29 Maggio 2018 Pg 1/12
Lightech Srl
Via Serenissima 11 - 31025 S. Lucia di Piave (TV)
Tel. +39 0438 453010/Fax +39 0438 655919
Part number: STEYA216 (crash pads kit for Yamaha R6 2017- )
Introduction
Thank you for purchasing a LighTech product.
Please read carefully the instructions contained in this manual and make sure to work safely before start
mounting the equipment.
For the assembly of the components LighTech recommends to refer to skilled personnel. LighTech
is not liable for operations carried out without proper training or knowledge, which could lead to
risky situations for You and other people.
It is recommended to work in an environment with good illumination conditions and proper spaces.
To ensure the safety of the working area keep away children and animals.
Make sure to use proper tools and equipment, in god shape.
LighTech is not liable for damaged products and/or property damages and personal injuries due to
an improper assembly.
General information
Make sure that the motorcycle is in a stable and safe position.
Make sure that it has no hot mechanical components (especially engine, exhaust pipe, brakes).
Otherwise, wait until they cool down before proceeding.
Use suitable clothing and do not wear rings, necklaces, large garments and hair down which could
be dangerous.
The product is designed and tested to be used with the motorcycle in original conditions, not with
reference to not original components from third parties.
This information material can be downloaded from the Website www.lightech.it - email:
Assembly
Before proceeding, please examine the drawing supplied in the packaging.
The information material includes an exploded view drawing with the codes required for spare part
order.
If not specifically mentioned, use standard tightening torques (UNI/ISO) appropriate to the screw
size.
Any motorcycle is subject to vibrations, therefore is necessary to use anti-vibration threadlocker
(weak) to avoid the loosening of the screws and their possible loss.
Before using the vehicle, check carefully the job done and the correct functionality of the installed
components.
