LG LP-XG22 Manuale utente
P/NO : 3828VA0281B(373-026F)
LP-XG22
LP-XG24
OWNER’S MANUAL
LG LCD PROJECTORLG LCD PROJECTOR
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the bottom of the set and
quote this information to your dealer when you
require service.
Model number :
Serial number :
LCD
PROJECTOR
LCD
PROJECTOR
Projection Lamp
Operating Condition
146
Specifications.
Model
LCD panel size
resolution
screen size
projecting distance
remote control distance
speaker system
horizontal / vertical ratio
zoom ratio
Video compatibility
Power
height
breadth
length
weight
LP-XG22/XG24
22.9mm(0.9 inches)
1024(Horizontal) x 768(Vertical)pixel
1.01~7.6m(40~300 inches)
1.64~16.35m(5.03~54.08 feet)
12m
1W
4:3(horizontal:vertical)
1:1.3
NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N
AC 110 - 240V~50/60Hz
98.5mm(including front foot)
238mm
329.5mm(including lens)
3.4kg
temperature lamp model
AJ-LA20
power consumption
150W
In operation : 32~95°F(0°C~35°C)
In storage and transit : -4~140°F(-20°C~60°C)
humidity
In operation : 20 ~ 80% relative humidity by dry hygrometer
Not in operation : 10 ~ 90% relative humidity by dry hygrometer
Warning
This is a class A product. In a
domestic environment this
product may cause radio
interference, in which case the
user may be required to take
adequate measures.
CONTENTS
INDEX
INTRO-
DUCTION
1Safety Instructions 3
Names of parts 7
INSTALLATION AND
COMPOSITION
2Installation Instructions 13
Composition 15
Turning on the Projector 17
Turning off the Projector 18
Operating the Projector 19
Selecting source mode 20
CONNECTIONBASIC FUN-
CTIONS
3
Function checking 29
Using Still function 30
4
Connecting to a Desktop PC 21
Connecting to a Notebook PC 22
Connecting to a Macintosh Desktop PC
23
Connecting to a Macintosh PowerBook
26
Connecting to a Video Source 27
Connecting to a D-TV Settop Box 28
SPECIAL
FUNCTIONS
5Selecting language 31
Checking lamp time 32
Using Blank function 33
Using Flip Horizontal / Vertical function
35
Selecting PC screen size input signal
37
POSI-
TIONING
6
Using Tracking function 41
TRACK-
ING
VIDEO
7
Using Resize function 38
Adjusting screen display 39
Adjusting Video 43
8
INFORMATION
9Supported Monitor Display 44
Maintenance 45
Specifications 46
2
Before operating the
unit, please read this
manual carefully.
3
Safety Instructions
GAlways keep the safety instructions to prevent any potential accident or misuse of the projector.
✶The meanings of symbols in the manual and the unit are as below.
G Take care of danger that may happen under specific condition.
G Take care of electric shock that may happen under specific condition.
G After reading this manual, keep it in the place that the user always can contact easily.
GSafety Instructions have two kinds of information, and each meaning of it is as below.
WARNING The violation of this instruction may cause serious injuries and even death.
NOTES The violation of this instruction may cause light injuries or damage of the projector.
WARNING
Do not attempt to repair or adjust this
equipment. Contact your dealer or Service
center. High risk of electric shock!
Don’t insert any object into the exhaust vent .
This may cause a fire or could give
an electric shock.
Earth wire should be connected.
- If the earth wire is not connected, there is possible a
danger of electric shock caused by the current leakage.
- If grounding methods are not possible, a separate cir-
cuit breaker should be employed and installed by a
qualified electrician.
- Do not connect ground
to telephone wires,
lightning rods or
gas pipe.
Short-circuit
breaker
Power
Do not place anything containing liquid on
top of the projector. High risk of Electric
Shock or damage to the projector.
This may cause a fire
or could give an
electric shock.
WARNING
Don’t remove any covers (except lens
cover). High risk of Electric Shock! Use an air spray or soft cloth that is wet
with a neutral detergent and water for
removing dust or stains on the projection
lens.
Only use the correct type of batteries for
the remote control. Dispose of used batter-
ies carefully.
This may cause a fire
or could give an
electric shock.
Don’t look directly onto the lens when the
projector is in use. Eye damage may occur!
Don’t use the projector in damp place such
as a bathroom or any place where it is like-
ly to get wet. Serious damage could occur
or risk of Electric Shock!
Don’t use the projector if there is smoke
or unusual smell from the projector.
Disconnect from the mains and contact
the service center. Risk of fire!
K
AC
POWER
Don’t clog the opening(absorption tube/ex-
haust pipe) of the projector.
It makes internal temperature increase and caus-
es a fire.
absorption tube exhaust pipe
Don’t look at laser beam directly as it may
cause eye damage.
4
INTRODUCTION
5
Safety Instructions
NOTES
Only use the projector on a level and sta-
ble surface.
It may fall down
or be upset.
Be sure to unplug when you don’t use
the projector for a long period or you are
absent.
Accumulated dust may
cause a fire,
electric shock from
deterioration,
or electric leakage.
No impact on the lens while moved. No contact while working, or right after the
lamp is off since the exhaust port and the
lamp lid generate heat.
Disconnect from the mains and remove all
connections before moving.
Damage of cords may cause
a fire or electric shock.
Never touch the power plug with wet hand.
It may cause electric shock.
Don’t use alcohol, benzene, or thinners to
clean any plastic parts of the projector.
Never use industrial chemicals or deter-
gents.
Ensure the power lead doesn’t trail across
any hot objects like a heater.
It may cause a fire
or electric shock.
NOTES
Don’t touch the lens of the projector. It may
cause damage of it. Don’t use any sharp tools on the projector
as this will damage the casing.
If the projector requires cleaning inside con-
tact the service centre. Accumulated dust
can cause mechanical failure.
Place the projector where people will not
trip or tread on the power lead.
Use the indicated type of power source on
the projector. If you are not sure of the type
of power available, consult your dealer or
customer service center.
Don’t place the projector or the remote
control on a heater or use in a heated car.
Don’t use the projector when the power
cord or the plug is damaged or the con-
necting part of wall socket is loose.
It may cause electric shock
or a fire.
K
AC
Contact your dealer for replacing a new
lamp.
6
INTRODUCTION
7
Names of parts
MENU
SOURCE
PATTERN
ENTER
VOL VOL
POWER
Computer Out
AC
Computer In
Mouse
Computer
Audio
K
Audio Video S-VideoR L/MONO
Main Body
Main Body
Rear Connecting Part
Rear Connecting Part
Rear remote
control sensor
Handle
Foot adjusting
button
Indicators
Front remote
control sensor
Horizontal
leveler
Focus ring Lens cover
Foot
Computer Audio
Computer Out
Computer In
Audio / Video
Kensington Security
System Connector
(Refer to page 16)
Rear remote control sensor
Mouse
S-Video
Zoom ring
Power button/Power standby indicator
Speaker
Control panel
*
The LCD projector is manufactured using high-precision technology. You may, however, see tiny black points
and/or bright points(red, blue, or green) that continuously appear on the LCD projector. This is a normal result
of the manufacturing process and does not indicate a malfunction.
Control Panel
Control Panel
MENU
SOURCE
PATTERN
ENTER
VOL VOL
POWER
POWER Button/
Power standby indicator
,Button
Selects menus and
items in the menus.
MENU Button
Selects or closes
menus.
SOURCE Button
Switches to PC, AV,
S-VIDEO mode.
VOLUME Button
Adjusts volume level and
functions of menus.
ENTER Button
Checks present mode and
saves the change of functions.
PATTERN Button
When pressing PATTERN
button, the screen display’s
the screen for focus adjust-
ment.
8
INTRODUCTION
9
Names of parts
Remote Control
Remote Control
Inserting the batteries
Inserting the batteries
POWER Button
SOURCE Button
L MOUSE Button
(Zoom-out Button)
MOUSE DRAG Button
BLANK Button
RESIZE Button
AUTO TRACKING Button
Slide the battery cover
in the direction of the
arrow to remove.
VOLUME Button
MENU Button
R MOUSE Button
(Zoom-in Button)
ENTER Button
LASER Button
POINTER Button
STILL Button
MUTE Button
ZOOM Button
1
Insert the batteries with
correct polarity.
2
Replace the battery
compartment cover to
the arrow direction.
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali LG Proiettore
LG
LG BX324 Manuale di installazione e funzionamento
LG
LG RD-JT30 Manuale utente
LG
LG HF85LG Manuale utente
LG
LG PG65U Manuale utente
LG
LG Minibeam Pro PF1500G Manuale utente
LG
LG BN315-JD Manuale utente
LG
LG CineBeam 4K HU70LS Manuale utente
LG
LG BN315-JD Manuale utente
LG
LG RL-JT10 Manuale utente
LG
LG Minibeam PH550 Manuale utente
LG
LG PH550G Manuale di istruzioni
LG
LG ProBeam GRF510N Manuale utente
LG
LG PF1000U Manuale utente
LG
LG RD-JT30 Manuale utente
LG
LG DX535 Manuale utente
LG
LG AF115 Manuale di istruzioni
LG
LG BX286 Manuale utente
LG
LG CineBeam HF65LG Manuale utente
LG
LG HX350T Manuale utente
LG
LG CineBeam Laser 4K HU85LA Manuale utente
