Logik LAVSEN10 Manuale utente

5.8 GHz Wireless AV Sender
Instruction Manual
LAVSEN10
Logik_LAVSEN10_101130.indd 1 11/30/10 11:14 AM

Logik_LAVSEN10_101130.indd 2 11/30/10 11:14 AM

Contents
Unpacking��������������������������������������������������������������������������������� 4
Product Overview��������������������������������������������������������������������� 5
Transmitter �������������������������������������������������������������������������������������������������������������5
Receiver �������������������������������������������������������������������������������������������������������������������5
IR Remote Extender���������������������������������������������������������������������������������������������6
Getting the Best Reception ������������������������������������������������������������������������������7
Setting Up your AV Sender ������������������������������������������������������ 8
Connecting the Receiver�����������������������������������������������������������������������������������8
IR Remote Extender���������������������������������������������������������������������������������������������8
Connecting the Transmitter ��������������������������������������������������������������������������10
Hints and Tips ������������������������������������������������������������������������� 13
Specifications�������������������������������������������������������������������������� 14
Transmitter ����������������������������������������������������������������������������������������������������������14
Receiver ����������������������������������������������������������������������������������������������������������������15
Safety Warnings���������������������������������������������������������������������� 16
Logik_LAVSEN10_101130.indd 3 11/30/10 11:14 AM

GB-4
Thank you for purchasing your new Logik 5�8 GHz Wirless
AV Sender�
We recommend that you spend some time to read this manual in
order to fully understand how to install and operate it correctly�
Read all the safety warnings carefully before use and keep this
manual for future reference�
Unpacking
Remove all packaging from the unit� Retain the packaging� If you
dispose of it please do so according to local regulations�
The following items are included:
IR Remote extender x 1
(P�N� ST18IR=175U)
3�5mm to RCA cables x 2
(P�N� 363=00000164)
Receiver x 1
(P�N� VR58LOW=175U)
IR Remote extender cable x 1
(P�N� 851100=10121)
Instruction Manual
(P�N� 033000=15509-V2)
Power adapters x 2
(P�N� 307001=10206)
SCART OUT RCA Adapter
(for transmitter) x 1
(P�N� 149=00000114)
SCART IN RCA Adapter
(for receiver) x 1
(P�N� 149=00000113)
A/V OUT
A/ V INIR E XT.
Transmitter x 1
(P�N� VT58LOW=175U)
If items are missing or damaged, please contact
Partmaster (UK only)� Tel: 0844 800 3456 for assistance�
5.8 GHz Wirless AV Sender
Instruction Manual
LAVSEN10
Logik_LAVSEN10_101130.indd 4 11/30/10 11:14 AM

GB-5
Product Overview
Transmitter
1 2 3
1� Transmitter aerial
2� Power adapter socket
3� IR remote extender socket
4� A/V IN socket
5� Channel select / OFF switch
1� Power adapter socket
2� A/V OUT socket
3� Channel select / OFF switch
Receiver
A/V OUT
A/V INIR EXT.
1 2 3 4 5
Logik_LAVSEN10_101130.indd 5 11/30/10 11:14 AM

GB-6
1� Remote control sensor
2� Battery compartment
3� 1�5V AAA Batteries
IR Remote Extender
2 3
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or
battery leakage, which could cause personal injury or damage to
property�
• Install the batteries correctly by following the polarity (+ and –)
indications in the battery compartment�
• Use only the types of the batteries which are indicated in this
manual�
• Do not install new batteries with used ones and do not mix
different types of batteries�
• Do not dispose of the used batteries as domestic waste� Dispose of
them in accordance with local regulations�
1
rear side
Logik_LAVSEN10_101130.indd 6 11/30/10 11:14 AM

GB-7
Getting the Best Reception
1� This system is a wireless communication product� The
installation location should have no blockage to avoid
interfering with transmission and reception� The distance
between the transmitter and receiver should be greater than 5
metres to receive the best signal�
2� The transmitter and receiver in this system are for indoor use
only�
3� After installation, if the picture is not clear or the picture is
rolling, then the transmitter location may have exceeded the
effective transmission distance� Please move or change the
Transmitter location�
4� To reduce interference the AC adapter, which comes with this
system, should not be plugged into the same mains socket as
other appliances�
Logik_LAVSEN10_101130.indd 7 11/30/10 11:14 AM

GB-8
Setting Up your AV Sender
Connecting The Receiver (connect to 2nd TV (e�g� bedroom or kitchen)
1� Plug the supplies 3�5mm to RCA cable into the A/V OUT socket
on the receiver and then plug into the RCA socket on your TV
located in the receiving room�
*Optional: Alternatively you may use the supplied
SCART IN RCA adapter (Receiver)�
2� Connect one of the supplied power adapters to the power
adapter socket on the receiver and then plug the power adapter
into the mains socket�
IR Remote Extender
3� Open the battery compartment cover� Insert 2 AAA batteries
and then replace the cover�
4� Position the remote extender on top / in front of your TV or
any other location in the direct line of sight with your remote
controls� Use an adhesive pad to hold it in place when you are
happy with the position�
Please insert the batteries with the correct polarities�
Logik_LAVSEN10_101130.indd 8 11/30/10 11:14 AM

GB-9
A/V OUT
TV
TV
IR Remote
Extender
IR Remote Extender
Receiver
1
10
2
3
4
Receiver
Power
Adapter
3.5mm to
RCA Cable
SCART IN
RCA Adapter
TV
3.5mm to
RCA Cable
*Optional
IN
VIDEO AUDIO-L AUDIO-R
Bedroom
Logik_LAVSEN10_101130.indd 9 11/30/10 11:14 AM

GB-10
Connecting The Transmitter (main viewing room, e�g� sitting room)
5� Plug the supplied 3�5mm to RCA cable into the A/V IN socket on
the transmitter and then plug into the SCART output socket on
your AV source device (e�g� satellite receiver, VCR or DVD player)�
**Optional: Alternatively you may also use the supplied
SCART OUT RCA adapter (Transmitter)�
6� Plug the IR remote extender cable into the IR remote extender
socket on the transmitter�
7� Position the IR remote extender cable in front of the IR sensor
window of your AV source device (e�g� satellite receiver, VCR or
DVD player)�
8� Connect the remaining power adapter to the power adapter
socket on the transmitter and then plug the power adapter into
the mains socket�
9� Both the transmitter and receiver have a Channel Select / OFF
switch� Ensure that the same Channel / OFF switch on both the
transmitter and receiver are set to the same channel A, B, C�
10� Select an appropriate AV channel on the receiving TV� The TV
should now show whatever signal the transmitter is sending
and if the IR remote extender cable is properly positioned, you
will be able to control the AV source by pointing the correct
remote control at the IR remote extender on top / in front of
your TV�
Logik_LAVSEN10_101130.indd 10 11/30/10 11:14 AM
Indice
Altri manuali Logik Ricevitore
























