Land Pride FDR3590 Manuale utente

Cover photo may show optional equipment

not supplied with standard unit.

Read the Operator’s manual entirely. When

you see this symbol, the subsequent

instructions and warnings are serious - follow

without exception. Your life and the lives of

others depend on it!

Table of Contents

15939

FDR3590

Rear Discharge Grooming Mowers

15939

310-229M

Operator’s Manual

12/10/07

Table of Contents

Land Pride

Table of Contents

FDR3590 Rear Discharge Grooming Mowers 310-229M 12/10/07

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land

Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves

the right to revise and improve its products as it sees fit. This publicationdescribes the state of this product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

Important Safety Information . . . . . . . . . . .1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look For The Safety Alert Symbol . . . . . . . . . . . . .1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . .7

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 7

Serial Number Plate . . . . . . . . . . . . . . . . . . . . .7

Further Assistance . . . . . . . . . . . . . . . . . . . . . .7

Section 1: Assembly and Set-up . . . . . . . .8

Tractor Requirements . . . . . . . . . . . . . . . . . . . . . .8

Upper Hitch Arms . . . . . . . . . . . . . . . . . . . . . . . . . 8

Gauge Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . .9

PTO Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Checking Driveline Minimum Length . . . . . . . . . 9

Checking Driveline Maximum Length . . . . . . . 10

Accessory Equipment . . . . . . . . . . . . . . . . . . . . .11

Anti-Scalping Front Roller . . . . . . . . . . . . . . . . . .11

Cutting Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Low Lift Blades . . . . . . . . . . . . . . . . . . . . . . . . 11

Medium Lift Blades . . . . . . . . . . . . . . . . . . . . .11

High Lift Blades . . . . . . . . . . . . . . . . . . . . . . . .11

Mulching Blades . . . . . . . . . . . . . . . . . . . . . . .11

Accessory Part Numbers . . . . . . . . . . . . . . . . . . . 11

Section 2: Operating Instructions . . . . . .12

Tractor Shut Down Procedure . . . . . . . . . . . . . . .12

Operation Check . . . . . . . . . . . . . . . . . . . . . . . . . 12

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Mowing Instructions . . . . . . . . . . . . . . . . . . . . . . . 12

Un-hooking the Mower . . . . . . . . . . . . . . . . . . . . . 13

General Operating Instructions . . . . . . . . . . . . . . 14

Section 3: Adjustments . . . . . . . . . . . . . .15

Leveling the Mower . . . . . . . . . . . . . . . . . . . . . . .15

Cutting Height Adjustment . . . . . . . . . . . . . . . . . .15

3-Point Hitch Adjustments . . . . . . . . . . . . . . . . . .16

Belt Tension . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Section 4: Maintenance and Lubrication 17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Service Mowing Blades . . . . . . . . . . . . . . . . . . . .17

Blade Inspection . . . . . . . . . . . . . . . . . . . . . . .17

Blade Removal And Installation . . . . . . . . . . . .17

Blade Sharpening or Replacement . . . . . . . . .18

V-Belt Installation . . . . . . . . . . . . . . . . . . . . . . . . .19

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Driveline Shaft U-Joints . . . . . . . . . . . . . . . . . .20

Inner Tube Bearings . . . . . . . . . . . . . . . . . . . .20

Driveline Profiles . . . . . . . . . . . . . . . . . . . . . . .20

Gearbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Wheel Support Bushings & Wheel Bearings . .21

Bearing in Blade Spindle Hubs . . . . . . . . . . . .21

Section 5: Specifications & Capacities . .22

Section 6: Features and Benefits . . . . . .23

Section 7: Troubleshooting . . . . . . . . . . .24

Section 8: Appendix . . . . . . . . . . . . . . . . .25

Torque Values Chart . . . . . . . . . . . . . . . . . . . . . .25

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Important Safety Information

12/10/07 FDR3590 Rear Discharge Grooming Mowers 310-229M

Land Pride Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in

this manual.

Safety at All Times

Thoroughly read and understand

the instructions given in this

manual before operation. Refer to

the “Safety Label” section, read

all instructions noted on them.

Do not allow anyone to operate

this equipment who has not fully

read and comprehended this

manual and who has not been

properly trained in the safe

operation of the equipment.

▲Operator should be familiar with

all functions of the unit.

▲Operate implement from the

driver’s seat only.

▲Do not leave tractor or implement

unattended with engine running.

▲Dismounting from a moving

tractor could cause serious injury

or death.

▲Do not stand between the tractor

and implement during hitching.

▲Keep hands, feet, and clothing

away from power-driven parts.

▲Wear snug ﬁtting clothing to avoid

entanglement with moving parts.

▲Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

!Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

potential hazard to personal safety involved and extra

safety precaution must be taken. When you see this

symbol, be alert and carefully read the message that

follows it. In addition to design and conﬁguration of

equipment, hazard control and accident prevention

are dependent upon the awareness, concern,

prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of

equipment.

Be Aware of

Signal Words

A Signal word designates a degree or

level of hazard seriousness. The

signal words are:

Indicates an imminently hazardous

situation which, if not avoided, will

result in death or serious injury. This

signal word is limited to the most

extreme situations, typically for

machine components that, for

functional purposes, cannot be

guarded.

!DANGER

Indicates a potentially hazardous

situation which, if not avoided, could

result in death or serious injury, and

includes hazards that are exposed

when guards are removed. It may also

be used to alert against unsafe

practices.

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury. It

may also be used to alert against

unsafe practices.

!WARNING

!CAUTION

For Your Protection

▲Thoroughly read and understand

the “Safety Label” section, read all

instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put

tractor in park, turn off engine, and

remove the key.

▲Detach and store implements in a

area where children normally do

not play. Secure implement by

using blocks and supports.

OFF

REMOVE

Important Safety Information

FDR3590 Rear Discharge Grooming Mowers 310-229M 12/10/07

Land Pride

Table of Contents

Transport

Machinery Safely

▲Comply with state and local laws.

▲Maximum transport speed for

implement is 20 mph. DO NOT

EXCEED. Never travel at a speed

which does not allow adequate

control of steering and stopping.

Some rough terrain require a

slower speed.

▲Sudden braking can cause a

towed load to swerve and upset.

Reduce speed if towed load is not

equipped with brakes.

▲Use the following maximum

speed - tow load weight ratios as

a guideline:

20 mph when weight is less

than or equal to the weight of

tractor.

10 mph when weight is double

the weight of tractor.

IMPORTANT: Do not tow a load that

is more than double the weight of

tractor.

Use Safety

Lights and Devices

▲Slow moving tractors, self-

propelled equipment, and towed

implements can create a hazard

when driven on public roads. They

are difﬁcult to see, especially at

night.

▲Flashing warning lights and turn

signals are recommended

whenever driving on public roads.

Use lights and devices provided

with implement.

Keep Riders

Off Machinery

▲Riders obstruct the operator’s

view they could be struck by

foreign objects or thrown from the

machine.

▲Never allow children to operate

equipment.

These are common practices that may or may not be applicable to the products described in

this manual.

Practice Safe Maintenance

▲Understand procedure before

doing work. Use proper tools and

equipment, refer to Operator’s

Manual for additional information.

▲Work in a clean dry area.

▲Lower the implement to the

ground, put tractor in park, turn off

engine, and remove key before

performing maintenance.

▲Allow implement to cool

completely.

▲Do not grease or oil implement

while it is in operation.

▲Inspect all parts. Make sure parts

are in good condition & installed

properly.

▲Remove buildup of grease, oil or

debris.

▲Remove all tools and unused

parts from implement before

operation.

Important Safety Information

12/10/07 FDR3590 Rear Discharge Grooming Mowers 310-229M

Land Pride Table of Contents

Prepare for Emergencies

▲Be prepared if a ﬁre starts.

▲Keep a ﬁrst aid kit and ﬁre

extinguisher handy.

▲Keep emergency numbers for

doctor, ambulance, hospital and

ﬁre department near phone.

Tire Safety

▲Tire changing can be dangerous

and should be preformed by

trained personnel using the

correct tools and equipment.

▲When inﬂating tires, use a clip-on

chuck and extension hose long

enough to allow you to stand to

one side and NOT in front of or

over the tire assembly. Use a

safety cage if available.

▲When removing and installing

wheels, use wheel handling

equipment adequate for the

weight involved.

911

Wear

Protective Equipment

▲Protectiveclothingand equipment

should be worn.

▲Wear clothing and equipment

appropriate for the job. Avoid

loose ﬁtting clothing.

▲Prolonged exposure to loud noise

can cause hearing impairment or

hearing loss. Wear suitable

hearing protection such as

earmuffs or earplugs.

▲Operating equipment safely

requires the full attention of the

operator. Avoid wearing radio

headphones while operating

machinery.

Avoid High

Pressure Fluids Hazard

▲Escapingﬂuid under pressurecan

penetratethe skin causingserious

injury.

▲Avoid the hazard by relieving

pressure before disconnecting

hydraulic lines.

▲Use a piece of paper or

cardboard, NOT BODY PARTS, to

check for suspected leaks.

Wear protective gloves and safety

glasses or goggles when working

with hydraulic systems.

▲If an accident occurs, see a

doctor immediately. Any ﬂuid

injected into the skin must be

treated within a few hours or

gangrene may result.

Handle

Chemicals Properly

▲Protective clothing should be

worn.

▲Handle all chemicals with care.

▲Follow instructions on container

label.

▲Agricultural chemicals can be

dangerous. Improper use can

seriously injure persons, animals,

plants, soil, and property.

▲Inhaling smoke from any type of

chemical ﬁre is a serious health

hazard.

▲Store or dispose of unused

chemicals as speciﬁed by the

chemical manufacturer.

These are common practices that may or may not be applicable to the products described in

this manual.

Important Safety Information

FDR3590 Rear Discharge Grooming Mowers 310-229M 12/10/07

Land Pride

Table of Contents

Safety Labels

Your Grooming Mower comes equipped with all safety

labels in place. They were designed to help you safely

operate your implement. Read and follow their

directions.

1. Keep all safety labels clean and legible.

2. Replace all damaged or missing labels. To order new

labels go to your nearest Land Pride dealer or visit our

dealer locator at landpride.com.

3. Some new equipment installed during repair requires

safety labels to be affixed to the replaced component as

818-130C

Caution

13304

818-229C

Amber Reflector

15947

818-230C

Red Reflector

15946

specified by Land Pride. When ordering new components

make sure the correct safety labels are included in the

request.

4. Refer to this section for proper label placement.

To install new labels:

a. Clean the area the label is to be placed.

b. Spray soapy water on the surface where the label is to

be placed.

c. Peel backing from label. Press firmly onto the surface.

d. Squeeze out air bubbles with the edge of a credit card.

Important Safety Information

12/10/07 FDR3590 Rear Discharge Grooming Mowers 310-229M

Land Pride Table of Contents

818-556C

Danger: Thrown Object

818-555C

Danger: Rotating Blade

15945

818-142C

Danger:

Rotating Driveline

15944

818-237C

Caution: V-Belt

15945

Important Safety Information

FDR3590 Rear Discharge Grooming Mowers 310-229M 12/10/07

Land Pride

Table of Contents

818-558C

Warning:

General Safety

15943

818-540C

Danger: Guard Missing

13314

818-552C

Danger:

Rotating Driveline

ROTATING DRIVELINE

KEEP AWAY!

13314

Introduction

12/10/07 FDR3590 Rear Discharge Grooming Mowers 310-229M

Land Pride Table of Contents

Introduction Owner Assistance

The Warranty Registration card should be filled out by

the dealer at the time of purchase. This information is

necessary to provide you with quality customer service.

If customer service or repair parts are required contact a

LandPridedealer.Adealerhastrainedpersonnel,repair

parts and equipment needed to service the Grooming

Mower.

The parts on your Grooming Mower have been specially

designedandshouldonlybereplaced with genuine Land

Pride parts. Therefore, should your Grooming Mower

require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and

modelnumber whenordering parts fromyour LandPride

dealer.Besuretoincludeyourserialandmodel numbers

incorrespondencealso.Refer to Figure 1forthelocation

of your serial number plate.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new

Grooming Mower. If for any reason you do not

understand any part of this manual or are not satisfied

with the service received, the following actions are

suggested:

1. Discuss the matter with your dealership service

manager making sure he is aware of any problems

you may have and that he has had the opportunity to

assist you.

2. If you are still not satisfied, seek out the owner or

general manager of the dealership, explain the

problem and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

lpser[email protected]

15942

Land Pride welcomes you to the growing family of new

product owners.

This Grooming Mower has been designed with care and

built by skilled workers using quality materials. Proper

assembly,maintenanceandsafeoperatingpracticeswill

help you get years of satisfactory use from the machine.

Application

The Land Pride FDR3590 Rear Discharge Grooming

Mowers are designed and built to provide high

productivity and excellent cutting quality on well-

maintained lawn and turf surfaces. These mowers are

adapted for category 1 attachment and operation on 25-

60hputilitytractors. The 90"reardischargecuttingdecks

andhighlydurable constructionmakethem wellsuitedto

meet the mowing needs of large estate owners, golf

course, theme parks, municipalities, ranchers, horse

breeders, and commercial mowing and landscape

operations.Thereardischargecuttingdeckwillprovidea

superb quality of cut and superior clipping distribution

when grass is cut on a frequent basis and ground

conditions are not wet.

See “Section 5: Specifications & Capacities” on page

22 and “Section 6: Features and Benefits” on page 23

for additional information and performance enhancing

options.

Using This Manual

•This Operator’s Manual is designed to help familiarize

you with safety, assembly, operation, adjustments,

troubleshooting, and maintenance. Read this manual

and follow the recommendations to help ensure safe

and efficient operation.

•The information contained within this manual was

current at the time of printing. Some parts may change

slightly to assure you of the best performance.

•To order a new Operator’s or Parts Manual contact

your authorized dealer. Manuals can also be

downloaded, free-of-charge from our website at

www.landpride.com or printed from the Land Pride

Service & Support Center by your dealer.

Terminology

“Right” or “Left” as used in this manual is determined by

facing the direction the machine will operate while in use

unless otherwise stated.

Definitions

NOTE: A special point of information that the

operator must be aware of before continuing.

IMPORTANT: A special point of information related

to its preceding topic. Land Pride’s intention is that

this information should be read and noted before

continuing.

Section 1: Assembly and Set-up

FDR3590 Rear Discharge Grooming Mowers 310-229M 12/10/07

Land Pride

Table of Contents

Section 1: Assembly and Set-up

Tractor Requirements

This mower is designed with a 3-Point category I hitch.

Horsepowerrating of tractorshouldnotexceed 60 horse

power. Tractor’s rear power take-off (PTO) speed and

spline type must be capable of 540 RPM and 1 3/8”-6

spline rear power take-off.

Upper Hitch Arms

Refer to Figure 1-1:

1. Remove upper hitch bars (#1), upper hitch braces

(#2),andupperpivotinghitchsubassembly(#3)from

storage position on top of mower deck.

2. Bolt upper hitch braces (#2) to the mounting tabs

locatedon thebackofthe deckusing 5/8"-18x 11/2”

GR5 bolts (#4), lock washer (#5), and hex nut (#6).

3. Mount upper hitch bars (#1), to the inside of the front

hitch plates on the frame using 5/8"-18 x 1 3/4" GR5

bolts (#7), lock washers (#5) and hex nuts (#6).

NOTE: In order to maintain steering control, ballast

may need to be added to your tractor. To determine

whether or not to add the ballast, refer to your

tractors’ operator manual.

4. Remove 5/8"-18 x 5" GR5 long bolt (#8), lock washer

(#10),andhexnut(#11)from the upperpivotinghitch

subassembly.

5. Swing upper hitch bars (#1) up to a vertical position.

Raise upper hitch braces (#2) up inside the upper

hitch bars as shown.

6. Assemble upper pivoting hitch (#3), spacer top hitch

(#9), 5/8" x 5" long bolt (#8), lock washer (#10), and

hex nut (#11) as shown.

7. Tighten all installed 5/8” nuts to proper torque. See

Torque Values Chart on page 25.

Gauge Wheels

Refer to Figure 1-1:

1. Remove 1/2”-13 x 1 1/4” GR5 bolts (#16) securing

gauge wheel arms (#12) and turn gauge wheel arms

180 degrees as shown. Replace bolts and retighten

to proper torque per Torque Values Chart on page

25.

2. Mount gauge wheels (#13) to gauge wheel arms

(#12), placing the 1/4”, 1/2” and 1” spacers (#14) at

the desired depth. Secure gauge wheels with the

linchpins (#15).

Upper Hitch Arms Assembly

Figure 1-1 15941

Altri manuali per FDR3590

Indice

Altri manuali Land Pride Taglia erba

Land Pride

Land Pride Rotary Cutter RCR2684 Manuale utente

Land Pride

Land Pride FDR1648 Series Manuale utente

Land Pride

Land Pride FM31 Series Manuale utente

Land Pride

Land Pride 357-398M Manuale utente

Land Pride

Land Pride AFM4014 Manuale utente

Land Pride

Land Pride Accuz Z52 Manuale utente

Land Pride

Land Pride 357-344M Manuale utente

Land Pride

Land Pride FM20 Manuale utente

Land Pride

Land Pride DM36 Series Manuale utente

Land Pride

Land Pride Accu-Z Razor 357-044M Manuale utente

Land Pride

Land Pride AFM4214 Series Manuale utente

Land Pride

Land Pride Accu-Z Razor ZSR54 Manuale utente

Land Pride

Land Pride Patriot FDR1660 Manuale del proprietario

Land Pride

Land Pride Skid Steer Rakes SR2672 Manuale utente

Land Pride

Land Pride AFM4214 Series Manuale utente

Land Pride

Land Pride QH20 Series Manuale utente

Land Pride

Land Pride FM20 Manuale utente

Land Pride

Land Pride RCR26 Series Manuale utente

Land Pride

Land Pride Rotary Cutters RCR1860 Manuale utente

Land Pride

Land Pride Razor Pro ZRP44 Manuale utente

Land Pride

Land Pride FM2548 Manuale utente

Land Pride

Land Pride Rotary Cutter RC15 Manuale utente

Land Pride

Land Pride RCM5020 Series Manuale utente

Land Pride

Land Pride ZXT54 Series Manuale utente

Manuali Taglia erba popolari di altre marche

RHINO

RHINO 1958 Manuale utente

Wolf Garten

Wolf Garten Compact plus 40 B Manuale utente

Cub Cadet

Cub Cadet LTX 1045 Manuale utente

Craftsman

Craftsman 917.378461 Manuale utente

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuale utente

Challenge

Challenge CH18V2 Istruzioni operative

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuale utente

DEWEZE

DEWEZE ATM-725 Manuale operativo

Weed Eater

Weed Eater 180083 Manuale utente

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuale utente

Better Outdoor Products

Better Outdoor Products Quick Series Manuale utente

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuale operativo

MTD

MTD 795, 792, 791, 790 Manuale utente

Toro

Toro Groundsmaster 3505-D Manuale utente

Dennis

Dennis FT 610 Manuale utente

AIRFORCE

AIRFORCE F-15 Gen 3 Manuale utente

MTD

MTD 126-220-000 Manuale utente

Toro

Toro 74806 Manuale utente