Lathem 1000E Manuale utente
Lathem Time Corporation
ENGLISH
3
To enter the program setting mode, you should plug the AC adapter into the AC outlet and
remove the cover. Thereafter press the SELECT button once. Then the clock goes into the
program mode showing the " " on the display positioned at the "TIME".
Function of 3 control buttons
SELECT : You can select the desired program setting mode by pressing this SELECT button.
Selected program setting mode is indicated by the " " mark on the display.
CHANGE : When you press the CHANGE button, you can increment the set value.
SET : You can set the value selected on the display by pressing the SET button. Thereafter you
press this SET button again, you can return the clock to the normal operation mode.
HOW TO PROGRAM THE CLOCK
Control buttons
Program modes
8
4
16
SETTING THE STARTING DATE OF DAYLIGHT SAVING TIME
Example: Daylight saving time starts on Sunday, March 25, 2001.
Press the SELECT button and position
the " " mark at the "D.S.T. START".
At that moment, the "Year" flashes.
(The flashing means it can be changed.)
Change the "Year".
In case of the example, press the
CHANGE button to set at "01". And then
press the SET button.
At that moment, the flashing changes
from "Year" to "Month".
Step 1
D.S.T.
START
SELECT CHANGE SET
Change the "Month".
Press the CHANGE button to set at "3".
And then press the SET button.
At that moment, the flashing changes
from "Month" to "Date".
Step 2
Change the "Date".
Press the CHANGE button to set at "25".
And then press the SET button.
Step 3
After you finish setting the starting date of
D.S.T., press the SET button once again.
Now the starting date of D.S.T. setting has
been completed.
Go on to the "SETTING THE ENDING
DATE OF DAYLIGHT SAVING
TIME".
Step 4
SETTING THE DAYLIGHT SAVING TIME
Example: Start date Sunday, March 25, 2001.
End date Sunday, October 28, 2001.
If you set as the above, the time clock remembers the start date as the last Sunday of March
and the end date as the last Sunday of October. Once set, the time clock automatically
updates the settings every year thereafter. No further manual setting is necessary.
Year Date
Month
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET
20
17
SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME
Example: Daylight saving time ends on Sunday, October 28, 2001.
Press the SELECT button and position
the " " mark at the "D.S.T. END".
At that moment, the "Year" flashes. (The
flashing means it can be changed.)
Change the "Year".
In case of the example, press the
CHANGE button to set at "01". And then
press the SET button.
At that moment, the flashing changes
from "Year" to "Month".
Step 1
D.S.T.
END
SELECT CHANGE SET
Change the "Month".
Press the CHANGE button to set at "10".
And then press the SET button.
At that moment, the flashing changes
from "Month" to "Date".
Step 2
Change the "Date".
Press the CHANGE button to set at "28".
And then press the SET button.
Step 3
After you finish setting the ending date of
D.S.T., press the SET button once again.
Now the ending date of D.S.T. setting has
been completed. Replace the cover and
lock.
IMPORTANT: If you do not complete
Step 4, the clock will not print.
Step 4
Year Date
Month
D.S.T.
END
SELECT CHANGE SET
D.S.T.
END
SELECT CHANGE SET
D.S.T.
END
SELECT CHANGE SET
ENGLISH
21
DELETING THE DAYLIGHT SAVING TIME SETTING
Press the SELECT button and position
the " " mark at the "D.S.T. START".
At that moment, the "Year" flashes. (The
flashing means it can be changed.)
Next, press the SET button. At that
moment, the flashing changes from
"Year" to "Month".
Step 1
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
Press the CHANGE button to set at
" ". And then press the SET button.
At that moment, the flashing changes
from "Month" to "Date".
Step 2
Press the SET button again. At that
moment, the flashing changes from
"25" to " ".
Step 3
Press the SET button once again.
Now the D.S.T. deleting has been
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 4, the clock will not print.
Step 4
Year Date
Month
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET
D.S.T.
START
SELECT CHANGE SET
18
To delete and cancel the daylight saving time setting, change the display of "Month" of the
starting setting to " ".
Example: Change March 25, 2001 of "D.S.T. START" and delete daylight saving time setting.
22
Altri manuali per 1000E
1
Indice
Altri manuali Lathem Orologio
Lathem
Lathem 100E Manuale utente
Lathem
Lathem DWA-4000 Manuale utente
Lathem
Lathem 6000E Manuale utente
Lathem
Lathem 1000E Manuale utente
Lathem
Lathem 900E Manuale utente
Lathem
Lathem 4000 Series Manuale utente
Lathem
Lathem DWA-4000 Manuale utente
Lathem
Lathem 700E Manuale utente
Lathem
Lathem 1600E Manuale utente
Lathem
Lathem LTR-512 Istruzioni per il montaggio
Lathem
Lathem 1200 Series Manuale utente
Lathem
Lathem DDC2 Series Manuale utente
Lathem
Lathem 7000E Manuale utente
Lathem
Lathem Airtime AT-DDC4 Manuale operativo
Lathem
Lathem LTR4-512 Manuale operativo
Lathem
Lathem 900E Manuale utente
Lathem
Lathem 1221 Manuale utente
Lathem
Lathem PAYCLOCK PC50 Manuale utente
Lathem
Lathem Airtime AT-DDC4 Manuale operativo
Lathem
Lathem Airtime AT-DDC4 Manuale operativo
