LEGRAND KEOR MOD Manuale utente

Part. LE13363AA-03/22-01 GF

3 111 19 – 3 111 20

Keor MOD

Additional installation instructions

EN ENGLISH 3

3 111 19 – 3 111 20

Keor MOD

Additional installation instructions

1. Introduction 4

1.1 Content of the kit 4

2. Installation procedure 5

2.1 Step 1 5

2.2 Step 2 5

2.3 Step 3 6

2.4 Step 4 7

2.5 Step 5 8

2.6 Step 6 (only for 3 111 19) 9

Index

1. Introduction

This manual is an addendum to the installation manual for Keor MOD.

It describes only the procedure to finalize the installation of the seismic basement of the Keor MOD with Seismic Kit 3 111 19

and 3 111 20.

For all the other information related to the installation and the use, consult the installation and user/manual for Keor MOD.

For the technical electrical data:

- 3 111 19 is equivalent to 3 104 80.

- 3 111 20 is equivalent to 3 104 81.

1.1 Content of the kit

a10

a11

a8 a5

POS. TORQUING MOMENT

a9 18 Nm

b1 36 Nm

TAG DESCRIPTION QTY

ALateral mount subassembly 1+1

a1 Base Plate Draw.6087 4

a9 Screws M8X20 Cl.8.8 4

a10 Safety washer for M8 DIN 128 Cl.8.8 4

a11 Flat Washer for M8 ISO 7092 Cl.8.8 4

BExternal shoulder Draw.5849 2

b2 Screws M10X20 Cl 8.8 6+6

b3 Safety washer for M10 DIN 128 Cl.8.8 6+6

b4 Washer for M10 DIN 125 Cl.8.8 6+6

a5 Nut UNI5587 C.L.8.8Cl.8.8 2

a7 Washer 12X36X2.5 UNI6593 1

a8 Washer for UNI1751Cl.8.8 1

Keor MOD

Additional installation instructions

2. Installation procedure

2.1 Step 1

Remove the UPS cabinet from the pallet by following the unpackaging instructions in the installation manual.

Do not proceed with step 2 until the unpackaging has been completed.

2.2 Step 2

Install the lateral mounts (A) to the ground keeping them aligned and with each other.

Use 6 (3+3) M16 certied seismic fasteners to install the subassemblies, following the indications provided by the supplier.

Install the lateral mounts in the nal placement of the unit.

Torquing moment for M16 provided by seismic anchor producer.

2. Installation procedure

2.3 Step 3

Align the unit with the guides anchored to the ground, refer to the image below to align the side holes, it is necessary

to keep a distance of 16 mm.

16mm

Keor MOD

Additional installation instructions

2.4 Step 4

• Assemble the ns (a2) with the support feet using grub screws (a3), nuts (b3) M12 and at washers.

• Mount the assembly of the four ns on the front brackets using the respective M8X20 screws and washers.

2. Installation procedure

2.5 Step 5

• Adjust the support feet one by one until the machine has reached the height of the xing holes on the side shoulder (A).

• Fix the side shoulders (A) with the preassembled shoulders (B) using the 12 (6 + 6) screws M10X20 (a4).

Keor MOD

Additional installation instructions

2.6 Step 6 (only for 3 111 19)

Only for the 3 111 19 (Keor MOD 125 kVA), in addition to the seismic basement, there are also ten metal bars and

twenty M4x8 screws to keep stable the battery packs in the drawers. For each battery drawer, after having followed

the instructions in the Keor MOD installation manual to install the battery packs, mount a metal bar with two relative

screws as shown in the picture:

The following picture shows the UPS with the seismic basement mounted:

2. Installation procedure

Altri manuali per KEOR MOD

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LEGRAND UPS

LEGRAND

LEGRAND KEOR HPE 60 kVA Manuale utente

LEGRAND

LEGRAND DAKER DK Plus Series Manuale utente

LEGRAND

LEGRAND MIDDLE ATLANTIC NEXSYS Manuale utente

LEGRAND

LEGRAND 3 108 43 Manuale utente

LEGRAND

LEGRAND NUMERIC HP i 33 Manuale utente

LEGRAND

LEGRAND 3 110 10 Manuale utente

LEGRAND

LEGRAND Keor MOD Series Manuale utente

LEGRAND

LEGRAND NUMERIC 2000 HR-V IBB 28AH Manuale utente

LEGRAND

LEGRAND KEOR TOWER SPE Manuale utente

LEGRAND

LEGRAND Archimod Manuale utente

LEGRAND

LEGRAND Trimod HE Guida di riferimento

LEGRAND

LEGRAND Seismic Kit Trimod HE Manuale utente

LEGRAND

LEGRAND 332 75 Manuale utente

LEGRAND

LEGRAND PREMIUS Manuale operativo

LEGRAND

LEGRAND STARK 10 kVA Manuale utente

LEGRAND

LEGRAND Niky S 1 kVA Manuale utente

LEGRAND

LEGRAND KEOR DC Manuale utente

LEGRAND

LEGRAND KEOR S 3KVA 1 Manuale

LEGRAND

LEGRAND Whad HE 800 VA Manuale utente

LEGRAND

LEGRAND LIMOGES Cedex 87045 Manuale di istruzioni

LEGRAND

LEGRAND KEOR T EVO 10-60 KVA Manuale utente

LEGRAND

LEGRAND NUMERIC Valura 1-3 kVA IBB Manuale utente

LEGRAND

LEGRAND Daker DK 4.5 kVA Manuale utente

LEGRAND

LEGRAND NUMERIC 1000 HR-V IBB 28AH Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente

ZincFive

ZincFive BC Series Manuale utente