Linksys Velop Plug-in WHW01P Manuale utente

User Guide

Velop Plug-in

Table of Contents

Product Overview___________________________________________________________________________________________3

Front____________________________________________________________________________________________________________3

Side/Back______________________________________________________________________________________________________4

A Velop Plug-in requires an existing Velop system __________________________________________________6

Set Up _________________________________________________________________________________________________________7

How to restore factory defaults__________________________________________________________________________8

Velop System Settings______________________________________________________________________________________8

Where to find more help ____________________________________________________________________________________9

Specifications______________________________________________________________________________________________ 10

Linksys Velop Plug-in______________________________________________________________________________________ 10

Environmental ______________________________________________________________________________________________ 10

Product Overview

Front

The light on the front of your node gives you information about the node’s operation.

Light description Status

Blue (blinking) Starting up

Wait for the node to finish starting up.

Purple Ready for setup

Open the Linksys app to complete setup.

Purple (binking) Setup in progress

Follow instructions in the app.

Blue Connected to internet

Node is online, everything is good.

Red No internet

Not online, check with your ISP for service interruptions.

Red (blinking) Out of range

Node isn’t in range of another node. Move it closer.

Yellow Weak connection

Your node is connected to the internet, but the signal is weak.

Move it closer to another node to improve the signal.

Side/Back

Reset button—Press and hold until the light on front of the node turns red, fades and flashes bright

red again to reset the node to its factory defaults.

Network of nodes

Every home is unique. Velop creates a modular mesh system of Wi-Fi nodes to provide wireless

coverage throughout your home. Whether you have one node, three nodes, or more, we'll help you get

them in the right spot - one at a time - for the best performance everywhere.

Velop Plug-in must be used with an existing Velop system and requires a Velop primary node

connected to your modem with an ethernet cable.

Sample multi-story home

Sample single-story home

Velop Plug-in is designed for indoor use. Do not use outdoors or other areas where

it might be affected by rain or other weather conditions.

A Velop Plug-in requires an existing Velop

system

Be sure your primary node is already set up before adding a plug-in.

Set Up

1. Open the Linksys app.

2. Log in

3. Find and tap "Set up a New Product" in

the main menu.

4. Select "Add Another Node" and follow

setup instructions.

How to restore factory defaults

You should never need to reset your Velop Plug-in to factory default settings—a very disruptive

process. A factory reset restores your Velop Plug-in to the state it was when you took it out of its box,

requiring you to go through the setup process again.

To reset your Velop Plug-in to factory defaults:

•With your node plugged in, use a press and hold the Reset button on the side. The light on

front of the node will turn red and fade in pulses. Do not release the button until the light goes

out and then turns bright red.

Velop System Settings

Using your Linksys app, you can view or change Velop system settings to make your Wi-Fi more

secure or to work better with a device or game. You can access settings from anywhere in the world if

you have an internet connection, but you can also access your Velop system directly from your home

network if you are not online. To view the Velop user guide, detailing how to use the Linksys app go to

linksys.com/support/Velop.

Help

Where to find more help

•Linksys.com/support/Velop

•Linksys app help (launch the app and click Help in the main navigation menu)

Note—Licenses and notices for third party software used in this product may be viewed on

http://support.linksys.com/en-us/license. Please contact http://support.linksys.com/en-

us/gplcodecenter for questions or GPL source code requests.

Specifications

Linksys Velop Plug-in

Model Name Velop Plug-in

Model Number WHW01P

Radio Frequency 2.4 GHz and 5 GHz

# of Antennas 3

Buttons Reset

Lights One, multicolored light for power and status

Security Features WPA2-Personal

Security Key Bits Up to 128-bit encryption

Environmental

Dimensions 3.05” x 2.1” x 4.7” (77.47 mm x 53.34 mm x 119.38 mm)

Unit Weight 0.57 lb (260 g)

Power Internal AC/DC power supply: 100-240V ~1A, 50/60 Hz

Certifications FCC, UL, Wi-Fi (IEEE 802.11a/b/g/n/ac), WPS

Operating Temp. 32° to 104° F (0 to 40° C)

Storage Temp. -4° to 140° F (-20 to 60° C)

Operating Humidity 10% to 80% relative humidity, non-condensing

Storage Humidity 5% to 90% non-condensing

Notes:

For regulatory, warranty, and safety information, go to Linksys.com/support/Velop.

Specifications are subject to change without notice.

Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can

vary, including lower wireless network capacity, data throughput rate, range and coverage.

Performance depends on many factors, conditions and variables, including distance from the access

point, volume of network traffic, building materials and construction, operating system used, mix of

wireless products used, interference and other adverse conditions.

Indice

Altri manuali Linksys Router di rete

Linksys

Linksys EA6500 Manuale utente

Linksys

Linksys MR2000 Series Manuale utente

Linksys

Linksys EG0801SK - EtherFast Network Starter Manuale utente

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Istruzioni operative originali

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Istruzioni operative originali

Linksys

Linksys WRT330N - Wireless-N Gigabit Gaming Router... Manuale utente

Linksys

Linksys Gigaclear SPNMX55 Manuale utente

Linksys

Linksys BEFSR11 - EtherFast Cable/DSL Router Manuale utente

Linksys

Linksys MAX-STREAM EA8100 V2 Manuale del proprietario

Linksys

Linksys RV082 Manuale operativo

Linksys

Linksys MAX-STREAM EA9250 Manuale utente

Linksys

Linksys Hydra 6 Manuale utente

Linksys

Linksys Smart Switch LGS3XX Manuale utente

Linksys

Linksys RVS4000 Manuale operativo

Linksys

Linksys BEFSR41 - EtherFast Cable/DSL Router Manuale operativo

Linksys

Linksys RV042 Manuale operativo

Linksys

Linksys SRW208P - Cisco Small Business Managed... Manuale operativo

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Istruzioni operative originali

Linksys

Linksys MX4300 Manuale del proprietario

Linksys

Linksys WET11 - Instant Wireless EN Bridge Network... Manuale utente

Linksys

Linksys HPRO200 Manuale utente

Linksys

Linksys SLM2008 Manuale operativo

Linksys

Linksys WET54Gv2 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza