Lanpro LP-5A Manuale utente
Wireless - Equipment
www.lanpro.com
LP-5a
Resetting to factory values 123 Manual.
LP5a_M123_ENC01W
LP-5a
Resetting to factory values 123
Manual.
www.lanpro.com
Wireless - Equipment - 5.8 GHz - LP-5a Resetting to factory values 123 Manual
Disconnect the power supply to the LP-5a.
1
2
3
4
Remove the reset button access screw as shown in gure 1.
Press the pushbutton through the porthole with a non metallic pin, (do not exert excess pressure that could damage the
pushbutton), only enough to feel the click of the pushbutton, keep pushing (Figure 2) while you reconnect power to the
equipment (Figure 3), wait for 20 seconds then release the pressure on the pushbutton.
The equipment will reset and go to factory values, use the IP address: 192.168.1.1, user: admin, Password: password.
5
Replace the screw with a new one furnished in the kit so as to maintain the quality of the seal.
Figure 2 Figure 3
Figure 1
Indice
Altri manuali Lanpro Punto di accesso wireless
Lanpro
Lanpro LP-1522 Manuale utente
Lanpro
Lanpro LP-288ai Manuale utente
Lanpro
Lanpro LP-1540ai Manuale utente
Lanpro
Lanpro LP-570G Manuale utente
Lanpro
Lanpro LP-1000 Manuale utente
Lanpro
Lanpro LP-1520AI Manuale utente
Lanpro
Lanpro LP-1518 Manuale utente
Lanpro
Lanpro LP-C290N Manuale utente
Lanpro
Lanpro LP-1540ai Manuale utente
Lanpro
Lanpro LP-N24 V2.0 Manuale utente
