Lasertec CL2G Manuale utente
INSTRUCTION MANUAL
CL2G
MULTI-LINE LASER
2
SAFETY
Read the following safety instructions
before attempting to operate this product.
Keep these instructions in a safe place or store
in the carry case for future reference.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR
FUTURE REFERENCE.
WARNING: Read and understand all
instructions.
• Use the laser only with the specifically designated
batteries.
• Store the laser out of reach of children and other
untrained persons. Lasers are dangerous in the
hands of untrained users.
• Use only accessories that are recommended for
your model.
• Tool service must be performed only by qualified
repair personnel. Repairs, service or maintenance
performed by unqualified personnel will void the
warranty. Only approved and authorised service
technicians can carry out warranty repairs.
• Do not use optical tools such as a telescope or
transit to view the laser beam. Serious eye injury
could result.
• Do not place the laser in a position which may
cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury could
result.
• Do not position the laser near a reflective surface
which may reflect the laser beam toward anyone’s
eyes. Serious eye injury could result.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser
beam can cross any person at head height.
!
3
• Do not let children come in contact with the laser.
• Turn the laser off when it is not in use. Leaving
the laser on increases the risk of staring into the
laser beam.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury
may result.
• Do not remove or deface warning labels.
• Position the laser securely on a level surface.
Damage to the laser or serious injury could result
if the laser falls.
WARNING: DO NOT DISASSEMBLE
THE LASER.
There are no user serviceable parts inside.
Disassembling the laser will void all warranties on
the product. Do not modify the product in any way.
Modifying the tool may result in hazardous laser
radiation exposure.
!
!
CAUTION: Class 2 Laser Product
• Never look into the laser beam directly
and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the
laser beam can cross any person at head height.
• Do not let children come in contact with the laser.
SAFETY (continued)
4
ITEM CHECKLIST
Please ensure the following items are included with your laser level.
If anything is missing please contact your retailer.
Lasertec CL2G
AA alkaline batteries
Laser target
INCHES CM
1
1
2
3
4
5
6
7
2
3
Carry pouch
Magnetic mount
5
LASER OVERVIEW: FRONT
Laser port
Laser port
1/4” tripod thread
Control panel
Locking switch
Battery door cover
6
LASER OVERVIEW: CONTROL PANEL
LED pulse mode indicator
•Power
•Pulsemode(press and hold for 3 seconds)
7
MAGNETIC MOUNT OVERVIEW
1/4” thread
Screw fixing point
Rotating base
Magnet
Magnet
Screw fixing point
5/8” x11 thread
5/8” x 11 thread
1/4” thread
1/4” thread thumb screw
8
POWER SUPPLY
• The instrument is powered by four AA alkaline
batteries.
Battery Replacement
• Remove the battery cover door and the
batteries.
• Insert the batteries according to polarity and
replace the battery cover door.
SET UP
• Select a place as close as practical to the work
site. Ensure the location is clear of traffic.
• Place the instrument on a level surface such as a
bench or mount.
• To mount the instrument onto the supplied
magnetic mount, follow the instructions on page
10.
USING YOUR LASER
OPERATION
Powering on (self levelling)
• To turn the instrument on, slide the locking
switch to the “unlocked” position. Self levelling
will commence and all beams will activate.
• If the instrument is outside the self levelling
range the instrument will not level causing the
laser beam to flash on and off repeatedly. If this
occurs, reposition the instrument onto a level
surface until the instrument can level off.
• Press the power button to cycle through the
active beams.
Powering off
• To turn the instrument off, slide the locking
switch to the “locked” position.
• Press and hold the power button for 3 seconds.
9
Tilt lock function (manual mode)
• Ensure the locking switch is in the “locked”
position.
• Press the power button to activate the laser
beams.
• The instrument can now be tilted to the desired
angle. The beams will flash approximately every
5 seconds to alert the user that the instrument is
in manual mode.
When in tilt lock function (manual mode) the
instrument will not self level and correct for
vibrations and/or disturbances.
Pulse mode cannot be enabled whilst the
instrument is in manual mode.
i
Self-levelling beam position (recommended)
Tilt lock function (manual mode)
i
Always slide the locking switch to the
“locked” position when transporting the
instrument or moving around the job site.
!
USING YOUR LASER (continued)
10
USING THE MAGNETIC MOUNT
Mounting onto a magnetic surface
• Attach the instrument to the mount using the 1/4”
thumb screw.
• Attach the mount to a metal surface, ensuring that
the mount has a strong hold before releasing your
hands.
• To rotate the instrument on the mount, twist the
mount platform. This can be rotated up to 180°.
Mounting via screw fixing points
• Attach the instrument to the mount using the 1/4”
thumb screw.
• Fix a screw into a secure surface and hook the
mount over the screw. Ensuring that the mount has
a strong hold before releasing your hands.
• To rotate the instrument on the mount, twist the
mount platform. This can be rotated up to 180°.
Mounting onto a tripod
• Attach the mount onto the tripod via the 1/4” or
5/8” x11 thread.
• Attach the instrument to the mount using the 1/4”
thumb screw.
• To rotate the instrument on the mount, twist the
mount platform. This can be rotated up to 180°.
The tripod is an optional accessory which can
be purchased from your retailer.
i
USING YOUR LASER (continued)
Indice
Altri manuali Lasertec Livello laser
