Lightronics FXLD120EW Manuale utente

Page 1 of 4

FXLD120EW LED FIXTURE

Version0.1 OWNERSMANUAL 05/18/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

FEATURES AND SPECIFICATIONS

LEDs: 120 Watt Array.

Color Temp.: 5500 deg. K

Beam Angle: 19º or 26º or 36º (50º Optional)

Control System: DMX512 + Stand Alone

DMX Channels: 2

DMX Connectors: 3 pin XLR

Power Input: 120VAC, 60Hz

Max. Power Consumption: 150 Watts

Body Material: High Impact Plastic

Body Color: Black or White

Reflector: Glass

Gel Frame and Size "B" Gobo Holder Included

Size: 23.9"L x 10.7"W x 11.1"H

Weight: 12 lbs

DESCRIPTION

The FXLD120EW is a LED ellipsoidal fixture suitable

for stage, disco, night club, and other artistic

applications. It has automatic stand alone control

modes and can operate via a DMX-512 external signal.

A mounting yoke enables the fixture to be operated in

various positions and orientation.

INSTALLATION

LOCATION

The FXLD120EW is rated IP20 and is intended for

INDOOR USE ONLY.

Locate the unit in a well ventilated area away from

moisture and heat. Maintain a minimum spacing of

20" between the unit and other objects. The maximum

ambient operating temperature is 45

C (113

F). Keep

the vent holes clear. Holes are provided on the yokes

to install a lighting bar pipe clamp. Use a safety cable

when hanging the fixture.

POWER CONNECTIONS

The FXLD120EW has a line cord for connection to a

120 VAC, 15 Amp, 60Hz, grounded service. Do not try

to power the unit from a dimmer pack.

The safety ground pin on the power cord must be used.

DMX CONNECTIONS

A system using DMX control should be connected as a

chain of devices. In other words the control signal

cable should proceed from the controller to the first

receiving device and then to others in a continuous

"daisy chain" fashion.

The FXLD120EW has a DMX IN and a DMX OUT

connector to be used to connect the chain. The control

cable should NOT be split into a multiple run star

arrangement with a cable running from the controller

directly to each receiving device.

DMX CONNECTOR PIN ASSIGNMENTS

There are two different connectors which can be used

for DMX control. They are both XLR type connectors.

Some units use 3 pin connectors. Others use 5 pin

connectors. The FXLD120EW receives a DMX signal

on the 3 pin MALE connector on the rear of the unit.

The 3 pin FEMALE connector is used to connect to the

next DMX device on the control chain.

If your console uses a 5 pin XLR connector you can

make up an adapter cable to accommodate this. The

table below shows the pin assignments for both 3 pin

and 5 pin XLR connectors.

DANGER

RISK OF ELECTRIC SHOCK

Page 2 of 4

FXLD120EW LED FIXTURE

Version0.1 OWNERSMANUAL 05/18/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

DMX TERMINATION

A DMX chain should be terminated at the last

receiving device on the chain. This is done by

installing a commonly available 1/4 Watt, 120 Ohm

resistor across the DATA - and DATA + wires at the

last device. If you have only a few fixtures very close

together and a very short run to the controller then you

may be able to operate without the terminator.

OPERATION

A power ON/OFF switch is located at the rear of the

unit. A control panel on the back of the unit is used to

set the operating options. It consists of an LED display

and four buttons

(ESC, ENTER, DOWN, and UP).

Use

and

DOWN

to scroll the available choices.

Push

ENTER

when you reach the option you want to

check or set. The current setting for the option will be

shown. Use

and

DOWN

to change the setting.

Push

ENTER

to invoke the new setting. Use

ESC

exit from the sub menus.

DMX OPERATION

Use the

A - - -

menu to set the unit DMX starting

address. The range is

r001 - r511.

NOTE

The current version of the FXLD120EW will not

respond to DMX addresses above 255 even though

the addressing menu allows selections up to 511.

The fixture uses two DMX channels allocated as

follows:

CHANNEL 1: Fixture Intensity (000 - 255)

CHANNEL 2: Strobe Control (000 - 255)

000 is Strobe OFF

DEMO MODE (dEnO)

The

DEMO

mode has 4 choices as follows:

SC00

External DMX control

SC01

Slow fade ON/OFF (stand alone operation)

SC02

Strobe effects (stand alone operation)

SC03

ON/OFF sequence (stand alone operation)

SC00 must be used when operating with an

external DMX controller.

If the unit was switched to another

DEMO

mode then it

must be returned to

SC00

and then a RESET (rESt)

must be done.

NAST MODE

This function is not currently supported.

RESET (rESt)

The reset function enables DMX operation after stand

alone operation.

Push

ENTER

when

rESt

is shown. The display will

show

OFF

. Push UP to execute the reset. The display

will revert to show the DMX starting address.

MAINTENANCE AND REPAIR

TROUBLESHOOTING

Check that you have power applied to the unit.

Check the DMX control cable.

Check the address settings of the unit and controller.

CLEANING

DISCONNECT THE POWER CORD BEFORE

HANDLING THE UNIT.

PIN # SIGNAL NAME

1 DMX COMMON

2 DMX DATA -

3 DMX DATA +

4 NOT USED

5 NOT USED

ESC UP

DOWN

ENTER

CONTROL PANEL

DANGER DO NOT OPEN UNIT

RISK OF ELECTRIC SHOCK

RISK OF FIRE

Page 3 of 4

FXLD120EW LED FIXTURE

Version0.1 OWNERSMANUAL 05/18/2013

www.lightronics.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

Do not use chemicals or solvents when cleaning the

fixture. A mild detergent can be used sparingly if

needed. Ensure that the unit is dry before re-u

se.

REPAIR

The only FXLD120EW user serviceable part is a 5 mm

x 20 mm externally accessible fuse on the rear panel.

DISCONNECT THE POWER CORD BEFORE

CHECKING OR REPLACING THE FUSE.

Replace fuse ONLY with 3.15 Amp, 250VAC, fast

acting fuse.

Internal service on the unit by other than Lightronics

authorized agents will void the warranty.

If service is required, contact the dealer from whom

you purchased the item, or contact the Lightronics,

Service Department, 509 Central Drive, Virginia

Beach, VA 23454. Tel: 757 486 3588.

PHOTOMETRIC CHARACTERISTICS

ILLUMINATION (LUX)

BEAM DIAMETER (METERS)

Distance From Fixture

Beam Angle 10 feet 20 feet 30 feet

19 deg -- 2500 1214

26 deg -- 1723 628

36 deg -- 1200 516

50 deg 2160 635 --

Distance From Fixture

Beam Angle 10 feet 20 feet 30 feet

19 deg -- 7 ft 11 ft

26 deg -- 10 ft 16 ft

36 deg -- 14 ft 20 ft

50 deg 10 ft 16 ft --

This product is warranted for a period of TWO YEARS from the date of purchase against

defects in materials and workmanship.

This warranty is subject to the following restrictions and conditions:

A) If service is required, you may be asked to provide proof of purchase from an

authorized Lightronics dealer.

B) This warranty is valid only for the original purchaser of the unit.

C) This warranty does not apply to damage resulting from abuse, misuse, accidents,

shipping, and repairs or modifications by anyone other than an authorized

Lightronics service representative.

D) This warranty is void if the serial number is removed, altered or defaced.

E) This warranty does not cover loss or damage, direct or indirect arising from the use or

inability to use this product.

F) Lightronics reserves the right to make any changes, modifications, or updates as

deemed appropriate by Lightronics to products returned for service. Such changes

may be made without prior notification to the user and without incurring any

responsibility or liability for modifications or changes to equipment previously

supplied. Lightronics is not responsible for supplying new equipment in accordance

with any earlier specifications.

G)This warranty is the only warranty either expressed, implied, or statutory, upon which

the equipment is purchased. No representatives, dealers or any of their agents are

authorized to make any warranties, guarantees, or representations other than

expressly stated herein.

H) This warranty does not cover the cost of shipping products to or from Lightronics for

service.

I) Lightronics Inc. reserves the right to make changes as deemed necessary to this

warranty without prior notification.

Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 20100211

WARRANT

Altri manuali Lightronics Apparecchio di illuminazione

Lightronics

Lightronics PAR4 Manuale utente

Lightronics

Lightronics FXLD1036C4O Manuale utente

Lightronics

Lightronics FXLD154WAI Manuale utente

Lightronics

Lightronics FXLD354WAI Manuale utente

Lightronics

Lightronics PROFILE SPOT575 Manuale utente

Lightronics

Lightronics FXLD618C2I Manuale utente

Lightronics

Lightronics FXLD100ECMY26B Manuale utente

Lightronics

Lightronics FXLE1232W Manuale utente

Lightronics

Lightronics FXLD312R3I Manuale utente

Lightronics

Lightronics FXLD127FR5I Manuale utente

Lightronics

Lightronics FXLD312R3I Manuale utente

Lightronics

Lightronics FXLD354WAO Manuale utente

Lightronics

Lightronics FXLD348R3I Manuale utente

Lightronics

Lightronics FXLD818FRP4I Manuale utente

Lightronics

Lightronics FXLD68FP2I Manuale utente

Lightronics

Lightronics FXLD818FRP4I Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente