Kramer FC-41 Manuale utente
KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
FC-41
HD-SDI to Component
Converter
P/N: 2900-000328 Rev 4
FC-41 – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the FC-41 HD-SDI to Component Converter 4
4Installing in a Rack 7
5Connecting the FC-41 8
5.1 Connecting to the FC-41 via RS-232 9
6Using the FC-41 HD-SDI to Component Converter 11
6.1 Locking the Front Panel 11
6.2 Operating the FC-41 HD-SDI to Component Converter 11
7Technical Specifications 13
8Communication Protocol 14
Figures
Figure 1: FC-41 HD-SDI to Component Converter Front Panel 5
Figure 2: FC-41 HD-SDI to Component Converter Rear Panel 6
Figure 3: Connecting the FC-41 HD-SDI to Component Converter 9
Figure 4: Crossed Cable RS-232 Connection 10
Figure 5: Straight Cable RS-232 Connection with a Null Modem Adapter 10
FC-41 - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 14 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11:
Sierra Video Products; GROUP 12: Digital Signage; GROUP 13: Audio; and
GROUP 14: Collaboration.
Congratulations on purchasing your Kramer FC-41 HD-SDI to Component
Converter, which is ideal for the following typical applications:
Broadcast and production video studios
Postproduction and duplication studios
Non-linear editing
2
FC-41 - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com/support/product_downloads.asp
to check for up-to-date user manuals, application programs, and to check
if firmware upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer FC-41 away from moisture, excessive sunlight and
dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!
FC-41 - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the power cord that is supplied with the unit
Warning:
Do not open the unit. High voltages can cause
electrical shock! Servicing by qualified personnel only
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
!
4
FC-41 - Overview
3 Overview
The Kramer FC-41 is a high performance converter for HD-SDI. It converts an
HD-SDI input signal to component (Y, PB, PR) and RGB/HV signals.
In addition, the FC-41 features:
Component and SDI outputs on BNC connectors, and an RGBHV output on
a 15-pin HD computer graphics video connector
An SDI input which is reclocked and equalized, and distributed to two
HD-SDI outputs
Output resolution which is the same as that of the input and is compatible
with 720p and 1080i up to 60Hz, as well as 1080p up to 30Hz
ProcAmp controls, with memory for saving and loading 16 setups
A component output with tri-level syncs
A highly accurate color bar generator with eight built-in test patterns
A lockable front panel to prevent unintentional tampering with the unit
The FC-41 converter can be controlled via its front panel with a user-friendly LCD,
and also has an RS-232 interface. It is housed in a 19” 1U rack mountable
enclosure, and is fed from a 100-240 VAC universal switching power supply.
3.1 Defining the FC-41 HD-SDI to Component Converter
This section defines the FC-41.
FC-41 - Overview
5
FC-41 –Overview
5
Figure 1: FC-41 HD-SDI to Component Converter Front Panel
#
Feature
Function
1
POWER Switch
Illuminated switch for turning the unit ON or OFF
2
SETUP / MENU LCD Display
Displays the setup and the menu
3
MENU Button
Press to open the menu (see Section 6.2)
4
ENTER Button
Press to load and save a set up, and to accept changes
5
Button
Press to decrease numerical values or select from several definitions
6
Button
Press to move up the menu list values
7
Button
Press to increase numerical values or select from several definitions
8
Button
Press to move down the menu list
9
LOCK Button
Press and hold for about 3 seconds to lock/unlock the front panel buttons
6
FC-41 - Overview
Figure 2: FC-41 HD-SDI to Component Converter Rear Panel
#
Feature
Function
10
SDI IN BNC Connector
Connects to the HD/SD SDI source
11
OUTPUTS
SDI BNC Connector
Connects to the HD-SDI acceptor (the output is reclocked and equalized)
12
SDI BNC Connector
Connects to the HD-SDI acceptor (the output is reclocked and equalized)
13
Y BNC Connector
Connects to the component video acceptor
14
PB BNC Connector
15
PR BNC Connector
16
RGB/HV 15-pin HD Connector
Connects to the RGB or RGBHV acceptor
17
RS-232 9-pin D-sub Port
Connect to the PC or the remote controller
18
Power Connector with Fuse
AC connector, enabling power supply to the unit
6
FC-41 –Overview
FC-41 - Installing in a Rack
7
4 Installing in a Rack
This section provides instructions for rack mounting the unit.
Indice
Altri manuali Kramer Convertitore multimediale
Kramer
Kramer KDS-100EN Manuale utente
Kramer
Kramer VP-410 Manuale utente
Kramer
Kramer VP-475UX Manuale utente
Kramer
Kramer VP-426H2 Manuale utente
Kramer
Kramer VP-792 Manuale utente
Kramer
Kramer FC-17 Manuale utente
Kramer
Kramer FC-331A Manuale utente
Kramer
Kramer VP-503XL Manuale utente
Kramer
Kramer DigiTOOLS 6410N Manuale utente
Kramer
Kramer 401C Manuale utente
Kramer
Kramer VP-425 Manuale utente
Kramer
Kramer VP-421 Manuale utente
Kramer
Kramer FC-113 Manuale utente
Kramer
Kramer VP-426C Manuale utente
Kramer
Kramer FC-42 Manuale utente
Kramer
Kramer VM-2DH Manuale utente
Kramer
Kramer VA-40 Manuale utente
Kramer
Kramer VM-28H Manuale utente
Kramer
Kramer VP-451 Manuale utente
Kramer
Kramer KDS-USB2 Kit Manuale utente
