LawnMaster CLBC4009K Manuale utente
CLBC4009K
Operators Manual
Read all safety rules and instructions carefully before operating this tool.
Distributed By Cleva North America 601 Regent Park Court Greenville, SC 29607 (866)-384-8432
40V-9" Li-Ion Cordless Brush Cutter CLBC4009K
EN p. 2
Type Cordless, Battery-Powered
Rated No Load Speed 7000 r/ Min
Max. cutting capacity 9’’
Cutting device Metal Blade,4 Teeth
Weight 9.2 Lbs Without Battery
2
CONTENTS
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
SYMBOLS
KNOW YOUR CORDLESS BRUSH CUTTER
ASSEMBLY
BATTERY PACK AND CHARGER
OPERATION
CARE AND MAINTENANCE
TROUBLESHOOTING
ENVIRONMENTALLY SAFE BATTERY DISPOSAL
WARRANTY
EXPLODED VIEW
PARTS LIST
NOTES
2
2
3-8
9-10
11-12
13-15
16
16-19
19-20
21
22
23
24
25
26
CONTENTS
PRODUCT SPECIFICATIONS
40V LITHIUM-ION CORDLESS BRUSH CUTTER
3
GENERAL SAFETY RULES
Child Safety
• Tragic accidents can occur if the operator is not aware of the presence of children.
• Keep children out of the brush cutting area and under the watchful care of a
responsible adult.
• Do not allow children under the age of 16 to operate this brush cutter.
Children who are 16 years of age and older must read and understand the
operating instructions and safety rules in this manual, and must be trained
and supervised by a parent.
• Stay alert, and turn the brush cutter off if a child or any other person enters the
mowing area.
• Look behind and down for small children before and while moving backwards.
• Use extreme care when approaching blind corners, doorways, shrubs, trees,
or other objects that may obscure your view of a child who may run into the
path of the brush cutter.
• Never allow children or others who are no familiar with the operating instructions
to use the brush cutter . Local regulations may stipulate the minimum age of
the user of this type of machinery.
Work Area Safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your
body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
4
GENERAL SAFETY RULES
• When operating a power tool outdoors, use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
Personal Safety
• Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables
better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust related hazards.
Power Tool Use And Care
• Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
5
GENERAL SAFETY RULES
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
Battery Tool Use And Care
• Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tools serviced by a qualified repair person using only identical
replacement parts. This will ensure that safety of the power tool is maintained.
Training
• Read the instructions carefully. Be familiar with the controls and the proper
use of the product.
• Never allow people unfamiliar with these instructions or children to use the
product. Local regulations can restrict the age of the operator.
6
GENERAL SAFETY RULES
• Keep in mind that the operator or user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
• Never operate the product while people, especially children, or pets are nearby.
• Wear eye protection and stout shoes at all times while operating the product.
Operation
• Use the product only in daylight or good artificial light.
• Never operate the product with damaged guards or shields or without guards
or shields in place.
• Keep hands and feet away from the cutting device at all times and especially
when switching on the motor.
• Before using the product and after any impact, check for signs of wear or
damage and repair as necessary.
• Always disconnect the product from the power supply (i.e. remove the plug
from the power supply or the battery pack)
• whenever leaving the product unattended;
- before clearing a blockage;
- before checking, cleaning or working on the product;
- after striking a foreign object;
- whenever the product starts vibrating abnormally.
• Take care against injury to feet and hands from the cutting device.
• Always ensure that the air vents are kept clear of debris.
• Never use replacement parts or accessories not provided or recommended
by the manufacturer.
• Wear slip-resistant foot protection and protective clothing when using this product.
• Always keep proper footing and operate the product only when standing on a
fixed, secure and level surface. Change working positions regularly to avoid
tiredness and ensure a comfortable working position at all times.
• The use of this product may be restricted due to national regulations.
Maintenance And Storage
• Disconnect the product from the power supply (i.e. remove the plug from the
power supply or the battery pack) and check for damage after use.
• Disconnect the product from the power supply (i.e. remove the plug from the power
supply or the battery pack) before carrying out maintenance or cleaning work.
• Use only the manufacturer’s recommended replacement parts and accessories.
7
GENERAL SAFETY RULES
• Inspect and maintain the product regularly. Have the product repaired only by
an authorized service center or similar qualified specialist.
• When not in use, store the product out of the reach of children.
Brush Cutter Blade Safety Warnings
• Only use brush cutter blades if you have knowledge of how to use and handle them.
• Pay attention to the maximum rotational speed. The maximum rotational speed
marked on the brush cutter blade shall not be exceeded. Where stated, the
speed range shall be adhered to.
• Do not use working brush cutter blades which are cracked. Scrap of brush
cutter blades which bodies are cracked. Repairing is not permitted.
• Clamping surfaces shall be cleaned to remove dirt, grease, oil and water.
• Do not use loose rings or sleeves to «make up» bore sizes on brush cutter blades.
• Pay attention that fixed rings for securing the brush cutter blades have the
same diameter and at least 1/3 of the cutting diameter.
• Ensure fixed rings are parallel to each other.
• Handle brush cutter blades with care. Store them in the original packaging or
in special boxes. Wear gloves for handling and to reduce injuries.
• Ensure all guards are correctly fixed before using brush cutter blades.
• Before use, make sure that the brush cutter blade complies with technical
requirements of the power tool and correctly fixed.
• Use the supplied brush cutter blade only for cutting of wood, never for metal.
• Blade thrust may occur when the spinning blade contacts an object that it does
not immediately cut.
• A blade thrust can be violent enough to cause the unit and/or operator to be
propelled in any direction, and possibly lose control of the unit.
• Blade thrust can occur without warning if the blade snags, stalls or binds.
• Blade thrust is more likely to occur in areas where it is difficult to see the
material being cut.
Vibration And Noise Reduction
• To reduce the impact of noise and vibration emission, limit the time of operation,
use low-vibration and low-noise operating modes as well as wear personal
protective equipment.
• Take the following points into account to minimize the vibration and noise
exposure risks:
8
GENERAL SAFETY RULES
• Only use the product as intended by its design and these instructions.
• Ensure that the product is in good condition and well maintained.
• Use correct cutting attachments for the product and ensure they in good condition.
• Keep tight grip on the handles/grip surface.
• Maintain this product in accordance with these instructions and keep it well
lubricated (where appropriate).
• Plan your work schedule to spread any high vibration tool use across a longer
period of time.
Emergency
Familiarize yourself with the use of this product by means of this instruction manual.
Memorize the safety directions and follow them to the letter. This will help to
prevent risks and hazards.
• Always be alert when using this product, so that you can recognize and handle
risks early. Fast intervention can prevent serious injury and damage to property.
• Switch off and disconnect from the power supply if there are malfunctions.
Have the garden power tool checked by a qualified professional and repaired,
if necessary, before you operate it again.
Residual Risks
Even if you are operating this product in accordance with all the safety
requirements, potential risks of injury and damage remain. The following dangers
can arise in connection with the structure and design of this product:
• Health defects resulting from vibration emission if the product is being used over
long periods of time or not adequately managed and properly maintained.
• Injuries and damage to property due to broken cutting attachments or the
sudden impact of hidden objects during use.
• Danger of injury and property damage caused by flying objects.
SYMBOLS
9
On the product, the rating label and within these instructions you will find among others he following
symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries
and damage to property.
n
o
DNOITANALPXE/NOITANGISENEMA
SLOBMY
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W
hrs
/min Per Minute
Designates that this tool is in compliance with
Lithium-Ion battery recycling program requirements
Safety Alert Symbol Precautions that involve your safety.
Eye and Head Protection
Gloves
Safety Footwear
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty protective gloves when
handling the pole saw and the blade.
Kickback
Electric Shock
No Hands Symbol
Keep Bystanders Away Keep all bystanders at least 50' (15 m) away.
Failure to use in dry conditions and to observe safe
practices can result in electric shock.
DANGER! Beware of kickback.
Risk of Electrocution DANGER! Risk of electrocution!
Failure to keep your hands away from the blade will
No Load Speed
Class II Construction
Lithium-Ion Battery
Recycling
Read the Operator’s Manual
Rational speed, at no load
Double-insulated construction
Hours
Watts Power
Time
Revolutions, strokes, surface speed, orbits etc.,
per minute
Wear eye and head protection when operating this
equipment.
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
10
The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service
technician. For service we suggest you return the product to your nearest
AUTHORIZED
SERVICE CENTER for repair. When servicing, use only identical replacement parts.
WARNING
To avoid serious personal injury, do not attempt to use this product until you have read this Owner's
Manual thoroughly and understand it completely. If you do not understand the warnings and
instructions in this Owner's Manual, do not use this product. Call the Toll-free Helpline
(866)-384- 8432 for assistance. The operation of any power tool can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before operating a power tool, always
wear safety goggles, safety glasses with side shields, or a full face shield when needed.
We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection that is marked to comply with ANSI Z87.1.
WARNING
The operation of any power tool can result in foreign objects being thrown into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always
wear safety goggles or safety glasses with side shields and, when needed, a full face shield.
DANGERIndicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
WARNING Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTIONIndicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION(Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
SYMBOLS
SAVE THESE INSTRUCTIONS
SYMBOL SIGNAL MEANING
We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked to comply with ANSI Z87.1.
Indice
Altri manuali LawnMaster Decespugliatore
LawnMaster
LawnMaster BC451 Manuale di installazione
LawnMaster
LawnMaster PBT4346T Istruzioni per l'uso e l'installazione
LawnMaster
LawnMaster NPTBSP2609A Manuale utente
LawnMaster
LawnMaster NPTBSP2609A Manuale utente
LawnMaster
LawnMaster NPTBSP2609A Manuale utente
LawnMaster
LawnMaster LMDGJ260H-BC Manuale utente
