7
SPECIFIC SAFETY INFORMATION
Training
1.
2.
3.
4.
Read the operating and service instruction manual carefully. Be thoroughly familiar with the
controls and the proper use of the equipment. Know how to stop the unit and disengage the
controls quickly.
Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
Keep the area of operation clear of all persons, particularly small children, and pets.
Keep in mind that the operator or user is responsible for accidents or occurring to other
people,their property,and themselves.
Preparation
1.
2.
3.
4.
5.
Thoroughly inspect the area where the equipment is to be used and remove all foreign objects.
Disengage all clutches and shift into neutral before starting the motor.
Do not operate the equipment without wearing adequate outer garments. Wear protective
footwear that will improve footing on slippery surfaces.
Use extension cords and receptacles as specified by the manufacturer for all units with electric
drive motors or electric starting motors.
Never attempt to make any adjustments while the motor is running.
Operation
Do not put hands or feet near or under rotating parts.
Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert
for hidden hazards or traffic. Do not carry passengers.
After striking a foreign object, stop the motor, thoroughly inspect the machine for any damage,
and repair the damage before restarting and operating the machine.
Exercise caution to avoid slipping or falling.
If the unit should start to vibrate abnormally, stop the motor and check immediately for the cause.
Vibration is generally a warning sign of trouble.
Stop the motor when leaving the operating position, before unclogging the tines, and when
making any repairs, adjustments, and inspections.
Take all possible precautions when leaving the machine unattended. Disengage the power
take-off, lower the attachment, shift into neutral, stop the motor, and remove the key（if
applicable）.
Before cleaning, repairing, or inspecting, shut off the motor and make certain all moving parts
have stopped.
1.
2.
3.
4.
5.
6.
7.
8.
