logika WL-ZTPWBPB-E011-01 Manuale utente
© 2019 Logika Limited
Smart IR Transmitter (Side Emitted)
WL-ZTPWBPB-E011-01
Product Manual
Version 1.0
1
Logika Limited
E
-Centre, Massey University, Gate 5, Oaklands Road
Albany, Auckland 0632, New Zealand
www.logika.nz
·support@logika.nz
Introduction
Thank you for choosing Logika. Please take a moment to carefully read through the manual to
ensure safe and proper installation and use.
•Before use, the product must be properly installed as described in this manual by a qualified
technician.
•The product should be used with the supplied accessories.
•Do not disassemble or modify the product.
•Logika is not responsible for any loss due to improper installation or use of this product.
•Please visit our official website at www.logika.nz for more information.
•You can also contact us at the following email address: support@logika.nz.
2
Device Layout
3
Features
•Communication Mode: IEEE 802.15.4 Zigbee.
•Allows smart control of appliances like TV/AC/Projector.
•Battery operated and easy to install.
•Supports time setting/linkage control/scene management.
•Can be linked to smart assistants such as Amazon Alexa to allow voice control.
Specifications
Communication Protocol IEEE 802.15.4 ZigBee
Antenna Type Internal Antenna
Power DC 3V
Battery Type CR2×1
Standby Current <2μA
Control Distance 5m
Control Angle 45°
Overall Dimension (Diameter × Thickness) 64x32 (mm)
Material & Colour PC+ABS, Black
Net Weight 52g
Installation Method Wall
Flame Retardant Rating UL94 V-2
Working Temperature -10°C to +45°C
Working Humidity <95%RH (Noncondensing)
Storage Temperature -20°C to+60°C
4
Installation Steps
Hardware Installation
The device is designed for ceiling/wall mounting but can also be used free standing on a flat surface.
1) Drill two holes in the wall or ceiling, insert the wall plugs and screw in the mounting plate for
the Smart IR Transmitter.
2) Open the battery cover on the Smart IR Transmitter, insert a CR2 battery and replace the
cover. You can now attach the IR Transmitter to the mounting plate and adjust the angle to
work with the intended device.
5
Adding the Device to the Smart Home Network
Use the Logika Smart Home app to add the device to the Smart Home system. Please refer to the
Logika Smart Mobile App user guide which will take you through the process of adding smart
devices to the system.
Refer to the information below to locate the device in the Device Add screen. Once selected, the app
will walk you through how to add the device to the system.
Device Category:
Controller
Device Name:
IR Transmitter (Side Emitted)
6
Device Functions
When the device is first powered on, it will normally automatically attempt to connect to the Zigbee
Smart Home network. The System Indicator light will flash as it’s searching for the network. If it
connects, the light will remain on for 2 seconds and then go out.
If this does not happen, you can manually connect via the mobile app and follow the instructions
below.
Join the Zigbee Network
Press the Multi-Function Button once (or 4 times in quick succession). The System Indicator light will
start flashing, signifying it’s searching for the network.
When it successfully connects, the System Indicator light will stay solid for 2 seconds then go out.
Quit the Zigbee Network
Long press the Multi-Function Button for 6 seconds. The System Indicator light will flash 4 times and
go out. The device has now been successfully removed from the network and been reset to the
factory defaults.
7
User Guide
It is assumed that you have successfully added the Smart IR Transmitter to the Smart Home
Network, using the mobile app.
1) Select the Smart IR Transmitter from the device list in the app.
2) Click Add Remote Controller and select the type of device you wish to add.
3) Enter the name for this device (i.e. LoungeTV) and tap Next Step.
4) You will now be presented with a screen with a set of buttons to program.
Note: If you selected a Custom remote, you will need to create each button yourself, by
tapping the +button and entering the name for that button.
5) To program the buttons:
a. Tap the button you wish to program.
b. Wait for the System Indicator to light up.
c. Aim the remote control towards the Smart IR Transmitter and press the relevant
physical button.
d. The System Indicator should flash and then go out. The button has now been
programmed.
e. Repeat these steps for all the buttons you wish to program.
6) Once done, tap the Done button on the to right. The Smart IR Transmitter is now set up and
can be selected from your Scenes and Housekeeping Tasks to offer complete control of your
device as part of your Smart Home system.
For instance, you can create a Scene called ‘Movie Mode’ which will turn off your lights and
switch on your TV to the relevant input. Add this as an Alexa Command and you can activate
this scene with a verbal command!
8
Troubleshooting
The device cannot be added to the Zigbee network.
The device may be registered to another network. In rare occasions this can happen if the device
was not removed from the test network at the factory.
Perform the Quit the Zigbee Network procedure mentioned in Device Functions section to clear this
setting. You should now be free to add the device to the local smart network.
The issue you are experiencing is not mentioned here.
Please contact us at support@logika.nz with your issue and we will do our utmost to help!
Indice
Altri manuali logika Trasmettitore
