LevelOne WAP-6010 Manuale utente
LevelOne
N_Max Wireless Access Point
WAP-6010
V1.0
Quick Installation Guide
English
Português
Deutsch
Svenska
Français
Español
繁體中文
Nederlands
简体中文
Dansk
한국어
Italiano
Table of Contents
ENGLISH 3
DEUTSCH 9
FRANÇ AIS 15
ESPAÑ OL 21
NEDERLANDS 27
DANSK 33
ITALIANO 40
46
PORTUGUÊS 52
SVENSKA 58
64
繁體中文 70
简体中文 76
한국어 82
88
DEFAULT SETTINGS
IP ADDRESS
192.168.0.254
USER NAME
ADMIN
PASSWORD
ADMIN
This guide covers only the most common situations. All
detail information is described in the user manual.
English
Connections
Front Panel
Please flip to the back side to connect the ports.
Panel Back Side
1. Connect both antennas to the antenna ports in
the both ends. Tilt the antennas for the better
radio reception.
2.
to the Ethernet switch, a router or your PC.
3. Connect the power adapter to wall plug and
then plug in the power input on the device.
LAN Status
WLAN Status
WPS
Status
WPS
Button
Power
Indicator
Configure the Device
1. Setup the IP Address of PC
Change the IP Address of PC: To configure the IP
Address, click the network icon to open the Ethernet
continue.
2. Login the device and configure
On the PC, open the browser (Internet Explorer 6.0 or
higher) and open the URL http://192.168.0.254/. It is
the default IPAddress of this device. The login window
pops for username and password. Enter the default
The first page will be the Status page. For the first time
manual for the details.
Setup Wizard Easy Installation
1. AP Mode
This is the default configuration that allows you to
connect to WAP-6010 as a wireless client. This
mode adds wireless functionality to your wired
network.
2. AP Client
WAP-6010 retrieves the signal from a Wireless AP
or Router and shares it to the wired Ethernet ports
on a PC or switch. WAP-6010 will not accept
wireless clients in this mode.
3. Bridge Mode
In Bridge Mode, WAP-6010 communicates using
BSSID (MAC addresses) to create a point-to-point
or point-to-multi-point connection between 2 or
more access points to help join LANs together.
WAP-6010 will not accept wireless clients in this
mode.
4. WDS Mode
This allows users to connect several APs together
via BSSID (MAC addresses) to create a
large-scale wireless network. This differs to
Bridge Mode because APs set in WDS Mode can
provide local wireless service to wireless clients.
5. Repeater Mode
WAP-6010 connects wirelessly to a wireless AP or
Router and repeats the signal. This allows you to
extend the distance of your wireless network.
Deutsch
Anschlüsse
Vorderseite
Die Anschlüsse befinden sich an der Rückseite.
Anschlüsse an der Rückseite
1. Schließen Sie die beiden Antennen an die
seitlichen Antennenanschlüsse an. Neigen Sie
die Antennen später im Betrieb, bis Sie den
bestmöglichen Empfang erzielen.
2. Schließlich Sie das Ethernet-Kabel an den
LAN-Port eines Ethernet-Switches, eines
Routers oder Ihres PCs an.
3. Verbinden Sie das Netzteil mit einer Steckdose,
schließen Sie anschließend den kleinen
Netzteilstecker an das Gerät an.
LAN-Status
WLAN-Status
WPS-
Status
WPS-
Taste
Betriebs-
anzeige
Gerät konfigurieren
1. IP-Adresse des PCs einrichten
IP-Adresse des PCs ändern: Zur Konfiguration der
IP-Adresse klicken Sie auf das Netzwerksymbol oder
öffnen die Netzwerkeinstellungen in der
Systemsteuerung. Klicken Sie auf
Properties(Eigenschaften) w
(Internetprotokoll (TCP/IP)), klicken
Properties(Eigenschaften).
Geben Sie die IP-ßen
Sie das Fenster anschließend wieder.
Altri manuali per WAP-6010
1
Indice
Lingue:
Altri manuali LevelOne Punto di accesso wireless
LevelOne
LevelOne WAB-6010 Manuale utente
LevelOne
LevelOne WAB-7400 Manuale utente
LevelOne
LevelOne WAP-8111 Manuale utente
LevelOne
LevelOne WAP-6011 Manuale utente
LevelOne
LevelOne WAB-3000 Guida all'installazione
LevelOne
LevelOne WAP-1001 Manuale utente
LevelOne
LevelOne WAP-6010 Manuale utente
LevelOne
LevelOne WAP-6002 Manuale utente
LevelOne
LevelOne EAP-110 Manuale utente
LevelOne
LevelOne WAB-6121 Manuale utente
LevelOne
LevelOne WAB-3003 Manuale utente
LevelOne
LevelOne WAB-1000 Manuale utente
LevelOne
LevelOne WAP-6121 Manuale utente
LevelOne
LevelOne WAP-6117 Manuale utente
LevelOne
LevelOne WAB-3001 Manuale utente
LevelOne
LevelOne WAP-6011 Manuale utente
LevelOne
LevelOne WAP-8131 Manuale di programmazione
LevelOne
LevelOne WAP-6012 Manuale utente
LevelOne
LevelOne WAP-6221 Manuale utente
LevelOne
LevelOne WAP-6202 Manuale utente
