Life Span BOOM Manuale utente
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanonline.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
BOOM OWNER’S MANUAL
2
BOOM
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 10
6. OPERATION GUIDE WITH PROGRAM CHART 11
7. EXERCISE GUIDE 14
8. MAINTENANCE INSTRUCTIONS 16
9. EXPLODED DIAGRAM 21
10.PARTS LIST 22
11.WARRANTY 33
3
BOOM
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
Never allow children on or near the treadmill.
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long time running.
4
BOOM
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
This is high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.
5
BOOM
3. IMPORTANT OPERATING INSTRUCTIONS
Be sure to read the entire manual before operating your machine.
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.
6
BOOM
4. ASSEMBLY INSTRUCTIONS
PART LIST
No.
Item
Specification
Qty
No.
Item
Specification
No.
1
Main Frame
1
7
Wrench w/screw Driver
S=13、14、15
1
30
Computer Console
34
Safety Lock
1
12
Fixed Bolt
1
8
5# Socket head wrench
1
46
Cross-shaped Bolt
ST4.2*15
3
48
Arc gasket
6
2
7
BOOM
STEP 1:
STEP 2:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (1) onto level
ground
1. Erect the uprights according to the
diagram
2. Note: Please ensure that the wires in
both uprights connected well before
folding.
3. Be sure to hold the frame to prevent it
from falling down
8
BOOM
STEP 3:
1. Connecting the computer up wire (26)
with the outgoing line (A).
2. Insert the now connected write into the
pipe.
3. Use the wrench (7), cross-shaped bolt
ST4.2*15 (46) and Arc gasket (48) to
attach the computer assembly (30) onto
the handlebar assembly (3).
Note: Ensure the connection wire is
connected well.
9
BOOM
STEP 4:
1. Insert fixed bolt (12) through the base
frame and screw onto the main frame.
2. Place the safety key (34) on the
computer assembly (30).
3. Ensure all bolts are screwed in
correctly and tightened
10
BOOM
5. FOLDING INSTRUCTIONS
Unfolding:
Folding:
Whilst supporting the main frame with
one hand, insert the fixed bolt (12)
through the upright and screw it in.
Please ensure the machine is standing
on stable ground and the back of
machine is supported to prevent it from
toppling over.
Remove the fixed bolt (12). Hold A with
your hands and lift up the main frame
until there is approximately an 80
degree angle between the frame and
the floor
Indice
Altri manuali Life Span Tapis roulant
Life Span
Life Span TR7000iM Manuale utente
Life Span
Life Span Workplace DT-3 Manuale utente
Life Span
Life Span Flare Manuale utente
Life Span
Life Span BOLT M2 Manuale utente
Life Span
Life Span FORCE Manuale utente
Life Span
Life Span TR3000i Manuale utente
Life Span
Life Span Super Manuale utente
Life Span
Life Span RHYTHM Manuale utente
Life Span
Life Span MARATHON Manuale utente
Life Span
Life Span Premier Manuale utente
Life Span
Life Span Equilizer XL Manuale utente
Life Span
Life Span STYLE Manuale utente
Life Span
Life Span supreme Manuale utente
Life Span
Life Span PRIME Manuale utente
Life Span
Life Span TR5500iM Manuale utente
Life Span
Life Span 1.3 Manuale utente
Life Span
Life Span TR500 Manuale utente
Life Span
Life Span BALANCE Manuale utente
Life Span
Life Span Treadmill Manuale utente
Life Span
Life Span Relay Manuale utente
