LevelOne KCM-0832 Manuale utente

LevelOne

KCM-0832 / KCM-1632

8 / 16-Port KVM Module

Quick Installation Guide

PackageChecklist

KCM-0832 or KCM 1632

Quick Installation Guide

Introduction

Each Host port connectoris HDDB15 type. The 3-in-1 VGA cable has a HDDB15 male connectorat one end, plug it into PC

port of KVM switch back panel, and plug theother end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connectorto keyboard port, and PS/2 mouse connectorto mouse port.

■USB Computers --- connect PS/2-USB changerto PS/2 keyboard connector, then plug the changerinto available USB

port. This single USB port can communicate both keyboard and mouse signals. It works as a standard HID (Human

Interface Device), no extra driver needed.

■Note: the PS/2 mouse connectorshould be left disconnected.

HardwareInstallation

Before installation, please make sure all of peripherals and computers have been turned off.

Install ModularKVMSwitch

1. Push KVM switch into the rails from rear of cabinet.

2. Slide the unit into therack and secure it to the rack.

Install the Computer/Server on Host Side

Local Console --- Connect the keyboard, mouse and monitor to the local consoleports.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys& OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first KVM

switch unit on the Daisy chain line is of bank 1 (the Master). A

standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable theScreen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will showup the Login

window waiting for username and password.If Security is disabled

it will showup the Status window

For SUPERVISOR to set the OSD back to factory default value

(except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access to the

KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”. Immediately,

the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch, and does not affect your

computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

Caps

Lock

Caps

Lock

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LevelOne Interruttore

LevelOne

LevelOne GTP-5271 Manuale utente

LevelOne

LevelOne GSW-2494 Manuale utente

LevelOne

LevelOne ProCon GSW-1290 Manuale utente

LevelOne

LevelOne IES-0853 Manuale utente

LevelOne

LevelOne KVM-0261 Manuale utente

LevelOne

LevelOne GSW-2473 Manuale utente

LevelOne

LevelOne GEP-5070 Manuale utente

LevelOne

LevelOne GTL-2881 Manuale utente

LevelOne

LevelOne FSW-1610TX Manuale utente

LevelOne

LevelOne IES-0842 Manuale utente

LevelOne

LevelOne GEU-2429 Manuale utente

LevelOne

LevelOne GEP-0823 Manuale utente

LevelOne

LevelOne FSW-2208TX Manuale utente

LevelOne

LevelOne IES-0851 Manuale utente

LevelOne

LevelOne FEP-0840 Manuale utente

LevelOne

LevelOne KVM-0831 Manuale utente

LevelOne

LevelOne OfficeCon GSW-2440 Manuale utente

LevelOne

LevelOne FEP-0812v4 Manuale utente

LevelOne

LevelOne KVM-0830 Manuale utente

LevelOne

LevelOne GSW-2473 Manuale utente

LevelOne

LevelOne FEP-0931 Manuale utente

LevelOne

LevelOne Infinity IES-1085 Manuale utente

LevelOne

LevelOne KVM-0223 Manuale utente

LevelOne

LevelOne EHU-0507T Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente