Kramer PT-571 Manuale utente

KRAMER ELECTRONICS LTD.

USER MANUAL

MODELS:

PT-571

HDMI Line Transmitter

PT-572+

HDMI Line Receiver

P/N: 2900-000690 Rev 8

PT-571/PT-572+ – Contents

Contents

1Introduction 1

2Getting Started 2

2.1 Achieving the Best Performance 2

2.2 Safety Instructions 2

2.3 Recycling Kramer Products 3

3Overview 4

3.1 Using Twisted Pair Cable 5

3.2 About the Power Connect™ Feature 5

4Defining the PT-571 HDMI Line Transmitter 6

5Defining the PT-572+ HDMI Line Receiver 7

6Connecting the PT-571 and PT-572+ Transmitter Receiver Pair 8

6.1 Wiring the TP Line In/Line Out RJ-45 Connectors 9

7Technical Specifications 10

Figures

Figure 1: PT-571 HDMI Line Transmitter 6

Figure 2: PT-572+ HDMI Line Receiver 7

Figure 3: Connecting the PT-571/PT-572+ Transmitter/Receiver Pair 8

Figure 4: TP Pinout Wiring 9

PT-571/PT-572+ - Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast range of

problems that confront video, audio, presentation, and broadcasting professionals

on a daily basis. In recent years, we have redesigned and upgraded most of our

line, making the best even better!

Our 1,000-plus different models now appear in 11 groups that are clearly defined

by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;

GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP

5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP

7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:

Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:

Sierra Video Products.

Congratulations on purchasing your Kramer PT-571 and PT-572+

transmitter/receiver pair, which is ideal for the following typical applications:

Boardrooms, conference rooms and training rooms

Presentation systems

Signal distribution and home theater

You must use Shielded Twisted Pair (STP) cabling with the

PT-571 and PT-572+.

Use only a straight pin-to-pin cable with RJ-45 connectors that meet

the EIA /TIA 568B standard. Failure to do so may result in damage

to the device(s).

PT-571/PT-572+ - Getting Started

2 Getting Started

We recommend that you:

Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

Review the contents of this user manual

Go to http://www.kramerelectronics.com/support/product_downloads.asp

to check for up-to-date user manuals, application programs, and to check if

firmware upgrades are available (where appropriate).

2.1 Achieving the Best Performance

To achieve the best performance:

Use only good quality connection cables (we recommend Kramer high-

performance, high-resolution cables) to avoid interference, deterioration in

signal quality due to poor matching, and elevated noise levels (often

associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that may adversely

influence signal quality

Position your Kramer PT-571 away from moisture, excessive sunlight and

dust

This equipment is to be used only inside a building. It may only be

connected to other equipment that is installed inside a building.

2.2 Safety Instructions

Caution:

There are no operator serviceable parts inside the unit

Warning:

Use only the Kramer Electronics input power wall

adapter that is provided with the unit

Warning:

Disconnect the power and unplug the unit from the wall

before installing

PT-571/PT-572+ - Getting Started

2.3 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC

aims to reduce the amount of WEEE sent for disposal to landfill or incineration by

requiring it to be collected and recycled. To comply with the WEEE Directive,

Kramer Electronics has made arrangements with the European Advanced

Recycling Network (EARN) and will cover any costs of treatment, recycling and

recovery of waste Kramer Electronics branded equipment on arrival at the EARN

facility. For details of Kramer’s recycling arrangements in your particular country

go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.

PT-571/PT-572+ - Overview

3 Overview

The PT-571 is a DGKat™ twisted pair transmitter for HDMI signals. The PT-571

converts an HDMI signal to a single twisted pair signal and the PT-572+ converts

the twisted pair signal back to an HDMI signal.

The HDMI Line Transmitter/Receiver system features:

Maximum data rate 4.95Gbps (1.65Gbps per graphic channel)

HDTV compatibility

HDCP compliance

HDMI support

EDID PassThru that passes EDID signals between the source and display

3D pass-through

System Range –Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on

shielded BC-DGKat524 cable; 90m (295ft) at 1080i, or up to 70m (230ft) at

1080p on shielded BC-DGKat623 cable; 100m (330ft) at 1080i or up to 90m

(295ft) at 1080p on shielded BC-DGKat7a23 cable

Note that the transmission range depends on the signal resolution, graphics card and

display used. The distance using non-Kramer CAT 5, CAT 6 and CAT 7a cables may not

reach these ranges

DGKat™ Signal Integration – Kramer’s unique technology for converting

TMDS as well as control and communication to signals that run over twisted

pair cables

Power Connect™ that feeds 12V DC over the CAT 5 cable from transmitter

to receiver (see Section 3.2)

Ultra-Compact PicoTOOLS™ – 4 units can be rack mounted side−by−side

in a 1U rack space with the optional RK−4PT rack adapter.

Use only shielded cable where both ends of the shield are soldered

to ground to eliminate ESD interface.

PT-571/PT-572+ - Overview

3.1 Using Twisted Pair Cable

Kramer engineers have developed special twisted pair cables to best match our

digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the

Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23

(CAT 7a 23 AWG cable). These specially built cables significantly outperform

regular CAT 5/CAT 6/CAT 7a cables.

3.2 About the Power Connect™ Feature

The Power Connect™ feature here means that only one unit in a system, the

transmitter or receiver, needs to be connected to a power source when the

devices are within 60m (197ft) of each other. The Power Connect™ feature

applies as long as the cable can carry power and the distance does not exceed

60m on standard TP cable. (Heavier gauge cable may be used to extend the

Power Connect™ range).

PT-571/PT-572+ - Defining the PT-571 HDMI Line Transmitter

4 Defining the PT-571 HDMI Line Transmitter

The Kramer PicoTOOLS PT-571 HDMI Line Transmitter receives an HDMI signal,

encodes it, and transmits it over a CAT 5 cable to the PT-572+.

The PT-571 has:

An HDMI input connector

An RJ-45 CAT 5 output connector

One power/status LED

Figure 1: PT-571 HDMI Line Transmitter

Feature

Function

12V DC

+12V DC connector for powering the unit

HDMIINConnector

Connect to the HDMI source

ON LED

Lights to indicate the following:

Red—only the power is connected

Orange—either the input or the output is connected

Green—both the input and the output are connected

If no input is connected the unit invokes the power save mode

automatically turning off the power

OUT RJ-45 Connector

Connect to the IN RJ-45 connector on the PT-572+

PT-571/PT-572+ - Defining the PT-572+ HDMI Line Receiver

5 Defining the PT-572+ HDMI Line Receiver

The Kramer Pico TOOLS PT-572+ HDMI Line Receiver receives an encoded

signal over a CAT 5 cable transmitted from the PT-571, decodes it, and converts it

to an HDMI output.

The PT-572+ has:

An HDMI output connector

An RJ-45 CAT 5 input connector

One power/status LED

Figure 2: PT-572+ HDMI Line Receiver

Feature

Function

12V DC

+12V DC connector for powering the unit

HDMIOUTConnector

Connect to the HDMI acceptor

ON LED

Lights to indicate the following:

Red—only the power is connected

Orange—either the input or the output is connected

Green—both the input and the output are connected

IN RJ-45 Connector

Connect to the OUT RJ-45 connector on the PT-571

Altri manuali per PT-571

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kramer Ricevitore

Kramer

Kramer TOOLS TP-45 Manuale utente

Kramer

Kramer WP-120 Manuale utente

Kramer

Kramer 616R Manuale utente

Kramer

Kramer 613T Manuale utente

Kramer

Kramer KIT-400 Manuale utente

Kramer

Kramer TP-873xr Manuale utente

Kramer

Kramer TP-133 Manuale utente

Kramer

Kramer PT-110xl Manuale utente

Kramer

Kramer KIT-400 Manuale utente

Kramer

Kramer 673T Manuale utente

Kramer

Kramer PT-571 Manuale utente

Kramer

Kramer DigiTOOLS TP-552 Manuale utente

Kramer

Kramer 675R/T Manuale utente

Kramer

Kramer PT-110-od Manuale utente

Kramer

Kramer TP-200 Manuale utente

Kramer

Kramer PT-571 Manuale utente

Kramer

Kramer TOOLS TP-9 Manuale utente

Kramer

Kramer TP-122N Manuale utente

Kramer

Kramer WP-580Txr Manuale utente

Kramer

Kramer 631T Manuale utente

Kramer

Kramer TP-752T Manuale utente

Kramer

Kramer 708 Manuale utente

Kramer

Kramer VP-427 Manuale utente

Kramer

Kramer VP-427X1 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente

Dish Network

Dish Network Satellite Television Manuale utente