from 256MB and up to 4x 8GB

Note: Less than 4GB displayed in System Properties using 32bit OS

(Shared Video Memory/PCI resources is subtracted)

•ECC not supported (chipset limitation)

Chipset

Intel Q67 PCH (Platform Controller Hub)

•Intel ® VT-d (Virtualisation Technology for Directed I/O)

•Intel ® TXT (Trusted Execution Technology)

•Intel ® vPRO

•Intel ® AMT (Active Management Technology) version 8

•Intel ® AT (Anti-Theft Technology)

•Intel ® HD Audio Technology

•Intel ® RST (Rapid Storage Technology)

•Intel ® RRT (Rapid Recover Technology)

•SATA (Serial ATA) 6Gb/s and 3Gb/s.

•USB revision 2.0

•PCI Express revision 2.0

•ACPI 3.0b compliant

•Dual Display support (Dual Graphic Pipes)

•Blue-ray HD video playback

Security

•Intel® Integrated TPM 1.2 support

Management

•Intel® Active Management Technology (Intel® AMT) 8.0

Audio

Audio, 7.1 Channel High Definition Audio Codec using the VIA 1708B codec

•Line-out

•Line-in

•Surround output: SIDE, LFE, CEN, BACK and FRONT

•Microphone: MIC1 and MIC2

•CDROM in

•SPDIF (electrical Interface only)

•On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)

System Specification

Indice

Altri manuali Kontron Hardware per computer

Kontron

Kontron COM Express Eval 10 Manuale utente

Kontron

Kontron KTGM45/mITX Manuale utente

Kontron

Kontron 3.5-SBC-APL V2.0 Manuale utente

Kontron

Kontron AT8402 Manuale utente

Kontron

Kontron ePCI-201 Manuale utente

Kontron

Kontron SL iMX6UL Manuale utente

Kontron

Kontron Kiss 2U Manuale utente

Kontron

Kontron CP6500-V Manuale utente

Kontron

Kontron ePanel-C3 Manuale utente

Kontron

Kontron cPCI-MXS64GX Manuale del prodotto

Kontron

Kontron coolMonster/PM Manuale utente

Kontron

Kontron nanoETXexpress-SP Manuale utente

Kontron

Kontron coolMonster/PM Manuale utente

Kontron

Kontron COMe-mTT10 Manuale utente

Kontron

Kontron COMe-cDC2 Manuale utente

Kontron

Kontron CP-ADAP-P47-PB (3U) Manuale utente

Kontron

Kontron COMe-cBTi6R E3845 8GB/16S Manuale utente

Kontron

Kontron PCI-946-1 Manuale del prodotto

Kontron

Kontron CP6002 Manuale utente

Kontron

Kontron MSP8040 Series Manuale utente

Kontron

Kontron 11529 Manuale utente

Kontron

Kontron MOPS/386A Manuale utente

Kontron

Kontron CP3003-SA Manuale utente

Kontron

Kontron MITX-CFL0 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

Advantech

Advantech ASMB-935 Series Manuale utente

Jupiter

Jupiter RAM PACK Manuale utente