Logon LPS1024G Manuale utente
LP
S
1
0
2
4
G
Po
E
Sw
itch
U
s
e
r
M
an
ua
l
Product Profile
PS1024G is 24 port gigabit PoE switch, auto detection and identification
IEEE802.3af standard PD device, then carry power to it. Therefore do not worry it
will destroy the private standard PoE or Non-PoE equipment.PS1024G is the best
choice for minitype commercial network because it economically use PoE
deployment wireless AP and IP camera. PS1024G can resolve the problem of
maintenance tedious, wireless coverage, terminal device powered, surveillance
project. Maximum save the cost.
Key Features
Support power over ethernet cable device for example wireless AP and IP
camera.
Support IEEE802.3af/at standard .
Data and power transmission distance 100m, it can be flexible installation for
wireless AP and surveillance project.
4.1Mbit Packet buffer size;
10K Bytes of packet length;
Adopted storage forward switch system.
Support the full port loaded with IEEE802.3af power supply;
Intelligentize power and minimum consumption，guarantee PD requirement.
With power supply circuit protection function and protection back-end device
safety
Automatically provide the adaptive device
PSE modular design can flexible select PoE mode, easy to install
Support IEEE802.1 Q VLAN and 4K VLANs
Support IEEE 802.3、IEEE802.3u、IEEE802.3x、IEEE802.3az standard;
Dynamic LED, Provide the tips of simple working state and troubleshooting
Specification
Network
Port
· 10/100/1000MbpsPoE RJ45 port（port 1～port24）
· 2 Gigabit SFP port（25 port-26 port）
Transfer
Pattern
Full wired-speed store-and-forward
Performan
ce
•Bandwidth：52Gbps (non-blocking）
•Network delay（100 to 1000M bps）：maximum 20 μs（
using 64 byte packet）
•Network delay（1000 to 1000M bps）：maximum 10 μs（
using 64 byte packet）
•MAC address capacity：8K
•Frames filter and transfer rate：
10M : 14,880pps/port
100M : 148809pps/port
1000M : 1488095pps/port
Network
protocol
and
standard
· IEEE 802.3ad,LACP;
· IEEE 802.3u,Fast Ethernet;
· IEEE 802.3ab,Gigabit Ethernet standard
· IEEE 802.3x,Full-duplex Ethernet data link layers;
· IEEE 802.3af/at ,Ethernet power supply POE standard ;
· IEEE 802.3az ,EEE ,Energy efficient Ethernet standard;
· IEEE 802.3z ,Gigabit Ethernet fiber-optic standards;
POE pin
1/2(+)，3/6(-);
LEDs
indicator
·Power、POE
· Link/ACT，1000M
•Total power：400W（All PoE port，port 1～port24）single
port max 30W
•Input power：400W;48V @ 8.3A DC output power;
（Each country use customized power plug）
Dimension
s
· Size（LxWxH）：440mm x 350 mm x 44 mm
· Weight：5.5 kg
Environme
nt
· Operating Temperature：0°~40°C（32°~104°F）
· Storage Temperature：-40℃~70℃（-104°~158°F）
· Working Humidity：10%~90%(Non-condensing)
· Storage Humidity：5%~90% (Non-condensing)
EMC
· CE Class B
· FCC Part 15，Class B
· VCCI Class B
· C-Tick
Certificatio
ns
· CE,ROHS,FCC
Warranty
· 1 year
Indicator Description
Indicator
Introductions
Normal State
Abnormal and Process
PWR
PWR
Indicators
Red Light ON
If red light off, pls check whether the
external power supply plug powered
normal and whether the power adaptor
connect correctly.
POE
POE
Indicators
Red Light ON
If red light off, pls check whether the
corresponding RJ45 access network
device and the network cable connect
correctly, whether the network cable
is accord with Cat.5 standard
(transmission distance max. 100
meter)、whether the network cable
and network device is damaged.
ACT/LINK
PD Device
Connection
Indication
Yellow Light
ON
If light off，pls check whether the
corresponding RJ45 access network
device and POE powered normal、
whether the network cable connect
correctly and network device is
damaged.
1000M
PD device
Traffic Status
Green Light
ON
If light off，pls check whether the
corresponding RJ45 access network
device and POE powered normal、
whether the network cable connect
correctly and network device is
damaged.
Application Suggestion
1. In order to safety，pls non-professionals don’t open the casing of product;
Pls be careful the risk of strong current and security protection when product is
carrying on power;
3.Pls select the right power adaptor provide power for PoE switch，before using pls
confirm if is it accord with the requirement of PoE switch;
4.Pls don’t use PoE switch under the humid environment，avoiding water go into
the product inside caused PoE switch breakdown.
5.Pls start the power after the circuit connected;
6.Pls don’t plug-in and plug-out the connection cable when product is carrying on
power;
7.Pls don’t use PoE switch under somewhere with more dust and EME;
8.Pls don’t put heavy product on PoE switch , in order to having an accident.;
9.According to the IEEE802.3AF/AT standard, pls use the Cat.5 or above，
transmission distance up to 100 m;
10.Pls don’t exceed the maximum output power of PoE switch when it connect
more than one PD device ;
11. Suggestion that PoE switch use for indoor，if you want to use for outdoor, pls
install waterproof box
Indice
