Lindy 42449 Manuale utente

uick Installation Guide

1Before You Begin…

System Requirement:

●10 Base-T Ethernet or 100 Base-TX Fast Ethernet

●CD-ROM drive

●CPU: Intel Pentium II 266MHz or above

●Memory: 32MB (64MB recommended)

●VGA resolution: 800x600 or above

Package Contents:

●One SOHO Wireless Internet Camera

●This

Quick Installation Guide

●One External Antenna

●One Installation CD-ROM

●One Camera Stand

●One DC Power Adapter

●One RJ-45 Ethernet Cable

Note: If any item contained is damaged or missing, please contact

your local dealer immediately.

uick Installation Guide

2Hardware Installation

Attaching the Camera Stand

The Wireless Internet Camera comes with

a camera stand, which has a swivel ball

screw head that can be attached to the

camera’s screw hole on the top/bottom

panel. Attach the camera stand to the

camera and station it for your application.

Connecting the Power Supply

Connect the external power supply to the

DC power input connector located on the

camera’s rear panel, and then connect it

to your wall outlet. (

Tip: You can confirm

the power source is supplied from the

Power LED on the camera.

)

Installing the Antenna

Connect an Ethernet cable to the network

cable connector located on the camera’s

rear panel, and then connect it to the

network.

Connecting the Ethernet Cable

Connect an Ethernet cable to the network

cable connector located on the camera’s

rear panel, and then connect it to the

network.

uick Installation Guide

3Running the Setup Wizard

The Setup Wizard is a convenient tool that will guide you through the

installation of your camera easily and quickly. After connecting the

camera to your computer, you can install the Setup Wizard and

complete the configuration now.

1. Insert the Installation

CD-ROM into your CD-ROM

drive.

Click Install Wizard.

2. Click Next.

3. Click Yes.

uick Installation Guide

4. Click Next.

5. Click Finish.

To run the Setup Wizard,

click Start -> Programs

-> Setup Wizard.

uick Installation Guide

4Using the Setup Wizard

When you launch the Setup Wizard, the main window will appear as

shown, and the connected camera will be displayed in the list.

The components on the Setup Wizard:

Click Wizard to begin configuring the selected

camera.

Click Search allows you to search the connected

camera again.

Click Link to launch the web browser and view the

images.

Click About to show the general information of the

selected camera.

Click Exit to close the Setup Wizard.

Control buttons

The connected camera list

uick Installation Guide

Changing the Admin ID and Password

By default settings, the Admin ID and Password are blank. For

security purpose, you are recommended to change the Admin ID and

Password immediately.

Click Wizard. The dialog box as

shown appears, asking you to enter

the Admin ID and Password. Both

fields are “blank”.

Click

If required, select the Change

options and enter the new Admin ID

and Password.

Click

The settings of IP Address, Subnet

Mask and Default Gateway must

correspond with your camera and

networking settings. Please check

with your network administrator for

correct settings.

Click

The Connection Mode depends on

how your camera is connected to

your network. Click Infrastructure

for use with a router or Adhoc for

peer-to- peer. The Network

Name, Wireless Channel, and

Encryption Key MUST correspond

with your wireless network settings.

uick Installation Guide

This window displays the settings you

set up. For any change, click to

modify your settings. Otherwise,

click to save and apply the

settings.

The configuration is completed, and

you will return to the main window.

Click Link to launch the web browser

and view the images.

uick Installation Guide

5Tips

Software Information

Click About to show the

general information of the

selected camera.

Click V to return to the

main window.

Technical Support

For more information, please refer to the User’s Guide located on the

CD-ROM.

uick Installation Guide

1Avant de Commencer…

Système Requis:

●10 Base-T Ethernet ou 100 Base-TX Fast Ethernet

●Lecteur CD-ROM

●CPU: Intel Pentium II 266MHz ou supérieur

●Mémoire: 32MB (64MB recommandé)

●Résolution VGA: 800x600 ou supérieur

Contenu de l'Emballage:

●Une Caméra Internet Sans Fil SOHO

●Ce

Guide Rapide d'Installation

●Une Antenne Externe

●Une Installation CD-ROM

●Un Support de Caméra

●Un Adaptateur d'Alimentation DC

●Un Câble Ethernet RJ-45

Note: Au cas où l'un des éléments précités serait manquant ou

endommagé, veuillez contacter votre revendeur immédiatement.

uick Installation Guide

2Installation du Matériel

Fixer la Caméra au Support

La Caméra Internet MPEG-4 est fournie

avec un support, possédant une tête de

vis à bille orientable pouvant s'attacher au

trou prévu sur le haut/bas de la caméra.

Attacher le support à la caméra et

orienter selon votre utilisation.

Connecter l'Adaptateur

d'Alimentation

Connecter l'adaptateur d'alimentation

externe au connecteur d'alimentation DC

situé sur la face arrière de la caméra et

puis le connecter à la prise murale.

(

confirmer la bonne alimentation grâce au

voyant LED allumé sur la caméra.

)

Installer l'Antenne

Connecter une Antenne au connecteur

d'Antenne situé sur la face arrière de la

caméra et ensuite la connecter au réseau.

Connecter le câble Ethernet

Connecter un câble Ethernet au

connecteur de câble réseau situé sur la

face arrière de la caméra et puis la

connecter au réseau.

Indice

Lingue:

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente