Kramer VP-2L Manuale utente

KRAMER ELECTRONICS LTD.

USER MANUAL

MODEL:

VP-2L

UXGA Line Amplifier

P/N: 2900-000239 Rev 3

VP-2L – Contents i

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

3Overview 3

3.1 Defining the VP-2L UXGA Line Amplifier 4

4Connecting the VP-2L 5

5Technical Specifications 7

Figures

Figure 1: VP-2L UXGA Line Amplifier 4

Figure 2: Connecting the VP-2L 6

VP-2L - Introduction 1

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront the video, audio, presentation, and broadcasting

professional on a daily basis. In recent years, we have redesigned and upgraded

most of our line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix

Switchers; GROUP 3: Control Systems; GROUP 4: Format/Standards Converters;

GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;

GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors;

GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters and

GROUP 11: Sierra Products.

Congratulations on purchasing your Kramer VP-2L UXGA Line Amplifier, which is

ideal for the following typical applications:

•Conference room presentations and advertising applications

•Rental and staging

2 VP-2L - Getting Started

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

•Review the contents of this user manual

Use Kramer high performance high resolution cables

Go to http://www.kramerelectronics.com to check for up-to-date

user manuals, application programs, and to check if firmware

upgrades are available (where appropriate).

Caution: No operator serviceable parts inside the unit

Warning: Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning: Disconnect the power and unplug the unit from the

wall before installing

2.1 Achieving the Best Performance

To achieve the best performance:

•Use only good quality connection cables to avoid interference, deterioration

in signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

•Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

•Position your Kramer VP-2L away from moisture, excessive sunlight and

dust

VP-2L - Overview 3

3 Overview

The Kramer VP-2L is a high performance line amplifier for computer graphics

video signals (up to UXGA) and HD signals. It accepts an input on a 15-pin HD

connector and provides a buffered output, also on a 15-pin HD connector.

In particular, the VP-2L UXGA Line Amplifier features:

•Resolution of up to UXGA, ensuring that it remains transparent even in the

most critical applications

•Trimmers for output level and cable equalization

•An ID Bit control switch

•A LED power indicator

•A small enclosure housing

•A 5V DC power supply

4 VP-2L - Overview

3.1 Defining the VP-2L UXGA Line Amplifier

This section defines the VP-2L.

Figure 1: VP-2L UXGA Line Amplifier

# Feature Function

1 LEVEL Control Trimmer Adjusts the video signal level

Use a screwdriver to rotate the trimmer, adjusting the

appropriate level

2 EQ. Control Trimmer Adjusts the video EQ. (equalization) compensation

3 OUTPUT 15-pin HD Connector Connect to the computer graphics acceptor

4 ON LED Illuminates when receiving power

5 INPUT 15-pin HD Connector Connect to the computer graphics source

6 5V DC +5V DC connector for powering the unit

7 ID Bit Switch Slide to the right to set to ON; to the left to set to

OFF

ON is the default that enables the notebook or laptop to

output a VGA signal to an external VGA monitor

VP-2L - Connecting the VP-2L 5

4 Connecting the VP-2L

Always switch off the power to each device before connecting it to your

VP-2L. After connecting your VP-2L, connect its power and then

switch on the power to each device.

To connect your VP-2L UXGA Line Amplifier, as the example in Figure 2 illustrates,

do the following:

1. Connect a computer graphics source to the INPUT 15-pin HD connector.

2. Connect the OUTPUT 15-pin HD connector to an acceptor (for example, a

display).

3. Connect the 5V DC power adapter to the 5V DC socket and connect the

transformer to the mains electricity or use the included USB cable to power

the unit as described below.

4. If required, adjust the video output signal level and/or cable compensation

equalization level.

Use a screwdriver to rotate the trimmers to adjust the appropriate level.

The VP-2L is supplied with the USB cable that:

•Has a USB-A connector at one end and a 5V DC jack at the other

•Connects to any USB port to power the unit

The internal Kramer P/N for this USB cable is 2518-0214003 C-UAM/DC35(THREAD)-3

To connect the VP-2L UXGA Line Amplifier using this cable:

1. Connect the 5V DC jack of the cable to the 5V DC socket of the VP-2L

(instead of using the 5V DC power adapter) and connect the USB-A

connector of the cable to the USB port of the display or computer.

The VP-2L receives power from the display or computer without needing a

power supply.

6 VP-2L - Connecting the VP-2L

Figure 2: Connecting the VP-2L

VP-2L - Technical Specifications 7

5 Technical Specifications

INPUT: 1 UXGA on a 15-pin HD connector

OUTPUT: 1 UXGA on a 15-pin HD connector

MAX. OUTPUT LEVEL: 1.5Vpp

RESOLUTION: Up to UXGA

DIFF. GAIN: 2.7%

DIFF. PHASE: 0.09°

K-FACTOR: 0.1%

S/N RATIO: 73dB

CONTROLS: Level: –7.4dB to +4dB; EQ.: 0 to +26.4dB

COUPLING: DC

POWER SOURCE: 5V DC, 307mA

DIMENSIONS: 4.27cm x 5.64cm x 2.2cm (1.68" x 2.22" x 0.87") W, D, H.

WEIGHT: 0.14kg (0.31lbs) approx.

ACCESSORIES: Power supply, C-GM/GM-3 molded 15-pin HD to 15-pin HD

cable, USB cable (internal Kramer P/N: 2518-0214003

C-UAM/DC35(THREAD)-3)

Specifications are subject to change without notice at http://www.kramerelectronics.com

Altri manuali per VP-2L

Indice

Altri manuali Kramer Amplificatore

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente