Kramer VP-734 Manuale utente

KRAMER

VP-734 Quick Start Guide

This guide helps you install and use your product for the first time. For more detailed information, g

http://www.kramerav.com/manual/VP-734 to download the latest manual or scan the QR code on the left.

o to

Step 1: Check what’s in the box

1 Power cord

1 Quick start guide

1 Set of ear racks

4 Rubber feet

The VP-734 Presentation Switcher/ Scaler

IR remote control transmitter with batteries

Step 2: Install the VP-734

To rack mount the machine attach both ear brackets to the machine (by removing the three screws

from each side of the machine and replacing those screws through the ear brackets) or place the

machine on a table.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your .

For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to the VP-734.

VP-734

BlueRay

Disk Player

Laptop Notebook

P/N: Rev:

VP-734 Quick Start (P/N: 2900-300357QS REV 2)

Step 4: Connect the power

Connect AC power to the rear of the VP-734, switch on its power

and then switch on the power on each device.

Connect the AUDIO LINE OUT stereo audio output

Balanced stereo audio

connection

Unbalanced stereo

audio connection

2

Analog Audio

Inputs

Active

Speakers

DVD Player

(CV via breakout cable)

Computer Graphics

Source (VGA) Projector Monitor Speakers Audio Power

Amplifier

PC

Control Device

2 9 0 0 - 3 0 0 3 5 7 QS

Step 6: Operate via the front panel buttons and via the:

Step 5: Set operation parameters via the OSD menu

IR Remote RS-232 and Ethernet Embedded Web Page

Enter the OSD menu via the MENU button on the front panel or the IR remote control

transmitter. Select a menu item and set parameters as required. Sub-menus include:

Input, Picture, Output, PIP, Audio, Setup and Info

WWW.KRAMERAV.COM

If you cannot see any images, verify that the display, TV, or projector is in good

working order, is connected to the VP-734, and that the VP-734 is selected as its

source. If you still don't see an image, press and hold the RESET TO XGA/720P

button for 5 seconds to reset the output to XGA or 720p resolution.

LR-16

POWER

UNIV 1

HDMI 4

HDMI 1

HDMI 3

DP

VOL

HDMI 2

UNIV 2

Freeze

Auto Image Save Recall

MENU

Reset Info

Blank

Mute

RS-232

Baud Rate: 115,200

Data Bits: 8

Stop Bits: 1

Parity: None

Command Format: ASCII

Example (switch input to UNIV2): Y 0 92 1<CR>

Ethernet

To reset the IP settings to the factory reset values go to : Menu->Setup -> Factory RESET->Change the

option to YES and press Enter

IP Address: 192.168.1.39

Subnet mask: 255.255.255.0

Default gateway: 192.168.1.254

TCP Port #: 80

Maximum TCP Ports: 4

Full Factory Reset

OSD Go to : Menu-> FACTORY DEFAULT -> press Enter to Confirm

Front panel buttons Press the Button while plugging the power to reset the

Reset to XGA/720p

machine

Altri manuali per VP-734

3

Altri manuali Kramer Interruttore

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente