Kramer VM-1610 Manuale utente

VM-1610 Quick Start

P/N:

2900- 301268QS

Rev:

Scan for full manual

VM-1610 Quick Start Guide

This guide helps you install and use your VM-1610 for the first time.

Go to www.kramerav.com/downloads/VM-1610 to download the latest user manualand check if firmware

upgrades are available.

Step 1: Check what’s in the box

VM-1610 Balanced Audio-Stereo Distributor

4 Rubber feet

1 Power cord

1 Quick start guide

Step 2: Get to know your VM-1610

Feature

Function

POWER Switch

Illuminated power switch to turn the unit on and off.

CH 2 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 2.

MODE (1:10, 2x1:5) Button

Press to select 2x1:5 output, release to select 1:10 output.

CH 1 LEVEL (LEFT, RIGHT) Trimmers

Turn to adjust the left and right audio gains of channel 1.

CHANNEL 1 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (1 to 5).

CHANNEL 1 INPUT Terminal Block

Connect to balanced stereo source 1.

CHANNEL 2 INPUT Terminal Block

Connect to balanced stereo source 2.

CHANNEL 2 OUT Terminal Blocks

Connect to the channel 1 balanced stereo acceptors (6 to 10) or connect to the

channel 2 balanced stereo acceptors (1 to 5).

Power Connector with Fuse

AC connector enabling power supply to the unit.

Step 3: Mount VM-1610

To rack mount the machine, attach both rack ears

(by removing the screws from each side of the

machine and replacing those screws through the

rack ears) or place the machine on a table.

•Ensure that the environment (e.g., maximum ambient temperature &

air flow) is compatible for the device.

•Avoid uneven mechanical loading.

•Appropriate consideration of equipment nameplate ratings should be

used for avoiding overloading of the circuits.

•Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-1610.

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-1610.

Using third-party cables may cause damage!

Step 5: Connect power

Connect the power cord to VM-1610 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the

terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the

bottom of the unit.

Step 6: Operate VM-1610

1. Set the MODE (1:10, 2x1:5) button to the required connection mode.

2. If required, adjust the level trimmers with a small screwdriver.

Altri manuali per VM-1610

Indice

Altri manuali Kramer Convertitore multimediale

Kramer

Kramer PT-101H4 Manuale utente

Kramer

Kramer FC-69 Manuale utente

Kramer

Kramer ACC3-12-SP Manuale utente

Kramer

Kramer VM-4DH Manuale utente

Kramer

Kramer VP-439 Manuale utente

Kramer

Kramer VP-437N Manuale utente

Kramer

Kramer VP-510 Manuale utente

Kramer

Kramer VP1 Manuale utente

Kramer

Kramer VP-435 Manuale utente

Kramer

Kramer DigiTOOLS VM-2HDMI Manuale utente

Kramer

Kramer FC-7402 Manuale utente

Kramer

Kramer VP-506 Manuale utente

Kramer

Kramer VP-427H2 Manuale utente

Kramer

Kramer VM-80VN Manuale utente

Kramer

Kramer VA-1VGA Manuale utente

Kramer

Kramer VS-21DT Manuale utente

Kramer

Kramer VM-24H Manuale utente

Kramer

Kramer 401C Manuale utente

Kramer

Kramer DigiTOOLS 7408 Manuale utente

Kramer

Kramer FC-42 Manuale utente

Kramer

Kramer VP-791 Manuale utente

Kramer

Kramer VP-501x1 Manuale utente

Kramer

Kramer FC-101Net Manuale utente

Kramer

Kramer VW-16 Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente