Longshine COBRA15 Manuale utente
Fanless True Flat High Performance
COBRA15
USER MANUAL
15”All-in-One True Flat Touch Screen POS System
Version: 1.0
Date: Dec 26, 2012
COBRA15
Version: 1.0
ii
About this Manual
Thank you for purchasing LONGSHINE COBRA15 All-in-One system. This terminal offers all the
enhanced features and is easy to connect to various optional devices for optimal performance.
This user manual describes how you can setup and connect your terminal.
Copyright
The information in this guide is subject to change without prior notice.© Copyright 2012
All rights reserved. This product and related documentation are protected by copyright and are
distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written
authorization of the manufacturer and its licensors, if any.
COBRA15
Version: 1.0
iii
Federal Communications Commission (FCC)
Declaration of Conformity
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesirable operation.
This equipment has been tested and found to comply within the limit of a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the interference receiving antenna.
Increase the distance of separation between the equipment and interference receiver.
Connect the equipment to a power outlet on a circuit different from that to which the
interference receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Use the included AC power cord so as not to interfere with radio and television reception.
If you use other cables, it may cause interference with radio and television reception.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING:
This is a equipment of Class A. This device could cause interferences in residential areas; in the case of interferences
it can be demand from the user to provide appropriate solutions for it.
WARNING:
The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with
FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
RoHS
COBRA15
Version: 1.0
iv
BEFORE YOU PROCEED
Read the safety notices and the User Manual carefully before using the product.
Keep the box and packaging in case the product needs to be shipped in the future.
Follow the product and warning label instructions.
For safety reasons, only qualified service personnel should open the terminal.
Any changes or modifications that do not follow the instructions in this manual will void
this product/s warranty.
! SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
Power Requirement:
This product is designed to operate on 110~240V AC 50/60Hz in Europe.
Never connect to any outlet or power supply having a different voltage or frequency.
! POWER SUPPLY SAFETY NOTICE
Disconnect this terminal from the AC outlet before cleaning. Use only a moistened cloth for
cleaning.
Check the voltage of the power source when connecting the equipment to the power
outlet. Make sure the voltage of the power outlet conforms within voltage range of the
terminal. Failure to comply may cause the electric shock or damage to the terminal. If you
are not sure of the electricity voltage that you are using, contact your local electricity
company.
To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
Do not overload electric power outlets to avoid fire or electric shocks.
Protect the power cord from being walked on or pinched particularly at plug.
If the equipment is not used for a long time, disconnect the equipment from the mains to
avoid damage.
Never allow liquid into ventilation openings. This could cause fire or electrical shock.
COBRA15
Version: 1.0
v
! OPERATING INSTRUCTIONS
Keep the User Manual for future reference.
Follow the product label instructions.
Lay this terminal Upside down on a stable safe surface when installing. Heavy objects
placed on the product can cause damage or obstruct proper ventilation.
If one of the following situations arises, notify a qualified service technician immediately:
a. The power cord or plug is damaged.
b. The terminal has been dropped and damaged.
c. The terminal does not function according to the user manual.
d. The terminal has obvious signs of damage.
Do not place the unit where with high humidity and dust. They can cause extensive
damage. Avoid places where unit is likely to be exposed to oily fumes and vapors.
Places exposed to direct sunlight, or near heating appliances can attain extremely high
temperatures, which may deform the cabinet, or can become a prime cause of damage.
The operating ambient temperature range is 0 ﾟC to 35 ﾟC F ( 41 ﾟF - 95 ﾟ), and humidity of
10% - 90%. When using the unit on the system rack, be sure to keep this ambient
temperature inside the range.
Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to
be generated.
When transporting this unit, make sure it is not likely to be subjected to impacts. They can
be a prime cause for damage.
COBRA15
Version: 1.0
vi
CONTENTS
1. Introduction ................................................................................................................................ 7
1.1 How to use this manual.............................................................................................. 7
1.2 A Visual tour of COBRA15........................................................................................... 8
1.2a What comes with COBRA15 ............................................................................ 12
1.2b Dimensions of COBRA15 and its optional peripherals ..................................... 15
1.3 Features of COBRA15 ............................................................................................... 17
1.4 IO Interface .............................................................................................................. 18
2. Hardware setup ......................................................................................................................... 19
2.1 Pre-installation notice .............................................................................................. 19
2.2 General information ................................................................................................. 20
2.2.1 COM port power voltage ............................................................................... 20
2.2.2 Cash drawer power voltage ........................................................................... 23
2.3 Hardware assembly .................................................................................................. 26
2.3.1 HDD + SSD ..................................................................................................... 26
2.3.2 Memory ........................................................................................................ 28
2.3.3 CF card .......................................................................................................... 34
2.4 Optional peripherals installation .............................................................................. 37
2.4.1 MSR + RFID .................................................................................................... 37
2.4.2 2-Line VFD customer display .......................................................................... 39
2.4.3 i-Button reader .............................................................................................. 42
2.4.4 ADDIMAT reader ........................................................................................... 45
2.4.5 Second 7” 4-Line LCD display / 7” LCD display / 10” LCD display .................... 48
2.4.6 15” second display......................................................................................... 52
2.4.7 Fingerprint reader ......................................................................................... 54
2.4.8 2D image scanner .......................................................................................... 57
2.4.9 Internal speaker ............................................................................................ 60
2.4.10 WiFi ............................................................................................................. 63
3. Service manual .......................................................................................................................... 67
3.1 Touch panel ..................................................................................................................... 67
3.2 LCD panel ........................................................................................................................ 69
3.3 Motherboard ................................................................................................................... 72
4. Specification .............................................................................................................................. 75
COBRA15
7 Version: 1.0
1. Introduction
Welcome
Thanks you for choosing LONGSHINE COBRA15. COBRA15 was designed to help enhancing your
business flexibility by offering a superior customer experience.
1.1 How to use this manual
This manual contains all the information needed for setting up a COBRA15. In addition, you can
also consult the manual for the instructions to assemble / to service the terminal and to install the
optional peripherals.
Introduction to COBRA15 and this user manual.
All necessary information for hardware setup.
Specifications of COBRA15 and configuration of the motherboard.
Information for troubleshooting COBRA15.
COBRA15
8 Version: 1.0
1.2 A Visual tour of COBRA15
Before you start, please take a few moments to become familiar with COBRA15 Terminal.
Item No Description
1 Touch screen
2 Removable Hard drive Extraction slot
3 POWER LED
4 Base / Stand
5 Optional devices
Elegant, Solid, Fashionable and Compact Design
1
2
3
4
5
COBRA15
9 Version: 1.0
Item No Description
6 Function cover
7 Optional VFD ,7” and 10” Secondary Display cover
8 MSR & RFID cover
9 Speaker holes (speaker Optional)
10 Switch cover
11 VESA hole cover for 15”Secondary Display
12 Cable cover
6 7
8
9 9
10
11 12
COBRA15
10 Version: 1.0
“Very Easy Maintenance”
Please follow the instructions to reach all inner components:
Step 1: Please position the terminal as shown below
on a working table with “soft protective pad”.
Step 2: Please remove cable cover by
sliding it downwards.
Push Push
Step 3: Please remove the circled six
screws.
Step 4: Please disconnect and remove all the
connected cables from IO interface and unscrew
the HDD screw.
Altri manuali per COBRA15
1
Indice
Altri manuali Longshine Terminale touch
Longshine
Longshine 15IW Series Manuale utente
Longshine
Longshine CRANE 1 Manuale utente
Longshine
Longshine POS GT-150 Series Manuale utente
Longshine
Longshine GFT-150 Series Manuale utente
Longshine
Longshine POS GFT-150 Series Manuale utente
Longshine
Longshine RDT-150F Series Manuale utente
Longshine
Longshine GFT-150 Series Manuale utente
Longshine
Longshine RCT150 Manuale utente
Longshine
Longshine COBRA15 Manuale utente
