Leica Geosystems SPRINTER 100 Manuale utente
LEICA
SPRINTER
User Manual
Version 1.1
English
2SPRINTER 100/100M/200/200M
Introduction
Purchase Congratulations on the purchase of a new Leica Geosystems Digital Level.
Product SPRINTER 100/100M/200/200M is the new high quality electronic digital level produced
by Leica Geosystems. It is designed to make levelling easier and quicker in any construc-
tion site. It employs techniques that electronically read the special bar-coded staff and the
gathered data is displayed on the screen almost instantly. Its innovative technology makes
the daily surveying jobs easier.
This manual contains important safety directions as well as instructions for setting up the
product and operating it. Refer to "11 Safety Directions" for further information.
Read carefully through the User Manual before you switch on the product.
Product
identification
The model and the serial number of your product are indicated on the type plate.
Enter the model and serial number in your manual and always refer to this information
when you need to contact your agency or Leica Geosystems authorized service work-
shop.
Type: _______________
Serial No.: _______________
Software-Version: _______________
SPRINTER 100/100M/200/200M 3
Symbols The symbols used in this manual have the following meanings:
Trademarks All trademarks are the property of their respective owners.
Type Description
Danger Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Warning Indicates a potentially hazardous situation or an unintended use
which, if not avoided, could result in death or serious injury.
Caution Indicates a potentially hazardous situation or an unintended use
which, if not avoided, may result in minor or moderate injury and/or
appreciable material, financial and environmental damage.
!Important paragraphs which must be adhered to in practice as they
enable the product to be used in a technically correct and efficient
manner.
4SPRINTER 100/100M/200/200M
Table of Contents
In this manual Chapter Page
1 How to Use this Manual 5
2 Description of the System 7
3 Measurement Preparation 10
4 User Interface 14
5 Operation 32
6 Data and Memory Management (only SPRINTER 100M/200M) 44
7 Check & Adjust 47
8 Messages 54
9Settings 59
10 Care and Transport 61
11 Safety Directions 63
12 Technical Data 75
Index 80
How to Use this Manual SPRINTER 100/100M/200/200M 5
1 How to Use this Manual
!It is recommended to set-up the product while reading through this manual.
Path Main Menu: Data Manager\ View Data stands for this working sequence:
From the Main Menu select Data Manager…. and then select View Data.
Screen CONFIGURE General Menu describes the name of the screen.
Page Screens can have more than one page. Units page describes a specific page of a screen.
For example: ’...in CONFIGURE Units & Formats, Units page...’.
Index The index is at the back of the manual.
!Keys, fields and options on the screens which are considered as self-explanatory are not
explained.
Validity of this
manual
This manual is valid for both SPRINTER 100/200 and SPRINTER 100M/200M. Sections
only valid for SPRINTER 100M/200M are marked accordingly.
6SPRINTER 100/100M/200/200M
How to Use this Manual
Available
documentation Name of
documentation
Description
SPRINTER
100/100M/200/200M
User Manual
All instructions required in order to operate the instrument at its
basic level are contained in this User Manual. Provides an over-
view of the system together with technical data and safety
directions.
SPRINTER
100/100M/200/200M
Quick-guide
2 pages of short description on operating the instrument.
Description of the System SPRINTER 100/100M/200/200M 7
2 Description of the System
Instrument
components
a) Horizontal fine motion screw
b) Battery compartment
c) Circular level
d) Gunsight
e) Focusing knob
f) Handle
g) Eyepiece
h) LCD display
i) Base plate
j) Levelling footscrew
a
j
i
h
g
f
e
d
b
c
Sprinter_01
8SPRINTER 100/100M/200/200M
Description of the System
Container Contents
a) SPRINTER
b) Batteries (4x)
c) Allen key
d) Manual, CD-ROM
e) Strap
f) Sunshade (optional)
g) Plumb adapter (optional)
h) Plumb bob (optional)
Description of the System SPRINTER 100/100M/200/200M 9
Accessories • Tripod
• Aluminum Staff (Region dependant)
• Rain cover (Optional)
• Sunshade (Optional)
• Power supply
• 4 AA alkaline dry - cells
• 4 Rechargeable batteries and charger (Optional)
• Data Transfer / Recording to external device
• Computer cable - serial interface (Optional)
• Computer software
• Leica Geo Office Tools for data downloading to PC
• Documentation
• User Manual
• Quick-guide
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Leica Geosystems Livello laser
Leica Geosystems
Leica Geosystems Runner 20 Manuale utente
Leica Geosystems
Leica Geosystems Rugby 610 Manuale utente
Leica Geosystems
Leica Geosystems NA2 Manuale utente
Leica Geosystems
Leica Geosystems TM6100A Manuale utente
Leica Geosystems
Leica Geosystems LS10 Manuale utente
Leica Geosystems
Leica Geosystems LINO L6R Manuale utente
Leica Geosystems
Leica Geosystems Rugby 670 Manuale utente
Leica Geosystems
Leica Geosystems LINO L6G Manuale utente
Leica Geosystems
Leica Geosystems Jogger 20 Manuale utente
Leica Geosystems
Leica Geosystems Sprinter 150 Manuale utente
