LONGXING GP31-2P16D Manuale utente
1
Passive Optical Points Terminal Box -FTTH
Outdoor, 16 fibers
GP31-2P16D
Installation Manual
2
Features：
Mechanical seal: good sealing, can repeat use. Protective level:IP65.
Laying: outdoor wall-mounting and pole-mounting.
Product Features:
1. FTTH products ,passive optical points wiring special terminal box;
2. The box body to scroll type structure, it has the function of guard against theft, large capacity
function complete, easy to use;
3. Can meet the following Ф12 cable into, and can meet the figure 8 or Ф3 cable protective in
splice connection;
4. Can be installed 1:16 SC or 1:32 LC Mini-splitter;
5. LC biggest for 32core，SC biggest for 32 core
Basic Structure：
Part Name
No
Name
1
Base
2
Splice Tray
3
Adapter fixing panel
4
Fibre storage area
5
Strengthen the core fixed
press block
6
Stainless steel hose
7
Stainless steel hose
hoops(Fixing cable parts)
8
Sealing ring
9
Cover
10
Lock
11
Cable enter ports
12
Hasp
Operation Instruction:
1.Cable stripping
According to your drawings cable stripping will be good.
④.
cable
③.
②.
①
35mm
45mm
Fixing length of fiber cable
inside the terminal box
950mm length of fiber
with protective coat
the length of the
strengthen core
1500mm length of protective coat
of fiber cable to be stripped off
1080mm length of protective coat of
fiber to be stripped off
Drawing 2
Drawing 1
12
11
2
10
3
5
7
8
9
1
6
4
11
12
3
2、Cable fixing
Will stripping cable inserted into the hole good fiber optic cable, through the hose hoops and cable
strengthen core placed to strengthen the core press block press tightly, and then the cable fixed with stainless
steel hose hoops.
3、Optical fiber connection
According to the picture shows to pigtail or splitter (input) welding and welding after the
completion of the layout will be in accordance with pictures of optical fiber, pigtail,heat shrinkable protective
sleeve and splitter is put to the corresponding position and be fixed, take fiber with protective coat and pigtail
end with nylon tie fixed,the heat shrinkable protective sleeve useful rubber cover plate fixed, the splitter used
double-sided tape fixed, finally cover the transparent plate.
4、Pigtail/path cord
Flip in splice tray, with fixed screw will be fixed in the splice tray.
According to the picture shows will pigtail joint insert adapter, and will put the pigtail tray be fixed.
Will do the path cord or terminal box outlet joint through the fiber outlet hole, the path cord (outlet) joint
insert the adapter.
5、Fiber outlet holes sealing
Step1.Cut the Path cord(outlet) ring，will do the path cord (outlet) package closely；
Step2. Will do the path cord(outlet) sealing ring from the corresponding pressed into the slots, to the bottom;
Path cord (outlet)
Cable outlet ports
Strengthen the core
fixed press block
Stainless steel hose
hoops
Fiber
Rubber ring
Pigtail
Pigtail
Tie mounts
Strengthen the
core fixed press
block
Fiber with
protective coat Cable outlet ports
Heat shrinkable
protective sleeve
Fiber
Path cord(outlet)
4
6、Installation fixing
A.Wall-mounting installatin(standard configuration)
According to your drawings on the wall a crossed punch, and then will plastic expand into flush with
metope;
By tapping screws twist into plastic expand, to tapping screws tail and metope 4 mm distance;
Will do the base of lock hole big head the most standard of screw into, and down lock.
B.Pole-mounting(for customers chose)
Open the stainless steel hoop and wear into the terminal box base square hole, and then encircle the pole,
and finally screw up.
81.8
157.1
Plastic
expand
Tapping
screw
Tapping
screw
Plastic
expand
Wall Mount the
fixing hole
Pole
Terminal Box
Cable
Stainless steel hoop(for
customers chose)
Altri manuali LONGXING Terminale touch
