Kramer VM-8HN Manuale utente
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
VM-8HN
1:8+2 HDMI Looping DA
P/N: 2900-300427 Rev 4
VM-8HN – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the VM-8HN 1:8+2 HDMI Looping DA 5
4Installing in a Rack 8
5Connecting the VM-8HN 9
5.1 Acquiring an EDID 10
5.2 Setting the DIP-Switches 11
6Protocol 3000 12
6.1 Command Summary 12
6.2 Command Details 12
6.3 EDID Source 16
6.4 Signal Validation 16
6.5 Stage 16
6.6 HDCP Types 16
7Technical Specifications 17
Figures
Figure 1: VM-8HN 1:8+2 HDMI Looping DA Front Panel 6
Figure 2: VM-8HN 1:8+2 HDMI Looping DA Rear Panel 7
Figure 3: Connecting the VM-8HN 1:8+2 HDMI Looping DA 10
VM-8HN - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer VM-8HN 1:8+2 HDMI Looping DA,
which is ideal for the following typical applications:
Digital signage
Entertainment
Rental and staging
2
VM-8HN - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer VM-8HN away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
!
VM-8HN - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility.
!
4
VM-8HN - Overview
3 Overview
The VM-8HN is a high-quality 1:8 HDMI distributor with 2 looping HDMI outputs
that takes one HDMI input, equalizes and reclocks the signal and distributes it to
eight identical outputs and two loops. The VM-8HN distributes signals having
resolutions up to 4Kx2K 30Hz and including WUXGA and 1080p.
In particular, the VM-8HN features:
A maximum data rate of 10.2Gbps (3.4Gbps per graphic channel)
HDMI support for Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed
Audio Channels, Dolby TrueHD, DTS-HD, CEC (CEC pass through from
input to output 1 only)
HDCP compliance
Video wall support that mutes the video on all displays and simultaneously
unmutes them when all inputs are ready; with selectable output delay.
Automatic 5V turn off - When no active input signal is detected, the unit turns
off 5V on the output allowing attached devices to power off.
MAC Setting enables and disables HDCP support on the input allowing the
source to transmit a non−HDCP signal if required.
Force RGB modifies the EDID saved on the input to support RGB format
(that is, not YUV format).
Kramer Equalization & re-Klocking™ Technology that rebuilds the digital
signal integrity to travel longer distances
I-EDIDPro™ Kramer Intelligent EDID Processing™, an intelligent EDID
handling and processing algorithm that ensures Plug and Play operation for
HDMI systems
A default EDID for fast and efficient connection of the unit
The default EDID feature lets you connect the VM-8HN without having to connect a
display to the output
Support for EDID Designer
3D pass-through
VM-8HN - Overview
5
3.1 Defining the VM-8HN 1:8+2 HDMI Looping DA
This section defines the VM-8HN.
6
VM-8HN - Overview
VM-8HN –Overview
6
Figure 1: VM-8HN 1:8+2 HDMI Looping DA Front Panel
#
Feature
Function
1
ON LED
Lights when the device is powered on
2
EDID READ Button
Press to select the chosen output
3
EDID SELECT Button
Press to sequentially cycle through the outputs
4
IN LED
Lights when an active input signal is detected
5
OUT LED (1-8)
Lights when an active output acceptor is detected, flashes when HDCP is not supported by the monitor
6
LOOP LED (1-2)
Lights when an active output loop acceptor is detected
7
PROGRAM mini USB Connector
Use to upgrade the device firmware, also works with the EDID Designer
VM-8HN - Overview
7
Figure 2: VM-8HN 1:8+2 HDMI Looping DA Rear Panel
#
Feature
Function
8
INPUT Connector
Connects to the HDMI source
9
OUT Connector (1-8)
Connect to up to 8 HDMI acceptors
10
LOOP Connector (1-2)
Connect to up to 2 HDMI loop acceptors
11
SETUP DIP-Switches
Adjust to set output delay, automatic power off for the 5V output, MAC mode, programming, force RGB
MAC settings enable the system to force the source to input non-HDCP content.
Force RGB forces the source to send video with an RGB color space.
12
RESET Button
Press to return to default EDID
13
Power Socket, Fuse and Switch
Connects power to and switches the unit on and off
7
VM-8HN –Overview
Altri manuali per VM-8HN
1
Indice
Altri manuali Kramer Amplificatore
Kramer
Kramer VM-10H2 Manuale utente
Kramer
Kramer PT-101R Manuale utente
Kramer
Kramer 908 Manuale utente
Kramer
Kramer VM-20HDxl Manuale utente
Kramer
Kramer TP-50 Manuale utente
Kramer
Kramer TOOLS VP-210XL Manuale utente
Kramer
Kramer VM-114H Manuale utente
Kramer
Kramer TOOLS 900xl Manuale utente
Kramer
Kramer VP-3 Manuale utente
Kramer
Kramer VM-5ARII Manuale utente
Kramer
Kramer VM-50AN Manuale utente
Kramer
Kramer PT-102AN Manuale utente
Kramer
Kramer 104LN Manuale utente
Kramer
Kramer PA-50HZ Manuale utente
Kramer
Kramer VP-22 Manuale utente
Kramer
Kramer PA-50HZ Manuale utente
Kramer
Kramer 104LN Manuale utente
Kramer
Kramer VP-200N-5 Manuale utente
Kramer
Kramer VM-8HN Manuale utente
Kramer
Kramer VM-100YC Manuale utente
