LevelOne KVM-8916 Manuale utente

LevelOne

KVM-0808/KVM-8916

19” Widescreen LCD Rack Console with

8/16-Port KVM Switch

Quick Installation Guide

Console Combo KVM Switch

Package Checklist

KVM Switch Unit

Quick Installation Guide

Computers/Servers Installation

Each Host port connector is KVM-Cabel type. The 3-in-1 VGA cable has a KVM-Cabel male connector at one end,

plug it into PC port of KVM switch back panel, and plug the other end’s connectors to PC VGA port, and if

■PS/2 Computers --- Connect PS/2 keyboard connector to keyboard port, and PS/2 mouse connector to mouse

port.

■USB Computers --- connect PS/2-USB changer to PS/2 keyboard connector, then plug the changer into

available USB port. This single USB port can communicate both keyboard and mouse signals. It works as a

standard HID (Human Interface Device), no extra driver needed.

■Note: the PS/2 mouse connector should be left disconnected.

Console Installation

Local Console --- Connect the keyboard, mouse and monitor to the local console ports.

Remote Console --- With a CAT5 cable, one end connecting to the RJ45 connector on the CAT5 extender module,

and the other end connecting to CAT5 Receiver.

The recommended Power Up sequence is as follows: monitor, KVM Switch, finally the computers.

Hotkeys & OSD

The table blow lists all supported hotkey commands.

Command

Function

Space bar

Bring up the OSD overlay screen

↑or↓

Moving Up or Down

[1,2,..,8] bank,

[01, 02,..,32] port

■The first digit is bank number starting with “1”. The first

KVM switch unit on the Daisy chain line is of bank 1 (the

Master). A standalone KVM switch is fixed in bank 1.

■The second & third digits are port number starting with “01”

PgUp

Previous bank

PgDn

Next bank

To enable/disable beep sound function

To enable/disable the Screen Saving function and 10min

auto-logout function. This function is default OFF (Disable).

To enable Firmware upgrade function

To log out the OSD. If Security is enabled it will show up the

is disabled it will show up the Status window

For SUPERVISOR to set the OSD back to factory default

value (except User Security settings).

For SUPERVISOR to activate the Auto-Scan function

For SUPERVISOR to enable/disable Security function. If the

Security is off, we don’t need user name & password to access

to the KVM system. This function is default OFF (Disable).

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #1 –To bring up the OSD overlay window, press “Caps Lock”, “Caps Lock”, and the “Space Bar”.

Immediately, the OSD overlay screen will appear. The superimposed menu screen is generated by the KVM switch,

and does not affect your computers or software function in any way.

Example #2 –To switch to Bank 1 Port1, press “Caps Lock”, “Caps Lock”, and “1”, “0”, “1”.

please enter next key in

2 seconds in the

Hotkey sequence

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Space Bar

please enter next key in

2 seconds in the

Hotkey sequence

Caps

Lock

Caps

Lock

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali LevelOne Interruttore

LevelOne

LevelOne Infinity IES-2880 Manuale utente

LevelOne

LevelOne GSW-2493 Manuale utente

LevelOne

LevelOne FEU-0511 Manuale utente

LevelOne

LevelOne FSW-1607TFX Manuale utente

LevelOne

LevelOne FSW-2106 Manuale utente

LevelOne

LevelOne Infinity IES-1611 Manuale utente

LevelOne

LevelOne GEL-2870 Manuale di programmazione

LevelOne

LevelOne KVM-0221 Manuale utente

LevelOne

LevelOne IES-0842 Manuale utente

LevelOne

LevelOne FSW-1609TFX Manuale utente

LevelOne

LevelOne FSW-2410TX Manuale utente

LevelOne

LevelOne FEP-0531 Manuale utente

LevelOne

LevelOne GSW-2650 Manuale utente

LevelOne

LevelOne GEU-1621 Manuale utente

LevelOne

LevelOne GSW-0840T Manuale utente

LevelOne

LevelOne 59910203 Manuale utente

LevelOne

LevelOne ViewCon KVM-0850 Manuale utente

LevelOne

LevelOne ProCon GSW-2496 Manuale utente

LevelOne

LevelOne GEL-2060 Guida rapida

LevelOne

LevelOne FEP-0511v1 Manuale utente

LevelOne

LevelOne GTL-5291 Manuale utente

LevelOne

LevelOne Infinity IES-1085 Manuale utente

LevelOne

LevelOne FGP-1031 Manuale utente

LevelOne

LevelOne FSW-0513 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente