Lantronix SDS1101 Manuale utente
2020 Copyright © Lantronix is a trademark of Lantronix. All rights reserved. 900-444 Rev. C1/20
SecureBox SDS1101 & SDS2101
Quick Start Guide
SecureBox SDS1101 & SDS2101
SDS1101 & SDS2101 QUICK START CONTENTS
What’s In the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Pinouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IP Addressing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Install the DeviceInstaller GUI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assign IP Address and Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SDS1101 LEDs/Troubleshoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
SDS2101 LEDs/Troubleshoot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
SecureBox SDS1101 & SDS2101
2WWW.LANTRONIX.COM 3
WHAT’S IN THE BOX
In addition to the SDS, the box contains the following items:
POWER SUPPLY (INTERNATIONAL UNITS):
PART #: COMPONENT DESCRIPTION:
520-080-R Power cube, 100-240VAC, with international adapters
500-163 Serial Cable
CD
Power Cord Restraint
DOCUMENTATION:
CD-ROM containing User Guide and Quick Start Guide.
DOCUMENTATION UPDATE
For the latest revision of this product document, please check our online
documentation at www.lantronix.com/support/documentation.
The SDS products allow serial devices to securely connect to and communicate
over an Ethernet network.
This Quick Start explains how to connect, configure, and troubleshoot your unit
using a network connection and our DeviceInstaller software. For more detailed
information or alternative configuration methods, refer to the User Guide on
the CD.
SDS1101/2101 PINOUTS
SDS1101 Pinout SDS2101 Pinout
Quick Start Guide
SDS1101/SDS2101
4WWW.LANTRONIX.COM
CONNECT
Complete the following steps in order. Refer to the numbers in the figure below.
1. Connect a serial device to your unit.
2. Connect an Ethernet cable to the RJ45 port.
3. Supply power to your unit using the power supply that was
included in the packaging.
Note: The required input voltage is 9-30 VDC (center +) or 9-24 VAC
(1.5W maximum power required).
4. Supply power to the serial device.
Quick Start Guide
SDS1101/SDS2101
5
IP ADDRESSING
Your unit must have a unique IP address on your network. Two ways to assign an
IP are described below.
DHCP
Many networks use an automatic method of assigning an IP address called DHCP.
If you are unsure whether your network uses DHCP, check with your systems
administrator.
The SDS looks for a DHCP server when it first powers up.The SDS has acquired
an IP address if the red LED stops flashing and the green Status LED is on
continuously. You can use the DeviceInstaller software to search the network for
the IP your unit has been assigned by the DHCP server and add it to the list of
Lantronix devices on the network.
If the SDS does not acquire an IP, or you do not use DHCP, you must assign a fixed
IP address.
FIXED IP ADDRESS
In most installations, a fixed IP address is desirable.The systems administrator
generally provides the IP address.
The IP address must be within a valid range, unique to your network, and in the same
subnet as your PC.You will need the following information before you set up the unit
as described in Assign IP Address.
IP Address:
___ ___ ___ ___
Subnet Mask:
___ ___ ___ ___
Gateway:
___ ___ ___ ___
Ethernet, Power, and Serial Connections
6WWW.LANTRONIX.COM
Quick Start Guide
SDS1101/SDS2101
7
ASSIGN IP ADDRESS AND CONFIGURE
1. Click the Start button on the Task Bar and select Programs > Lantronix >
DeviceInstaller > DeviceInstaller. The DeviceInstaller window displays.
2. Note the device IP address.
3. Access Web Manager by entering the device IP address in the address
bar of a browser. The device's factory default username is left blank and
factory default password is the last 8 characters of the Device ID (for
devices manufactured after January 1, 2020) or is left blank (for all older
devices).
4. Assign an IP address in the network settings and perform other
configuration.
Figure 1. DeviceInstaller Window
Note: For details about configuration settings, see the SDS User Guide.
INSTALL THE DEVICEINSTALLER GUI
1. Insert the CD into your CD-ROM drive.
If the CD does not launch automatically:
a) Click the Start button on the Task Bar and select Run.
b) Enter your CD drive letter, colon, backslash,
Launch.exe (e.g., E:\Launch.exe).
2. Click the DeviceInstaller button.
3. Respond to the installation wizard prompts.
8WWW.LANTRONIX.COM 9
LEDS/TROUBLESHOOT
SDS1101 contains the following LEDs:
• Power
• 10/100 Mb Link
• 10/100 Activity
• Diagnostics
• Status Channel 1
Simultaneously lit red and green LEDs means something is wrong. If the red
LED is lit or blinking, count the number of times the green LED blinks between
its pauses.The following table explains the LED functions.
Quick Start Guide
SDS1101/SDS2101
SDS1101 SERIAL LEDS MEANING
10/100 Mb Link steady green
Valid network connection
10/100 Activity blinking
Network packets transmitting and receiving
Diagnostic steady red and
3 blinks = Network controller error
status blinking green
4 blinks = EEPROM checksum error
5blinks = Duplicate IP address on network
Diagnostic blinking red and
5 blinks = No DHCP response
Status blinking green
Status steady green Serial port not connected to network
Status blinking green Serial port connected to network
WWW.LANTRONIX.COM 11
10
Quick Start Guide
SDS1101/SDS2101
SDS2101 SERIAL LEDS MEANING
Diagnostic steady red and
3 blinks = Network controller error
status blinking green
4 blinks = EEPROM checksum error
5blinks = Duplicate IP address on network
Diagnostic blinking red and
5 blinks = No DHCP response
Serial blinking green
Diagnostic blinking red and Serial
blinking green for 2 secs, off for 2 secs Setup menu active
CONTACT
For questions and technical support, please check our online knowledge base at
www.lantronix.com/support.
Lantronix, Inc.
7535 Irvine Center Drive
Suite 100
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: 949-453-3990
Fax: 949-453-3995
www.lantronix.com
LEDS/TROUBLESHOOT
SDS2101 contains the following LEDs:
• Power/Diagnostic
• RX Serial 1
• TX Serial 1
• RX Serial 2
• TX Serial 2
Simultaneously lit Diagnostic red and Serial green LEDs means something is
wrong. If the Diagnostic red LED is lit or blinking, count the number of times
the Serial green LED blinks between its pauses.The following table explains
the LED functions.
Altri manuali per SDS1101
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Lantronix Hardware di rete
Lantronix
Lantronix XPort AR Manuale utente
Lantronix
Lantronix ManageLinx Manuale utente
Lantronix
Lantronix XPress DR Manuale utente
Lantronix
Lantronix EDS3000PS Manuale utente
Lantronix
Lantronix Spider Manuale utente
Lantronix
Lantronix XPort AR Manuale utente
Lantronix
Lantronix SLC 8000 Manuale utente
Lantronix
Lantronix XPress DR+ Manuale utente
Lantronix
Lantronix xPico WiFi Manuale utente
Lantronix
Lantronix EDS8PR Manuale utente
Lantronix
Lantronix SISPM1040-582-LRT Manuale utente
Lantronix
Lantronix SLC 8000 Series Manuale utente
Lantronix
Lantronix Spider Manuale utente
Lantronix
Lantronix SecureLinx Manuale utente
Lantronix
Lantronix SecureLinx Manuale utente
Lantronix
Lantronix SLC8 Manuale utente
Lantronix
Lantronix XPort Manuale utente
Lantronix
Lantronix XPORT PROTM 900-560 Manuale utente
Lantronix
Lantronix x6010 Manuale utente
Lantronix
Lantronix XPort AR Guida rapida alla configurazione
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
