LG BE320-SD Manuale utente
Owner's Manual
BE320-SD
DLP Projector
P/N: SAC30190915 Rev. A www.lg.com
English
1
English
Table of Contents
Table of Contents
Usage Notice
Safety Instructions .................................................2
Introduction
Product Features ...................................................5
Package Overview.................................................6
Product Overview ..................................................7
Connection Ports ................................................8
Control Panel ...................................................... 9
Remote Control Battery Installation .................. 10
Remote Control................................................. 11
Remote Control Operating Range .................... 13
Installation
Connecting the Projector .....................................14
Connect to Computer/Notebook ....................... 14
Connect to Video ..............................................15
Powering On/Off the Projector............................. 16
Powering On the Projector................................ 16
Powering Off the Projector................................ 17
Adjusting the Projected Image.............................18
Adjusting the Height of Projector Image ........... 18
Adjusting the Projector’s Zoom and Focus....... 19
Adjusting Projection Image Size ....................... 19
User Controls
On Screen Display...............................................21
How to operate .................................................21
IMAGE ..............................................................22
IMAGE | Advanced ........................................... 24
IMAGE | Advanced | Color................................ 25
IMAGE | Advanced | Input ................................25
SCREEN........................................................... 26
SETTING ..........................................................28
SETTING | Signal ............................................. 30
SETTING | Advanced ....................................... 31
OPTIONS.......................................................... 32
OPTIONS | Lamp Settings................................33
OPTIONS | Information.....................................34
OPTIONS | Advanced....................................... 35
Appendices
Troubleshooting ................................................... 37
Replacing the lamp.............................................. 42
Compatibility Mode ..............................................44
Computer Compatibility (Analog, PC)............... 44
RGB to RCA adapter ........................................ 44
Congurations of Terminals ................................. 45
Terminal: RS232 Pin Assignments ...................45
RS232 Protocol Function List ........................... 46
Dimensions..........................................................49
Specications.......................................................50
Regulation & Safety Notices................................ 51
2
English
Usage Notice
Safety Instructions are given in two forms as detailed below.
WARNING : The violation of this instruction may cause serious injuries and even death.
NOTES : The violation of this instruction may cause injuries or damage to the projector.
After reading this manual, keep it in the place that you can access easily.
Safety Instructions
Please take note of the safety instructions to prevent any poten-
tial accident or misuse of the projector.
Indoor Installation NOTES
Indoor Installation WARNING
Do not place the Projector in direct
sunlight or near heat sources such
as radiators, res, stove etc.
This may cause a re hazard !
Do not place ammable materials
in, on or near the projector
This may cause a re hazard!
Do not hang on the installed
projector.
It may cause the projector to fall,
causing injury or death.
Do not block the vents of the pro-
jector or restrict air-ow in any way.
This would cause the internal tem-
perature to increase and could cause
a re hazard or damage to the unit!
Do not place the projector close to
sources of steam or oil such as a
humidier.
This may create a re hazard or an
electric shock hazard !
Do not place the projector where it
might be exposed to dust.
This may cause a re hazard or dam-
age to the unit!
Do not use the projector in a damp
place such as a bathroom where it
is likely to get wet.
This may cause a re or an electric
shock hazard!
Do not place the projector directly
on a carpet, rug or place where
ventilation is restricted.
This would cause its internal tempera-
ture to increase and might create a re
hazard or damage the unit.
Ensure good ventilation around the
projector. The distance between
the projector and the wall should be
more than 30cm/12 inches.
An excessive increase in its internal
temperature may cause a re hazard
or damage to the unit!
When installing the projector on a
table, be careful not to place it near
the edge.
The projector could fall causing injury
and damage to the projector.
Only use a suitable stand.
Disconnect from the power supply
and remove all connections before
moving, or cleaning.
Only use the projector on a level
and stable surface.
It may fall and cause injury and/or
damage to the unit.
Power WARNING
Earth wire should be connected.
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e.a Projector
with a three-prong grounded AC plug must be
connected to a three-prong gronded AC outlet.
If grounding methods are not possible, have
a qualied electrician install a separate circuit
breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
The power cord should be inserted
fully into the power outlet to avoid
a re hazard!
This may cause a re hazard or dam-
age the unit.
Do not place heavy objects on the
power cord.
This may cause a re or an electric
shock hazard !
English
3
English
Usage Notice
Power WARNING
Never touch the power plug with a
wet hand
This may cause an electric shock-
hazard!
Do not plug-in too many items into
one power outlet.
It may result in overheating of the
outlet and create a re hazard!
Prevent dust from collecting on the
power plug pins or outlet.
This may cause a re hazard!
Power NOTES
Hold the plug rmly when unplug-
ging. If you pull the cord, it may be
damaged.
This may cause a re hazard !
Do not use if the power cord or the
plug is damaged or any part of the
power outlet is loose.
This may cause a re or an electric-
shock hazard or damage to the unit!
Ensure the power cord does not
come into contact with sharp or
hot objects.
This may cause a re or an electric-
shock hazard or damage to the unit!
Place the projector where people
will not trip or tread on the power
cord.
This may cause a re or an electric-
shock hazard or damage to the unit!
Do not turn the projector On/Off by plugging-in or unplugging the power
plug to the wall outlet.
(Allow the unit to cool before removing power.)
It may cause mechanical failure or could cause an electric shock.
Using WARNING
Do not place anything containing
liquid on top of the projector such
as owerpot, cup, cosmetics or
candle.
This may cause a re hazard or dam-
age to the unit!
In case of impact shock or damage
to the projector switch it off and
unplug it from the power outlet
and contact an authorized service
center.
This may cause a re or an electric
shock hazard or damage to the unit!
Do not allow any objects to fall into
the projector.
This may cause an electric shock
hazard or damage to the unit!
If water is spilt into the projector
unplug it from the power supply
immediately and consult your
Service Agent.
This may cause an electric shock
hazard or damage to the unit!
Dispose of used batteries carefully and safely.
In the case of a battery being swallowed by a child please consult a doctor
immediately.
Do not remove any covers.
High risk of Electric Shock!
Don’t look directly into the lens
when the projector is in use. Eye
damage may occur!
Do not touch metal parts during
or soon after operation since the
vents will remain very hot!
CAUTION concerning the Power Cord
It is recommend that most appliances be placed on a dedicated circuit; that is,a single outlet circuit which powers
only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s
manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock
or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an
authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appli-
ance.
4
English
Usage Notice
Using WARNING
If the projector is in a room that
experiences a gas leak, do not
touch the projector.
It can cause a re or a burn by a
spark.
Don’t look at laser beam directly as
it can cause eye damage!
Always open the lens door or
remove the lens cap when the
projector lamp is on.
Using NOTES
Do not place heavy objects on top
of projector.
This may cause mechanical failure
orpersonal injury!
Take care not to impact the lens
particularly when moving the
projector.
Do not touch the lens of the
projector. It is delicate and easily
damaged.
Do not use any sharp tools on the
projector as this will damage the
casing.
In the event that an image does
not appear on the screen please
switch it off and unplug it from
the power outlet and contact your
Service Agent.
This may cause a re or an electric
shock hazard or damage to the unit!
Do not drop the projector or allow
impact shock.
This may cause mechanical failure or
personal injury!
Cleaning WARNING
Do not use water while cleaning
the projector.
This may cause damage to the projec-
tor or an electric shock hazard.
In the unlikely event of smoke or
a strange smell from the projector,
switch it off , unplug it from the wall
outlet and contact your dealer or
service centre.
This may cause a re or an electric
shock hazard or damage to the unit!
Use an air spray or soft cloth that
is moist with a neutral detergent
and water for removing dust or
stains on the projection lens.
Cleaning NOTES
Contact the Service
Center once a year to
clean the internal parts of
the projector.
Accumulated dust can
cause mechanical failure.
When cleaning the plastic parts such as projector case, unplug the power and wipe it
with a soft cloth. Do not use cleanser, spray water or wipe with a wet cloth. Especially,
never use cleanser (glass cleaner), automobile or industrial shiner, abrasive or wax,
benzene, alcohol etc., which can damage the product.
Use an air spray or soft cloth that is moist with a neutral detergent and water for
removing dust or stains on the projection lens.
It can cause re, electric shock or product damage (deformation, corrosion and damage).
Others WARNING
Do not attempt to service the projector yourself. Contact your dealer or service center.
This may cause damage to the projector and could give an electric Shock as well as invalidating the warranty!
Others NOTES
Be sure to unplug if the projector is not to be used for
a long period.
Accumulated dust may cause a re hazard or damage to
the unit!
Only use the specied type of battery.
This could cause damage to the remote control.
English
5
English
Introduction
Product Features
■SVGA (800x600) Native resolution
■RGB monitor Loop Thru
(works on standby mode > 0.5 W)
■BrilliantColorTM Technology
■RS232C control
■Rapid shutdown
This device meets the EMC requirements ments for
home applicaces (Class B) and is intended for home
usage. This device can be used in all regions.
6
English
Introduction
Power Cable RGB Cable
Wireless Remote ControlProjector
Package Overview
This projector comes with all the items shown below.
Check to make sure your unit is complete. Contact your
dealer immediately if anything is missing.
Due to the differ-
ence in applications
for each country, some
regions may have dif-
ferent accessories.
Battery is included
inside the remote con-
trol.
N
o
t
e
Battery
C
R
2
0
2
5
Lithium Cell
3V
OWNER’S MANUAL
PROJECTOR
BE320-SD
http://www.lg.com
Copyright©2012LGE,
All Rights Reserved.
P/N 36.8PC01G001-A
User’s Manual
English
7
English
Introduction
1. Control Panel
2. Zoom Lever
3. Focus Ring
4. Lamp Cover
5. Lamp Cove Screw
6. Remote Sensor
7. Tilt-Adjustable Feet
8. Lens
9. Ventilation (inlet)
10. Ventilation (outlet)
Product Overview
Air Flow
1
2
8
9
7
6
9
10
10
5
3
4
8
English
Introduction
Connection Ports
1. VIDEO Connector
2. RGB OUT Connector
3. RGB IN Connector
4. RS232C Control Port
5. AC IN
6. KensingtonTM Lock
1 2
5
3
This projector has a Kensington Security System Connector on the back panel. Connect the
Kensington Security System cable as below.
Kensington Security System
4
6
For the detailed installation and use of
the Kensington Security System, refer
to the user’s guide included with the
Kensington Security System set. And
for further information, contact
http://www.kensington.com, the
internet homepage of the Kensington
company that deals with expensive
electronic equipment such as notebook
PCs or projectors.
The Kensington Security System is an
optional item.
English
9
English
Introduction
Control Panel
1POWER
Refer to the “Power On/Off the Pro-
jector” section on pages 16~17.
2 AUTO Automatically synchronize the
projector to the VGA(RGB) and Video
signal input sources.
3 OK Con rm your item selection.
4 MENU Press “MENU” to launch the on-
screen display (OSD) menu. To exit
OSD, press “MENU” again.
5 SOURCE Press “SOURCE” to select an input
signal.
6 Four Direction-
al Select Keys
Use or or or to select items
or make adjustments to your selec-
tion.
7 POWER LED Indicate the projector’s status.
8 TEMP LED Indicate the projector’s temperature
status.
9 LAMP LED Indicate the projector’s lamp status.
4
52
1
6
7 8 9
2
3
Indice
Altri manuali LG Proiettore
LG
LG PV150G Manuale utente
LG
LG CineBeam Laser 4K HU85LA Manuale utente
LG
LG HW350T Manuale utente
LG
LG DX535 Manuale utente
LG
LG RDJT50 1024X768 XGA Manuale utente
LG
LG CF181D Manuale utente
LG
LG CineBeam Al ThinQ HU810PW Manuale utente
LG
LG CineBeam HU915QB Manuale utente
LG
LG CineBeam PH550GV Manuale utente
LG
LG BX327 Manuale utente
