LECTROSONICS, INC.6
Operating Instructions
Powering On in Operating Mode
Press and hold the Power Button for several seconds until a moving
bar on the LCD progresses.
Hold
for
Rf On 470.100
-40 -20 +0
DBu
Powering On in Standby Mode
A brief press of the Power Button , and releasing it before the mov-
ing bar progresses, will turn the unit on with the RF output turned o.
In this Standby Mode the menus can be browsed to make settings and
adjustments without the risk of interfering with other wireless systems
nearby.
Hold
for
Rf On
Release Power
Button before
the moving bar
progresses to
enter standby
mode
470.100
-40 -20 +0
DBu
RF indicator blinks
After settings and adjustments are made, press the power button again
to turn the unit o, or turn on the Transmit function by entering the
main menu, selecting Xmit, then RF On?
Powering O
Powering
O . . .
From any screen, power can be turned o by select-
ing Pwr O in the power menu, holding the Power
Button in and waiting for the moving bar to
progress, or with the programmable switch (if it is
congured for this function).
If the power button is released, or the top panel
switch is turned back on again before the moving bar
progresses, the unit will remain turned on and the LCD will return to the
same screen or menu that was displayed previously.
NOTE: If the programmable switch is in the OFF position, power can
still be turned on with the power button. If the programmable switch is
then turned on, a brief message will appear on the LCD.
When you release the but-
ton, the unit will be opera-
tional with the RF output
turned on and the Main
Window displayed.
