Leadtek GPS LR9580 Manuale utente
GPS LR9580
Quick Installation Guide
Bluetooth GPS Receiver
1. LR9580 main unit x 1
2. USB Power cable x 1
3. Cigarette lighter x 1
4. Quick Installation Guide x 1
1. Package Contents
1
LR9580 USB Power Cable
Cigarette Lighter Quick Installation Guide
GPS LR9580
Quick Installation Guide
Bluetooth GPS Receiver
2. Specifications
2
Technical Specifications
Environmental Characteristics
Physical Characteristics
Interface Specifications
3
Software
Electrical Specifications
Power
Battery
4
3. Getting Started
3.1 Charge
Charge with your USB cable (via PC)
or Car charger (via Car cigarette)
3.2 Power
Pull the switch on to turn on LR9580
5
3.3 Special Design
Convenient eyelet, easy to carry
Non-slip design
6
3.4 LED Display
7
GPS
Satellite
Bluetooth
Power
3.5 Bluetooth Connection
Step 1
First, turn your Bluetooth device on (for example, your PDA), and activate the
Bluetooth manager program. Secondly, turn the LR9580 on, and the Bluetooth
LED indicator starts quick blinking.
Step 2
Wait a while, tap the device name "LR9580" once it is found in your PDA, and
select SPP slave to add LR9580. When password is required, enter "0000".
Step 3
Once connected, the blinking starts to get slower. Now you can start your
navigation with the map software in your PDA.
Note: Connecting methods for different Bluetooth devices vary, so please
also refer to the manual for the specific device.
8
4. The Instruction for the GPS testing software-
GMonitor Light
Note: Please go to Leadtek website to download this software, and refer
to the instructions below.
4.1 How to connect LR9580 to
view the satellite reception
Step 1
When LR9580 is detected, the
message of the COM Port will
automatically pop up. As long as you
select the COM Port and your
preferred Baud rate, and then press
"Connect", LR9580 will be connected
and starts to receive the signals from
the satellites. The button "ScanPort"
can be used to search available Com
Ports.
9
Indice
Altri manuali Leadtek Ricevitore
