Labnet FastPette Pro Manuale utente

This quick guide is intended to provide a brief overview

of the main features and operation of Labnet pipet

controllers. For detailed information, please refer to the

User Manual that can be found at www.labnetlink.com

in several languages.

Labnet FastPette™

Pro and V2

Quick Start Guide

Catalog Numbers:

P2002 (FastPette Pro)

P2000 (FastPette V2)

Intended Use

The pipet controller is a device

intended for general laboratory

use only, for pipetting liquids with

the use of measuring pipets. It

can work with all types of glass or

plastic pipets in the volume range

from 0.5 mL to 100 mL.

Battery Charge

The batteries may be charged only

with the original charger. Using

chargers other than the original

one may damage the battery.

Fastepette™ Pro: 3 NiHM type AAA

are delivered with the product and

need to be installed before the

rst use.

FastPette V2: NiHM battery is

installed in the product.

Use country specic adapter.

Charge the batteries either

on charging stand or directly

connecting the charger to the

socket. Input: 100-240V, 50/60Hz,

0.2A; output: DC 9V.

Charging process is indicated by:

FastPette Pro: successive lighting

of “bars”. Full charging time: 7 to

8 hours. The batteries are charged

when all 3 “bars” are displayed

simultaneously.

FastPette V2: continuous lighting

of the LED indicator, which stops

after the charger is disconnected.

Full charging time: up to 11 hours.

0.5 mL to

100 mL

EU US

UK AU

TOP

FastPette

Pro only

FastPette

Pro only

Speed Setting

FastPette™ Pro: Press the SPEED

button until the display shows

the correct speed – HIGH or LOW.

FastPette V2: Change position of

the SPEED switches.

• HIGH speed - fast aspirating

recommended for pipets <5 mL

• LOW speed - slow aspirating

recommended for pipets >5 mL

and foaming liquids

Manual Speed Control

• Speed can be controlled

manually by pressing the

trigger buttons

Mode Control

FastPette Pro: Press the MODE

button until the display shows

the correct mode – BLOW OUT

(arrow) or GRAV (drop).

FastPette V2: Change position of

the MODE switches.

NOTE: Pump is not working when

in GRAV mode.

Filter Replacement

Safety Notes

WARNING! Risk of injury

CAUTION: Risk of damage to the device or errors in

pipetting of liquids.

Before starting the work with the pipet controller every

user should read these operating instructions carefully.

CAUTION:

• Using the device inconsistently with the operating

instructions may result in damaging the device.

• The device should be serviced only at an authorized

service center, otherwise the manufacturer will be

relieved from any liability under the warranty.

• Only original spare parts and accessories, recommended

by the manufacturer, shall be used.

• Only the original charger, supplied by the manufacturer,

shall be used for charging the batteries.

• In case of incorrect functioning of the pipet controller,

work shall be stopped. The device shall be cleaned and

sent for repair to an authorized service center.

• In the case of mechanical damage to the casing, the

device shall be immediately sent for repair to an

authorized service center.

• The use of excessive force during work shall be avoided.

WARNING!

• During the work with the pipet controller general safety

regulations regarding risks related with laboratory work

should be observed. Protective clothing, goggles, and

gloves should be worn.

• The pipet controller shall not be used for measuring

substances with vapors of which damage the following

plastics: PP, SI, EPDM, POM.

• The pipet controller shall not be used in an environment

where explosion risk is present.

• Flammable liquids shall not be measured – in particular

substances with ash-point below 0°C (ether, acetone).

• The pipet controller shall not be used for drawing acids

with a concentration above 1 mol/L.

• The pipet controller shall not be used for drawing

solutions with a temperature above 50°C.

• The pipet controller may work in temperature range

from +10°C to +35°C.

• In the case of mechanical damage to the casing, the

device shall be immediately sent for repair to an

authorized service center.

Cleaning

• External parts may be cleaned with a swab moistened

with isopropyl alcohol.

• The nose piece and the pipet holder may be autoclaved

at 121°C for 20 minutes.

• The lter included in the set may be sterilized by

autoclaving at 121°C for not more than 15 minutes.

• The outer body of the pipet controller is UV resistant,

the recommended distance from the radiation source

to exposed element should be not less than 50 cm.

Prolonged and very intense UV exposure can cause

de-coloration of pipet controller parts, without affecting

its performance.

Product Disposal

According to Directive 2012/19/EU of the

European Parliament and of the Council of

4 July 2012 on waste electrical and electronic

equipment (WEEE), the HTL Swiftpet Pro Pipet

Controller is marked with the crossed-out

wheeled bin and must not be disposed of

with domestic waste.

Consequently, the buyer shall follow the

instructions for reuse and recycling of waste

electronic and electrical equipment (WEEE)

provided with the products and available at

www.corning.com/weee.

Warranty

The Labnet FastPette™ Pro and FastPette V2 pipet

controllers are covered by a 1 (one) year limited warranty.

For more information on the warranty limitations refer

to full version of the User Manual available at

www.labnetlink.com.

7/21 CLSLN-AN-1008DOC REV1

Made in Poland

For a listing of trademarks, visit www.corning.com/clstrademarks.

All other trademarks are the property of their respective owners.

For additional product or technical information, visit

www.labnetlink.com or contact your local sales ofce.

NORTH AMERICA

t 800.492.1110

t 978.442.2200

ASIA/PACIFIC

Australia/New Zealand

t 61 427286832

Chinese Mainland

t 86 21 3338 4338

f 86 21 3338 4300

India

t 91 124 4604000

f 91 124 4604099

Japan

t 81 3-3586 1996

f 81 3-3586 1291

Korea

t 82 2-796-9500

f 82 2-796-9300

Singapore

t 65 6572-9740

f 65 6735-2913

Taiwan

t 886 2-2716-0338

f 886 2-2516-7500

EUROPE

[email protected]

France

t 0800 916 882

Germany

t 0800 101 1153

The Netherlands

t 020 655 79 28

United Kingdom

t 0800 376 8660

All Other European

Countries

t +31 (0) 206 59 60 51

LATIN AMERICA

[email protected]

Brazil

t 55 (11) 3089-7400

Mexico

t (52-81) 8158-8400

Questo manuale è adatto per i seguenti modelli

Altri manuali Labnet Attrezzature da laboratorio

Labnet

Labnet Orbit S2020-P4-B Manuale utente

Labnet

Labnet Spectrafuge 6C Manuale utente

Labnet

Labnet Prism R Manuale utente

Labnet

Labnet Spectrafuge 24D Manuale utente

Labnet

Labnet BioPette PLUS Manuale utente

Labnet

Labnet Excel P3600L-10 Manuale utente

Labnet

Labnet ESCZ100A Manuale utente

Labnet

Labnet ENDURO VE10 Manuale utente

Labnet

Labnet I-4001-HCS Manuale utente

Labnet

Labnet ENDURO96 E1010-9611 Manuale utente

Labnet

Labnet MultiGene OptiMax Thermal Cycler Manuale utente

Labnet

Labnet 311DS Manuale utente

Labnet

Labnet 25 Manuale utente

Labnet

Labnet AccuPlate D0400 Manuale utente

Labnet

Labnet ProBlot Rocker 25 Manuale utente

Labnet

Labnet D0100 Manuale utente

Labnet

Labnet TC9600-G Manuale utente

Labnet

Labnet C1303-T Manuale utente

Labnet

Labnet BioPette Multichannel Manuale utente

Labnet

Labnet H5500 Manuale utente

Labnet

Labnet Spectrafuge 16M Manuale utente

Labnet

Labnet Excel P3600L-10 Manuale utente

Labnet

Labnet C0226R Manuale utente

Labnet

Labnet 222DS Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente