Lehner Lifttechnik LIFTboy Manuale utente

User Manual

A – 4724 Neukirchen/W, Salling 8 Tel: 07278/3514-15, Fax: 07278/3514-12

Email: [email protected] Mobil: 0664/3526190

Web: www.lehner-lifttechnik.at

Tabel of contents

1. In general....................................................................................2

1.1.Producer ...................................................................................2

1.2.Utilisation ...................................................................................2

1.3.Important / Warnings.................................................................3

1.4.Unpacking and preparation ......................................................3

1.5.Assembly before starting up ....................................................4

1.6.Assembly - disassembly / fitting..............................................5

2. Describtion of Operation ..........................................................5

1.1 Label ...........................................................................................5

1.2 Safety function...........................................................................6

3. Demontage & Transport............................................................8

3.1 Transport....................................................................................8

3.2 Packing during the transport ...................................................8

4. Attendance and keeping ...........................................................8

4.1 Cleaning......................................................................................8

4.2 Keeping and storage .................................................................8

4.3 How to prevent corrosion?.......................................................8

4.4 Which attendance has to be made by the owner? .................8

5. Attendance & durabilityr...........................................................8

5.1 Durability and attendance.........................................................8

5.2 Fuses ..........................................................................................9

5.3 Assessment – Alround..............................................................9

5.4 Error search .............................................................................10

6. Technical data..........................................................................11

Platform Typ 1..................................................................... 11

Platform Typ 2..................................................................... 11

1. In general

1.1. Producer

Fa. Lehner Lifttechnik G.m.b.H.

A – 4724 Neulirchen am Walde, Salling 8

Tel: +43.7278.3514-15, Fax: +43.7278.3514-12

Mobil: 0664/3526190, E-mail: [email protected]

www.lehner-lifttechnik.at

1.2.Utilisation

Utilisation

The platform is produced for the utilisation inside and outside. The platform can be used

at temperatures of -20 up to + 40° C. At temperatures under – 20° C we recommend the

warming of the platform.

The platform is made for disabled persons, who have to do height differences of 835

mm (1-6 stairs)

It is possible to drive in and drive out of the platform on every side. In order to protect

the user of the platform from falling of the platform the platform is equipped with a safety

rail on both sides. In order to protect the upper stop there is a rail which drives with the

lift.

It is necessary to instruct the users and the assistants carefully.

1.3.Important / Warnings

- Please read the whole manual, before the platform is operated

- The installation of the platform is only allowed by Lehner Lifttechnik or a qualified

staff recommended by Lehner Lifttechnik.

- The maximum load capacity of 180 kg must not be exceeded.

- The platform is made for the transport of persons, it is only allowed to use the plat-

form how it is described in the manual.

1.4. Unpacking and preparation

Visual controlI:

If the packing is damaged at the receipt of the platform, the parts of the platform have to

be examined exactly, if there are apparent damages or defects. If there is suspect of

damages, the platform must not be used! The platform has to be examined by the com-

pany Lehner Lifttechnik or qualified staff by Lehner Lifttechnik.

Tabel of content

- platform and safety curtain

- access ramp

- rail / safety curb

- electric power supply

- application

- manual

1.5.Assembly before starting up

Safety curb 1 rail actuator

The assembly screws are pre-assembled on

the upper board. They will be screwed off.

The safety curb / the rail will be mounted on the

upper board. The screws will be tightened.

Fixing of the access ramp on the platform

1. Screws, disks, bush, screw nuts which are on the swivel joint of the side access

ramp will be removed.

2. A disk and a lubricated bush will be mounted

on the let swivel joint.

3. The disk will be mounted on the bush.

She must not be clamped.

4. The second disk will be

mounted on the screw, which will be mounted

through the bore of the safety curb.

5. The nut will be mounted and screwed down

but not so fix.

6. A disk and a lubricated bush will be mounted

te screw, which are mounted on the right

swivel joint.

7. The disk will be mounted on the bush,

She must not be clamped.

8. The second disk will be mounted on the screw,

which will be mounted on the angle profile

9. The nut will be mounted and screwed down – screw it that it is fix.

10. The nut on the safety cub (described in point 5) will be screwed down fix.

Assembly of the access ramp of the actuator

Attention: Single components are correctly mounted at the delivery.

1. The bush will be lubricated and placed on the actuator.

2. The disk will be mounted on the screw, which will be mounted from the middle of the

platform through the eye of the access ramp.

3. The 3 disks will be placed on the screw.

4. The access ramp will be lifted up in a position, in which the screw can be put through

the bush of the actuator.

5. A disk will be mounted on the screw.

6. The nut will be screwed on.

7. Lubricate the bottom and the fitting with oil or another lubricant.

Safety curb / rail, right – actuator side

1. The assembly screws are pre-assembled on

the upper board. They will be screwed off.

2. The safety curb / the rail will be mounted on the

upper board. The screws will be tightened.

End profile

1. Has to be mounted on the ends of the small safety curb.

Manual operation

The manual operation will be put on the rail.

1. The connector will be mounted in the connector bush in the safety curb.

2. The manual operation will be screwed down and the connector is waterproof.

Transformer

1. The connector of the transformer will be connected to the connector back at the plat-

form.

2. The power plug has to be connected to the supply network system.

Put on the energy.

1.6. Assembly - disassembly / fitting

The disassembly of the platform and the fitting of the accessories are only allowed to be

carried out by the company Lehner Lifttechnik or an approved qualified person.

The assembly has to be made according to the assembly manual.

The service staff gets the assembly manual either from the producer or the trader.

2. Describtion of Operation

1.1 Label

Company label with CE-sign and fabric number (placed on the platform).

Operation – electric

The manual operation can be mounted at the platform by the user of the platform. Op-

eration buttons and the symbols are easy to understand.

Up (Auf)- function, from the bottom level

1. When the platform is on the bottom level and the access ramp is

on the same level, the wheelchair user can drive on

the platform.

The rail that goes up with the platform is used as safety rail for the upper stop.

2. When you press the button „Up (AUF)“ the access ramp drives upstairs and takes

over the function of the safety rail.

“Up (AUF)” is not active as long as the button won´t be pressed.

3. If the access ramp/safety rail is in the upper position and “Up (AUF)” will be pressed

furthermore, the platform moves upstairs.

4. When the platform has reached the passage the wheelchair user can drive on the

passage.

Down (Ab) – function, from the top level

1. The wheelchair user dirves on the platform.

2. When you press the button "Down (AB)" the platform drives down. As long as the

button is pressed this function is active.

3. When the platform has reached the level and the button is still pressed, the access

ramp/safety rail will be lowered and the wheelchair user can leave the platform.

1.2 Safety function

Safety curtains

The pre-assembled safety curtains ensure that nobody will be jammed, if the platform is

in the highest position and drives down.

Assembly and safety curtains

1. The areas of the safety curtains are pre-assembled with chain belts.

2. A broomstick or something similar should be placed on the narrow side of the shear

construction.

3. The safety curtains have to be put over the upper board and have to be placed on

the broomstick, so that they hover freely.

4. The safety curtains are lifted and assembled. Always start with the angles in the

other side of the access ramp on the upper board of the platform. The safety curtains

have to be pressed on the hook-and-loop tape fastener.

5. The safety curtains on the other side have to be lifted and have to be assembled on

the upper board of the platform. The safety curtains have to be pressed on the hook-

and-loop fastener.

6. The broomstick can be removed now.

7. The safety curtains will be mounted in such a way that they follow the edges of the

bottom board of the platform.

Safety terminal strip

If a person or an object will be jammed during the downward stroke of the platform, the

downward stroke stops immediately if the safety terminal strips will be activated.

In order to switch off the safety function the “AUF” (Up) button has to be pressed. Now

the object can be removed, which has activated the safety terminal strip.

Emergency break

The emergency break should only be activated in an emergency. After using the emer-

gency break the platform should only be used again after consultation with the pro-

ducer/trader.

The emergency break is located on a central place on the safety curbstone.

After using the emergency break all movements are stopped.

Turn the emergency break on the outside, and after a short pressure on the “Up (Auf)”

button the platform is operative again.

Emergency lowering device – access ramp

The access ramp is mounted with a bolt on the actuator. This bolt will be screwed on an

the access ramp opens. Look at point 1. 5.

Important

When the bolt of the access ramp is removed, the access ramp is no longer mounted.

Therefore the access ramp has to be held when the bolt is removed.

User / assistant – emergency call system

The function of the emergency system has to thought over for each use individually.

One or more responsible person/s have to be educated in operating the platform right.

The responsible person has to be available in every emergency situation.

The name of the responsible person has to be told the user.

We recommend a battery backup for the user, which depend on the platform.

3. Disassambly & Transport

3.1 Transport

It is possible to deconstruct the platfform for the transport and the keeping, platform,

band, ramp.

3.2 Packing during the transport

The company Lehner Lifttechnik recommends to transport the platform in the original

packing.

4. Attendance and keeping

4.1 Cleaning

The lifting platform can be cleaned with a sponge or a brush and soap water.

The lifting platform can be hosed down with a normal water pressure, but not with a

pressure washer.

Acid, base or solvent may not be used for cleaning

4.2 Keeping and storage

No special requirements.

4.3 How to prevent corrosion?

The lifting platform is made out of corrosion-resist materials and therefore no corrosion

protection is necessary.

4.4 Which attendance has to be made by the owner?

Cleaning on demand.

5. Attendance & durability

5.1 Durability and attendance

The platform has to be undergone an attendance at least once a year due to the na-

tional law.

The platform has a durability of about 10 years with regular, daily use. After this period

the lifting platform has to be assessed by specialized staff in order to evaluate the fur-

ther application.

The durability is based to the conventional use, a regular cleaning as well as attendance

and an annual assessment of specialized staff or the company Lehner Lifttechnik

GmbH.

Spare-part lists and drawings can be requested at the producer or the trader.

5.2 Fuses

If a fuse drops out, the cause has to be examined by qualified staff. The exchange of the

fuse is only allowed by qualified staff, before the platform is operating again.

5.3 Assessment – Allround

With the Attendance it has to be recorded what has been examined and exchanged.

Parts which show abrasion or damages have to be replaced with new original parts.

1. Visual control of the product

- Control, if abrasion can be diagnosed.

- Control if the product has deformations.

- Control if the product has other forms of damages.

2. Examination of the product during the normal utilization

- All functions of the products with our without burden.

- Control emergency lowering device on proper function.

- Control voltage index on proper function.

3. Control of the electrical situation of the product.

- Control cable bushing.

- Control connection and plug.

- Control controler unit.

4. Control of the mechanic condition of the product

- Remove dirt and other uncleanliness.

- Maintenance and assessment of the vital parts of the product.

- Lubricate the product.

5. Point 2: repeat control, that everything is working properly.

- Were there new problems in Point 5.

- If new problems emerge, go back to point 2.

- If no problems were discovered; you can finish the Attendance.

Indice

Altri manuali Lehner Lifttechnik Sistema di sollevamento

Lehner Lifttechnik

Lehner Lifttechnik OMEGA-F Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik Delphin Documento tecnico

Lehner Lifttechnik

Lehner Lifttechnik Liftboy 1 Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik OMEGA Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik ALPIN Z300 Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik LIFTBOY 4 Manuale di istruzioni

Lehner Lifttechnik

Lehner Lifttechnik SIGMA Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik Liftboy 1 Manuale operativo

Lehner Lifttechnik

Lehner Lifttechnik STEPSAVER Manuale utente

Lehner Lifttechnik

Lehner Lifttechnik Stratos Manuale utente

Manuali Sistema di sollevamento popolari di altre marche

morse

morse 82H-124 Manuale utente

Braun

Braun NL955 Series Manuale utente

haacon

haacon 1889.10 Manuale utente

Protekt

Protekt AT 252 Manuale utente

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuale utente

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuale utente

Genie

Genie Z-60/34 Manuale utente

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuale utente

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuale utente

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuale di programmazione

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuale di programmazione

BERG

BERG BeNomic EasyLeaf Manuale utente

Powermate

Powermate LiftGate LG-3 Manuale utente

Snorkel

Snorkel TM12 Series Manuale utente

Terberg

Terberg OMNIDEKA Manuale utente

Harmar Mobility

Harmar Mobility AL625 Istruzioni operative

Rotary

Rotary SPO16 Manuale utente