Labconco Protector Echo 180 Series Manuale utente

Original instructions

Protector®Echo™ &

Protector®Airo™

Filtered Fume Hoods

Models

180 Series –4', 5', 6' and 8' (Echo)

181 Series –4', 5', 6' and 8' with side glass (Echo)

182 Series –4', 5', 6' and 8' with 360 degree visibility (Echo)

183 Series –4', 5', 6' and 8' Floor-Mount only (Echo)

184 Series –3' and 4' small height models only (Airo)

Original instructions

the right to make periodic design changes without obligation to notify any person or entity of such change.

Returned or Damaged Goods

Do not return goods without the prior authorization from Labconco. Unauthorized returns will not be

accepted. If your shipment was damaged in transit, you must file a claim directly with the freight carrier.

Labconco Corporation and its dealers are not responsible for shipping damages.

The United States Interstate Commerce Commission rules require that claims be filed with the delivery

carrier within fifteen (15) days of delivery.

Limitation of Liability

The disposal and/or emission of substances used in connection with this equipment may be governed by

various federal, state, or local regulations. All users of this equipment are required to become familiar with

any regulations that apply in the user’s area concerning the dumping of waste materials in or upon water,

land, or air and to comply with such regulations. Labconco Corporation is held harmless with respect to

user’s compliance with such regulations.

Contacting Labconco Corporation

If you have questions that are not addressed in this manual, or if you need technical assistance, contact

Labconco’s Customer Service Department or Labconco’s Product Service Department at 1-800-821-5525

or 1-816-333-8811, between the hours of 7:30 a.m. and 5:30 p.m., Central Standard Time.

Part #9411500, Rev. F

ECO L352

Warranty

Labconco Corporation provides a warranty to the original buyer for the repair or replacement of parts and

reasonable labor as a result of normal and proper use of the equipment with compatible chemicals. Broken

glassware and maintenance items, such as filters, gaskets, light bulbs, finishes and lubrication are not

warranted. Excluded from warranty are products with improper installation, erratic electrical or utility supply,

unauthorized repair and products used with incompatible chemicals.

The warranty for Protector®Echo™ & Protector®Airo™ Filtered Fume Hoods will expire one year from date

of installation or two years from date of shipment from Labconco, whichever is sooner. Warranty is non-

transferable and only applies to the owner (organization) of record.

Buyer is exclusively responsible for the set-up, installation, verification, decontamination or calibration of

equipment. This limited warranty covers parts and labor, but not transportation and insurance charges. If the

failure is determined to be covered under this warranty, the dealer or Labconco Corporation will authorize

repair or replacement of all defective parts to restore the unit to operation. Repairs may be completed by 3rd

party service agents approved by Labconco Corporation. Labconco Corporation reserves the rights to limit this

warranty based on a service agent’s travel, working hours, the site’s entry restrictions and unobstructed access

to serviceable components of the product.

Under no circumstances shall Labconco Corporation be liable for indirect, consequential, or special damages

of any kind. This warranty is exclusive and in lieu of all other warranties whether oral, or implied.

Original instructions

TABLE OF CONTENTS

CHAPTER 1: INTRODUCTION 1

Model Number Configurator 2

About This Manual 3

Typographical Conventions 4

Your Next Step 5

CHAPTER 2: PREREQUISITES 6

Location Requirements 7

Support Requirements 7

Filtration Technology Airflow and Power Requirements 7

Electrical Requirements 8

Service Line Requirements 8

Space Requirements 8

Commissioning, Setup and Startup Requirements 8

CHAPTER 3: GETTING STARTED 9

Unpacking Your Fume Hood 10

Removing the Shipping Skid 10

Sash Weight Release 11

Installing the Hood on a Supporting Structure and Work Surface 11

Connecting the Electrical Supply Source to the Protector Hood 13

Connecting the Service Lines to the Protector Hood 15

Sealing the Protector Hood to the Work Surface 16

Setting up the Protector Echo Floor-Mounted Filtered Hood 16

Commissioning the Filtration Technology 17

Re-Configuration Process 27

Troubleshooting Guide for GFH 43

Certifying the Protector Filtered Fume Hood 46

CHAPTER 4: PERFORMANCE FEATURES AND SAFETY

PRECAUTIONS 47

Performance Features 47

Safety Precautions 51

Original instructions

CHAPTER 5: USING THE PROTECTOR FILTERED HOOD 59

Access Cards 59

Starting the Filtered Hood 60

Operating the Vertical-Rising Sash 60

The Modular Neutrodine Filtration 60

Detecting a Breakthrough 61

Communication 63

User Options and Approved Chemicals 64

Working in Your Protector Filtered Fume Hood 64

CHAPTER 6: MAINTAINING THE PROTECTOR

FILTERED HOOD 66

Routine Maintenance Schedule 66

Initial Certification 67

Re-Certification 67

User Alarm Code List 67

Tool List 70

Neutrodine SDS for Disposal 71

Partial Filter Replacement Procedure 73

Reconfiguration Process 87

Light and/or Circuit Board Replacement 88

Fan and/or Circuit Board Replacement 90

Fan Box Replacement 92

Electro (Acid) Sensor Replacement 95

Secure Mode 103

gGuard Checklist and Software Option 104

BACnet Checklist Option 104

CHAPTER 7: ACCESSORIZING THE PROTECTOR

FILTERED HOOD 105

Filters 105

Work Surfaces 106

Base Stands, Accessory Shelves, Seismic Supports, and

Hydraulic Lift Base Stands 107

Storage Cabinets 108

Installing Additional Service Fixtures 108

Installing an Electrical Duplex Outlet 110

Installing Optional Guardian™ Digital Airflow Monitor 111

Sash Stop Kit –Field Installation 111

Distillation Grids –Field Installation 112

Installing Remote Monitoring Software 112

Installing BACnet Gateway Hardware 113

ADA Remote Control 113

Additional User, Maintenance, and Administrator Access Cards 113

Sash Reduction Wing Kits 114

CHAPTER 8: TROUBLESHOOTING 115

Original instructions

APPENDIX A: PROTECTOR FILTERED HOOD

REPLACMENT COMPONENTS 118

Protector Echo Filtered Hood Replacement Parts 118

Neutrodine Filtration Technology Replacement Parts 119

APPENDIX B: PROTECTOR FILTERED HOOD DIMENSIONS 122

APPENDIX C: PROTECTOR FILTERED HOOD

SPECIFICATIONS 125

APPENDIX D: SERIAL NUMBER TAG DESCRIPTION 127

APPENDIX E: gGUARD 133

APPENDIX F: BACnet 148

APPENDIX G: SECURE MODE 151

APPENDIX H: CHEMICAL GUIDE 155

APPENDIX I: REFERENCES 171

APPENDIX J: SETTING UP THE PROTECTOR ECHO

FLOOR-MOUNTED FILTERED HOOD 173

APPENDIX K: SMALL 54.2" HEIGHT AIRO DIMENSIONS 185

Product Service 1-800-522-7658

Original instructions

CHAPTER 1

INTRODUCTION

Congratulations on your purchase of a Labconco Protector®Echo™or Protector®

Airo™ Filtered Fume Hood which is unique as it is built on a traditional fume

hood platform along with Neutrodine®Filters that handle solvents, acids, and bases

with one comprehensive filter. From here on in this manual, the Protector Airo

only refers to the shorter height 3' and 4' widths with 54.2" exterior height. It

offers a comfortable workspace for users accustomed to the space and utility of a

standard ducted fume hood, but in the realm of a filtered fume hood. The Protector

Filtered Fume Hood solves the problem of ducting in laboratories that are difficult

to vent because of location. The Protector Filtered Fume Hood combines its

patented (U.S. Patent No. 6,461,233) fully featured, containment-enhancing fume

hood design with Neutrodine (by Erlab) filtration technology to deliver a multi-use

ductless fume hood. The Protector Filtered Fume Hood meets the definition of

SEFA 9 DH3 ductless hoods because of its sensor package, backup filters, and

communication. Building communication is one of the most important aspects of

the Protector Filtered Fume Hood. In the event of loss of airflow, damage of a

primary filter, or if a leak reaches the second set of redundant filters for any

reason, an alarm will sound and the communication system will alert a designated

email address. The designated safety officer could be made aware of the problem

immediately through any internet-enabled smart phone, tablet or computer. Large

laboratories and labs where a single safety manager must handle multiple concerns

will benefit most from this proactive safety system.

The Labconco Protector Filtered Fume Hood has been engineered to provide

maximum visibility in a laboratory, and effectively contain toxic, noxious, or other

harmful materials when properly installed. The Protector Filtered Fume Hood

offers many unique features to enhance safety, performance, and visibility. To

take full advantage of them, please acquaint yourself with this manual and keep it

handy for future reference. If you are unfamiliar with how fume hoods operate,

please review Chapter 4: Performance Features and Safety Precautions before

you begin working in the fume hood. Even if you are an experienced fume hood

user, please review Chapter 5: Using Your Protector Filtered Hood, which

describes your filtered hood’s features so that you can efficiently use the hood.

Chapter 1: Introduction

Product Service 1-800-522-7658

Original instructions

Model Number Configurator

Example:

Product Line Family Configuration Width Depth Airfoil Sash System Electrical Accessories

Fume Hood 1 Filtered Hood 8 BTNone 0 4' 4 37.7" BT& FM 1 Eco-Foil 0 Cable 0 115V 0 None 0

BTSides 1 5' 5 43.7" FM 2 Flush (Special) 4 Chain BT only 1 230V 2 2 Fixtures 1

BT360 2 6' 6 55.7" FM 3 None-FMonly 7 (Special) 2 Fix& 1 GFCI 2

FM None 3 8' 8 (8'-2 GFCI)

Airo/BTSmall 4 3' 3

31.7" BT, 0

Height small 3' only

Airo

BT= Benchtop

FM= Floor Mount

Figure 1-1

Chapter 1: Introduction

Product Service 1-800-522-7658

Original instructions

About This Manual

This manual is designed to help you learn how to install, use, and maintain your

filtered fume hood. Instructions for installing optional equipment on your hood are

also included.

Chapter 1: Introduction provides a brief overview of the filtered fume hood,

explains the organization of the manual, and defines the typographical conventions

used in the manual.

Chapter 2: Prerequisites explains what you need to do to prepare your site before

you install your filtered fume hood. Electrical and service requirements are

discussed.

Chapter 3: Getting Started contains the information you need to properly unpack,

inspect, install, and certify your filtered fume hood.

Chapter 4: Performance Features and Safety Precautions explains how the

Protector Filtered Hood operates and the appropriate precautions you should take

when using the fume hood.

Chapter 5: Using Your Protector Filtered Hood discusses the basic operation of

your filtered fume hood. Information on how to prepare, use and shut down your

Protector Filtered Hood are included.

Chapter 6: Maintaining Your Protector Filtered Hood explains how to perform

routine maintenance on your filtered fume hood.

Chapter 7: Modifying Your Protector Filtered Hood explains how to modify the

filtered fume hood or add accessories.

Chapter 8: Troubleshooting contains a table of problems you may encounter while

using your filtered fume hood including the probable causes of the problems and

suggested corrective actions.

Appendix A: Protector Filtered Hood Components contains labeled diagrams of all

of the components of the filtered fume hoods.

Appendix B: Protector Filtered Hood Dimensions contains comprehensive

diagrams showing all of the dimensions for the filtered fume hoods.

Appendix C: Protector Filtered Hood Specifications contains the electrical

requirements for the filtered fume hood. Wiring diagrams are also included.

Appendix D: Serial Number Tag Description provides current rating code used on

serial number tag.

Chapter 1: Introduction

Product Service 1-800-522-7658

Original instructions

Appendix E: gGuard

Appendix F: BACnet

Appendix G: Secure Mode

Appendix H: Chemical Guide

Appendix I: References lists the various resources available that deal with filtered

fume hoods.

Typographical Conventions

Recognizing the following typographical conventions will help you understand and

use this manual:

Book, chapter, and section titles are shown in italic type (e.g., Chapter 3:

Getting Started).

Steps required to perform a task are presented in a numbered format.

Comments located in the margins provide suggestions, reminders, and

references.

Critical information is presented in boldface type in paragraphs that are

preceded by the exclamation icon. Failure to comply with the information

following an exclamation icon may result in injury to the user or permanent

damage to fume hood.

Les informations critiques sont présentées en gras dans les paragraphes qui

sont précédés par l'icône d'exclamation. Ne pas se conformer aux informations

qui suivent une icône d'exclamation peut résulter à la blessure de l'utilisateur

ou à des dommages irréversibles de la hotte aspirante.

Critical information is presented in boldface type in paragraphs that are

preceded by the wrench icon. These operations should only be performed by a

trained certifier or contractor. Failure to comply with the information

following a wrench icon may result in injury to the user or permanent damage

to your hood.

Les informations critiques sont présentées en gras dans les paragraphes qui

sont précédés par l'icône de clé plate. Ces opérations devraient être seulement

exécutées par un professionnel agrée. L'échec pour se conformer aux

informations qui suivent une icône de clé plate peut résulter à la blessure de

l'utilisateur ou à des dommages irréversibles de la hotte.

Important information is presented in capitalized type in paragraphs that are

preceded by the pointer icon. It is imperative that the information contained in

these paragraphs be thoroughly read and understood by the user.



Chapter 1: Introduction

Product Service 1-800-522-7658

Original instructions

CAUTION –See Manual. When this symbol is on a fume hood it indicates a

caution that is detailed in this manual.

PRUDENCE –Consulter le Manuel. Quand ce symbole est sur une hotte

aspirante, il indique une prudence qui est détaillée dans ce manuel.

CAUTION –Hot Surface

AVERTIR –Surface Chaude

CAUTION –See Manual. This symbol on the fume hood indicates the

possibility of a pinch hazard.

PRUDENCE –Consulter le Manuel. Ce symbole sur la hotte indique la

possibilité d'un risque de pincement.

Your Next Step

If your Filtered Fume Hood needs to be installed, proceed to Chapter 2:

Prerequisites to ensure your installation site meets all of the requirements. Then,

go to Chapter 3: Getting Started for instructions on how to install your filtered

fume hood and make all of the necessary connections.

If you would like to review how filtered fume hoods operate, go to Chapter 4:

Performance Features and Safety Precautions.

For information on the operational characteristics of your filtered fume hood, go to

Chapter 5: Using Your Protector Filtered Hood.

If your filtered fume hood is installed and you need to perform routine

maintenance on the cabinet, proceed to Chapter 6: Maintaining Your Protector

Filtered Hood.

For information on making modifications to the configuration of your fume hood,

go to Chapter 7: Modifying Your Protector Filtered Hood.

Refer to Chapter 8: Troubleshooting if you are experiencing problems with your

filtered fume hood.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Labconco Attrezzature da laboratorio

Labconco

Labconco RapidStill I Manuale utente

Labconco

Labconco FreeZone 7750000 Manuale utente

Labconco

Labconco Protector 3390000 Manuale utente

Labconco

Labconco Protector XL 1110 Series Manuale utente

Labconco

Labconco Capture BT 31700-00 Manuale utente

Labconco

Labconco Fiberglass 30 Series Manuale utente

Labconco

Labconco Purifier Class 2 Biological Safety Cabinet Manuale utente

Labconco

Labconco Purifier 3951400 Manuale utente

Labconco

Labconco Logic+ A2 Manuale utente

Labconco

Labconco Protector 1204 Series Manuale utente

Labconco

Labconco Protector XStream 11041 Series Manuale utente

Labconco

Labconco Purifier Axiom 30441 Series Manuale utente

Labconco

Labconco Purifier Logic+ 30231 Manuale utente

Labconco

Labconco Protector XStream 9840400 Manuale utente

Labconco

Labconco Capture BT 31700-00 Manuale utente

Labconco

Labconco CentriVap 78110-00 Manuale utente

Labconco

Labconco Axiom C1 Manuale utente

Labconco

Labconco CentriVap 73100 Series Manuale utente

Labconco

Labconco Precise CA 5220100 Manuale utente

Labconco

Labconco CentriVap-105 Cold Trap Manuale di istruzioni

Labconco

Labconco CentriVap 78110 Series Manuale utente

Labconco

Labconco Protector XL 1124 Series Manuale utente

Labconco

Labconco FreeZone 6 Manuale utente

Labconco

Labconco Purifier Logic+ 30348 Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente