KVMSwitchTech MTX-12P-UNV Manuale utente
MTX-12P-UNV
HD/SD Digital Multi-Format Live Video Production Switcher
INSTRUCTION MANUAL
118 W. Streetsboro Street, Ste. 125 | Hudson, OH 44236 | Toll Free: (866) 865-7737 V.1.1
SAFETY INFORMATION
1. To ensure the best results from this product, please read this manual and all other documentation before operating your equipment.
Retain all documentation for future reference.
2. Follow all instructions printed on unit chassis for proper operation.
3. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid.
4. Make sure power outlets conform to the power requirements listed on the back of the unit. Keep unit protected from rain, water and
excessive moisture.
5. Do not attempt to clean the unit with chemical solvents or aerosol cleaners, as this may damage the unit. Dust with a clean dry cloth.
6. Do not use the unit if the electrical power cord is frayed or broken. The power supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, convenience
receptacles, and the point where they exit from the appliance.
7. Do not force switched or external connections in any way. They should all connect easily, without needing to be forced.
8. Always operate the unit with the AC ground wire connected to the electrical system ground. Precautions should be taken so that the
means of grounding of a piece of equipment is not defeated.
9. AC voltage must be correct and the same as that printed on the rear of the unit. Damage caused by connection to improper AC
voltage is not covered by any warranty.
10. Turn power off and disconnect unit from AC current before making connections.
11. Never hold a power switch in the “ON” position.
12. This unit should be installed in a cool dry place, away from sources of excessive heat, vibration, dust, moisture and cold. Do not use
the unit near stoves, heat registers, radiators, or other heat producing devices.
13. Do not block fan intake or exhaust ports. Do not operate equipment on a surface or in an environment which may impede the normal
flow of air around the unit, such as a bed, rug, carpet, or completely enclosed rack. If the unit is used in an extremely dusty or smoky
environment, the unit should be periodically “blown free” of foreign dust and matter.
14. To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Refer all servicing to
qualified service personnel. There are no user serviceable parts inside.
15. When moving the unit, disconnect input ports first, then remove the power cable; finally, disconnect the interconnecting cables to
other devices.
16. Do not drive the inputs with a signal level greater than that required to drive equipment to full output.
17. The equipment power cord should be unplugged from the outlet when left unused for a long period of time.
18. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship the unit,
use only the original factory packing.
19. Service Information Equipment should be serviced by qualifier service personnel when:
A. The power supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the equipment.
C. The equipment has been exposed to rain
D. The equipment does not appear to operate normally, or exhibits a marked change in performance
E. The equipment has been dropped, or the enclosure damaged.
THIS SAFETY INFORMATION IS OF A GENERAL NATURE AND MAY BE SUPERSEDED BY INSTRUCTIONS CONTAINED WITHIN THIS MANUAL
TABLE OF CONTENTS
INTRODUCTION
This High Definition HD/SD digital A/V Mixer has two (2) input BUSES, each with six
(6) inputs (2 x HDMI’s, 2 x Component and 2 x S-Video/Composite video) and also
a Background Color feature for greater efficiency. The device has 1 x HDMI, 2 x
Components / 2 x S-Video or 2 x Composite video output ports and also allows you to
make adjustments to the position of your video. The compatible output resolutions are
HD/SD, NTSC, NTSC-4.43, PAL, PAL-M, PAN-N, SECAM, 480i, 576i, 480p, 576p, 720p
50/60 and 1080i 50/60. The output resolutions can also be automatically adjusted so it
is more consistent. Please refer to the diagram on the right for additional information.
PACKAGE CONTENTS
MTX-12P-UNV SD/HD Video and Audio Mixer 1× Component (YPbPr) Cable
1x HDMI Cable 1× Metal Joystick
1x S-Video Cable Users Guide
1x Stereo Audio and Composite Video Cable 12 V/5.0 A DC power adaptor
1× Stereo Audio to 3.5 mm Jack cable
CONTENTS
Introduction & Contents ........................................................1
Features ................................................................................2
Specifications........................................................................3
Connector and Installation ..................................................4
Front Panel Connection .................................................4
Rear Panel Connections ................................................4
Output Resolutions .........................................................4
Operation Controls and Functions ........................................ 2
Position/Time ..................................................................5
Wipe Modes ....................................................................6
Digital Effects .................................................................7
Mode Control ..................................................................8
Adjust .............................................................................9
Video Source Select .....................................................10
Audio/VideoMixer..........................................................11
Audio Level ...................................................................12
Rear Panel ...................................................................13
Operation.............................................................................14
Basic Operation ...........................................................14
Input Signal Selection and Background color Selection ..14
Video Mix .....................................................................14
Video Wipe ...................................................................15
WIPE PATTERN Selection .........................................15
Multiple Pattern Selection ..........................................17
ONE-WAY WIPE ..........................................................17
REVERSE WIPE .........................................................17
Picture-In-Picture ..........................................................18
KEY...............................................................................19
AUTO FADE/WIPE Selection .....................................20
DIGITAL EFFECT .........................................................20
AUDIO MIXER .............................................................20
OSD ADJUST .............................................................21
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update
or to keep current the information contained in this document.
We reserve the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part
translated into any language or computer file, in any form or by
any means—electronic, mechanical, magnetic, optical, chemical,
manual, or otherwise—without express written permission and
consent
© Copyright 2012. All Rights Reserved.
Version 1.1 APRIL 2013
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.
1
FEATURES
FEATURES
• Selective size and position for digital effects area and PIP windows.
• Automatic fade and wipe with speed preset control.
• Digital effects- Still,Mosaic,Paint and Negative.
• 96 wipe patterns.
• Chroma key & Luminance key.
• High Picture Quality.
• 3x8 background color.
• Joystick control for digital effect position.
• Fade control for Video and Audio.
• Video and Audio mixing.
• 2x HDMI source inputs.
• 2x Component (YPbPr) source inputs.
• 2x Composite / S-Video source inputs.
• 1x HDMI recording output.
• 2x Component (YPbPr) recording outputs.
• 1x Composite and S-Video recording outputs.
• 1x Composite and S-Video preview outputs with On-screen Display.
• Auxiliary audio input.
• Microphone input and headphone output.
• Picture in Picture control (3 window sizes).
• Each A/B BUS can adjust the Contrast/Brightness/Color/Hue/Detail and Aspect Ratio.
• Supports Lip-Sync delay up to 170 ms.
• Composite supports 3D comb filter and YC separation.
• Motion and Edge Adaptive De-interlacing.
Note: When the selected source input is not connected or has HDCP protection, only a blue screen will be displayed.
2
SPECIFICATIONS
SPECIFICATIONS
SOURCE INPUT: 6 (SOURCE 1/6)
• HDMI Input: 2x Digital Video YUV (480i/p, 576i/p, 720p50/60, 1080i50/60, 1080p50/60)
• Component Input: 2x Analog Video YUV (480i/p, 576i/p, 720p50/60, 1080i50/60)
• Y/C Input: 2x
• Y Signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
• C Signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
• Video Input: 2x 1.0 Vp-p 75Ωcomposite signal, Pin-Jack (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM)
• Audio Input: 4x −6 dBs/20 kΩPin Jack (L/R)
EXTERNAL SOUND INPUT
• MIC Input: 1x (MIC); −60 dBv/600Ω
• AUX Input: 1x (AUX); −6 dBs/20 kΩ, Pin Jacks (L/R)
RECORDING OUTPUT
• HDMI Output: 1x Digital Video YUV (480i/p, 576i/p, 720p50/60, 1080i50/60)
• Component Output: 2x Analog Video YUV (480i/p, 576i/p, 720p50/60, 1080i50/60)
• Y/C Output: 1x
• Y Signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
• C Signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
• Video Output: 1x 1.0 Vp-p 75Ωcomposite signal, Pin-Jack (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM)
• Audio Output: 2x −6 dBs/20 kΩPin Jack (L/R)
PREVIEW OUTPUT (OSD)
• Y/C Output: 1x
• Y Signal: 1.0 Vp-p 75Ω, Mini Din 4-pin connector
• C Signal: 0.3 Vp-p 75Ω, Mini Din 4-pin connector
• Video Output: 1x 1.0 Vp-p 75Ωcomposite signal, Pin-Jack (NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM)
HEADPHONE OUTPUT
• Headphone: 1x; −20 dBv~ −80 dBv, 8Ωunbalanced, phone-5 jack
EFFECTS
• Video: Still, Mosaic, Paint, Negative, Wipe, Mix, Fade, Picture-In-Picture, Chroma key, Luminance key
Background color: 8x (White, Yellow, Cyan, Green, Magenta, Red, Blue, Black)
WIPE PATTERNS: 96 patterns
S/N (TYPICAL): Video: 48 dB (composite), 50 dB (HDMI, Component,Y/C) Audio: 60 dB
POWER SOURCE:12 V DC 3 A
POWER CONSUMPTION: Approx. 15 W
DIMENSIONS (WxDxH): 10.5 x 14.6 x 4 in (267× 370 × 103.5mm)
WEIGHT: 4.4 lbs / 2 Kgs
SYSTEM REQUIREMENTS
• HDMI (Non-HDCP), HD (YPbPr) or SD (Composite or S-Video) Source
• HDMI (Non-HDCP), HD (YPbPr) or SD (Composite or S-Video) Recording Device
• HDMI (Non-HDCP), HD (YPbPr) or SD (Composite or S-Video) Monitor or display
3
HARDWARE DESCRIPTION
FRONT PANEL
PHONES: Connect ear phone to listen the audio signal.
MIC: Connect the MIC to insert audio.
REAR PANEL
Source 3 HD stereo audio input 1.
Source 4 HD stereo audio input 2.
Source 5 SD stereo audio input 1.
Source 6 SD stereo audio input 2.
Auxiliary Audio input Jack.
Program audio out 1 Audio output Jack.
Program audio out 2 Audio output Jack.
Power ON/OFF Switch.
Source 1 HDMI input 1.
Source 2 HDMI input 2.
Source 3 HD Component Video input 1.
Source 4 HD Component Video input 2.
Source 5 SD Composite Video or YC input 1.
Source 6 SD Composite Video or YC input 2.
HDMI program video output.
Program out 1 HD YPBPR Video output jack.
Program out 2 HD YPBPR Video output jack.
SD PREVIEW out(OSD) Video and YC output jack.
SD Recording out Video and YC output jack.
DC INPUT 12V 3A.
4
CONNECTOR AND INSTALLATION
REAR PANEL CONNECTIONS
OUTPUT RESOLUTIONS
The output can select HD or SD system. Users can use SD PREVIEW to adjust the output system resolution, or a short cut is to press
two keys for 1 second simultaneously.
The combinations below:
button + button = 480p60
button + button = 576p60
button + button = 720p50
button + button = 720p60
button + button = 1080i50
button + button = 1080i60
button + button = NTSC
button + button = NTSC 43
button + button = PAL
button + button = PAL M
button + button = PAL N
button + button = SECAM50
5
OPERATION CONTROLS AND FUNCTIONS
POSITION/TIME
Time Control
For adjusting the transition time of the Auto Fade and the Auto Wipe functions.
Joystick Control
This joystick control has two functions; control the position of the square wipe pattern and P-IN-P picture.
FUNCTIONS
One-way wipe button
Reverse wipe button
Multiple wipe button
Straight wipe button
Split wipe button
Corner wipe button
Diagonal wipe button
Triangle wipe button
Square wipe button
6
7
OPERATION CONTROLS AND FUNCTIONS
MODE CONTROL
Wipe button
For selecting the wipe effect.
PIP button
Picture in picture mode can be selected by pressing this button.
Mix(Fade) button
Press this button to select the fade In/Out mode.
KEY button
This button allows you to tune in a best performance point for the blue key and luma key effects.
EDGE button
Used to select sharp edge / soft edge or color edge.
COLOR button
Used to select eight different frame colors.
8
OPERATION CONTROLS AND FUNCTIONS
DIGITAL EFFECTS
A-bus digital effect ON button.
A-bus Still button and OSD left adjust.
A-bus Paint button and OSD right adjust.
A-bus Negative button and OSD up adjust.
A-bus Mosaic button and OSD down adjust.
B-bus digital effect ON button.
B-bus Still button.
B-bus Paint button.
B-bus Negative button.
B-bus Mosaic button.
ADJUST
Adjust button
When LED switched off, the SDP review output side will show AB-bus / output source and output format. When LED illuminate, the user
can press / / and buttons to adjust the values.
DEMO button
When LED illuminate, the auto DEMO will switch to ON and the system will auto sequence Demo 96 wipe patterns, press the TIME
button to adjust the auto sequence.
SCAN button
Press and hold SCAN button for 3 seconds, the system will enter into SCAN function and will SCAN the input ports from 1 to 6 and record
each port’s format to the system.
Indice
Altri manuali KVMSwitchTech Interruttore
KVMSwitchTech
KVMSwitchTech HDMI-PIP-4P-MINI Manuale utente
KVMSwitchTech
KVMSwitchTech HDMI-PIP-4P Manuale utente
KVMSwitchTech
KVMSwitchTech KVMSWR-2X16IP Manuale utente
KVMSwitchTech
KVMSwitchTech KVML-4 Manuale utente
KVMSwitchTech
KVMSwitchTech MTX-CAT6-IP-3X16 Manuale utente
KVMSwitchTech
KVMSwitchTech HDSWTH3D-4 Manuale
