LEGRAND PRO 21 7756 16 Manuale utente
PRO 21™
Radio scenario switch
7756 16
Characteristics Connection
N0064HA7/00
Power supply 1 lithium battery CR 2032
Radio frequency 868,3 Mhz
Range approx. 200 m in free field
+ 5°C to + 45°C
2
Pictogram fitting onto rocker
plates
Battery replacement
3
ON / OFF 1 / 2
ON
OFF
Description
LEARN indicator light
Control keysControl keys
Identification No.
LEARN key
Communication media
RF => Radio Frequency
Factory settings
On first powering up, pressing the
ON and OFF keys controls all the
lighting receivers in the factory set-
tings.
Pressing LEARN(1) twice cancels
this general control function.
(1) Programming or learning key.
4
Operation
The lighting scenario switch can simultaneously control a set of actors that have been associated with it during the lear-
ning(1), it then acts as leader(2) of the scenario.
Using the ON or OFF keys, the lighting scenario switch lets you control the lighting points linked to the actors that are
associated with the ON key, as follows :
- switch on by short press on the ON key
- switch off by short press on the OFF key
- increase light level by a long press on the ON key
- decrease light level by a long press on the OFF key
Note : only ON key learning is necessary, the OFF key is learnt automatically.
Using key 1 or 2, the lighting scenario switch lets you control the lighting points linked to the actors that are associated
with key 1 or 2, as follows :
- scenario(2) by a short press on key 1 or 2
- increase light level by a long press on key 1
- decrease light level by a long press on the key 2
(1)Learning : action of associating products to be controlled simultaneously from a central point. The procedure on page 5.
describes how to perform this association.
(2)Scenario : the set of products (actors) that are associated with a control key.
5
Learn scenario
Key
The indicator lamp
goes off
Press LEARN Press the command key that is to
control the scenario
Press LEARN
Press LEARN
Press the command key that is to be
associated with the leader
The indicator lamps of all the products go off.
The scenario is recorded.
Step 1 : Start the learn phase (on the LEADER)
Step 2 : Add an actor to the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
To add a number of products to the scenario, repeat operations and for each actor.
The indicator lamp
blinks slowly
The indicator lamp
blinks quickly
The indicator lamp
flashes
6
Modification of a scenario
Press LEARN Press the command key
that controls the scenario
The indicator lamps of all the product
in the scenario blink.
Press the command key
that is to be associated
Step 1: Open the scenario (on the LEADER)
Press LEARN
or
Press LEARN
To remove the product from the
scenario, go to step 3
Step 2 : Modify the state of an actor in the scenario (on the ACTOR)
Step 3 : Record the scenario (on the LEADER)
Press LEARN
The indicator lamps of all the products go off.
The scenario is recorded.
7
Clearing a scenario
Press LEARN
The scenario is cleared
Press the command key
and hold it down for 10 s
Clear all the scenarios linked with the command key (on the LEADER)
Press LEARN
Return the product to
factory configuration
Press LEARN and hold
down for 10 s
Clear all the scenarios linked to this product (on the LEADER)
5 s
5 s
8
DECLARATION DE CONFORMITE
Nous déclarons que les produits satisfont aux dispositions de :
We declare that the products satisfy the provisions of :
La Directive 1999/5/CE du Parlement européen
et du Conseil du 9 mars 1999 "R&TTE"
sous réserve d'une utilisation conforme à sa destination on condition that they are used in the manner
et/ou d'une installation conforme aux normes en vigueur intended and/or in accordance with the current
et/ou aux recommandations du constructeurinstallation standards and/or with the manufacturer's
recommandantions
Ces dispositions sont assurées pour la directive 1999/5/CEE par la conformité aux normes suivantes :
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards :
EN 60669-2-1
EN 300220-3
9
PRO 21™
Licht Szenarioschalter Funk
7756 16
Technische Daten Anschlüsse
Spannungsversorgung
1 x Lithiumbatterie CR 2032
Funkfrequenz 868,3 Mhz
Reichweite ca. 200 m freies Feld
+ 5°C bis + 45°C
10
Anbringen der Piktogramme
auf den Tasten
Auswechseln der Batterie
Indice
Lingue:
Altri manuali LEGRAND Interruttore
LEGRAND
LEGRAND EM357 Manuale utente
LEGRAND
LEGRAND Raritan MCD-108 Manuale di istruzioni
LEGRAND
LEGRAND VADDIO AV Bridge 2x1 Manuale utente
LEGRAND
LEGRAND Arteor Manuale utente
LEGRAND
LEGRAND The Radiant Collection Manuale utente
LEGRAND
LEGRAND 036 12 Manuale utente
LEGRAND
LEGRAND Adorne sofTap WNAL10 Manuale utente
LEGRAND
LEGRAND Plexo 0 698 50L Manuale utente
LEGRAND
LEGRAND 488 09 Manuale utente
LEGRAND
LEGRAND VANTAGE CIS10-DIN Manuale utente
LEGRAND
LEGRAND Galion K8/31D20AN-HK Manuale utente
LEGRAND
LEGRAND Radiant Series Manuale utente
LEGRAND
LEGRAND Celiane CB9050 Manuale utente
LEGRAND
LEGRAND Wattstopper LMDM-601 Manuale utente
LEGRAND
LEGRAND 036 00 Manuale utente
LEGRAND
LEGRAND Soliroc 778 51 Manuale utente
LEGRAND
LEGRAND WattStopper RH-200 Manuale utente
LEGRAND
LEGRAND 7 521 84 Manuale utente
LEGRAND
LEGRAND In One Plexo 695 10 Manuale utente
LEGRAND
LEGRAND Watt Stopper RS-100BA Manuale utente
