Lorex LNZ32P12 series Manuale utente

Instruction

Manual

LNZ32P12 12X

Network PTZ

Camera

Instruction Manual

LNZ32P12 12X Network PTZ

Camera

#LX400020; r. 1.0/16372/16530; en-US iii

Thank you for purchasing this product. is committed to providing our customers with a

high quality, reliable security solution.

This manual refers to the following models:

LNZ32P12

For the latest online manual, downloads and product updates, and to learn about our

complete line of accessory products, please visit our website at:

www.lorextechnology.com

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RICK OF ELECTRIC SHOCK DO NOT

REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

THE PLUG TO THE WIDE SLOT AND FULLY INSERT.

#LX400020; r. 1.0/16372/16530; en-US iv

Table of contents

1 Safety Instructions ..............................................................1

2 LNZ32P12 Features .............................................................2

3 Getting Started ...................................................................4

4 Connecting the Camera .......................................................5

4.1 Option 1: Connecting the Camera to an NVR ....................5

4.2 Connecting Cameras to the Local Area Network

(LAN) ...................................................................... 5

5 Installation ....................................................................... 10

5.1 Installation Tips and Warnings ..................................... 10

5.2 Installation (Indoor/Outdoor)........................................ 10

6 Controlling the PTZ Camera with an NVR.............................. 18

6.1 Controlling a PTZ Camera (Local NVR) ......................... 18

6.2 Advanced PTZ Controls ............................................. 19

6.2.1 Presets........................................................ 20

6.2.2 Tours........................................................... 21

6.2.3 Pattern......................................................... 22

6.2.4 Auto Scan .................................................... 22

7 Technical Specifications .................................................... 24

7.1 Dimensions ............................................................. 25

8 Troubleshooting................................................................ 26

9 Resetting the Camera ........................................................ 28

#LX400020; r. 1.0/16372/16530; en-US v

Safety Instructions

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity, and voltage levels

noted in the Technical Specifications.

• Camera is rated for outdoor use and is weatherproof when properly in-

stalled. Camera is not intended for submersion in water. Installation under

a sheltered environment is recommended.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of intense

light.

• Use only the supplied regulated power supply. Use of a non-regulated,

non-conforming power supply can damage this product and voids the

warranty.

• Make sure to install the camera in a location that can support the camera

weight. If mounting the camera on a drywall surface, you must drill at least

2 of the mounting screws through a wooden stud. See 5.2 Installation (In-

door/Outdoor), page 10 for complete installation instructions.

• Make sure there are no live electrical cables in the area where you plan to

mount the camera.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any-

thing other than water to clean the dome cover, as chemicals such as ace-

tone can permanently damage the plastic.

#LX400020; r. 1.0/16372/16530; en-US 1

LNZ32P12 Features

• High definition 1080p resolution 2.1 MP Sony Exmor® image sensor.

• Powerful 12X optical zoom and 16X digital zoom to focus in on even the fin-

est details.

• Full 360° continuous pan rotation for complete area coverage. Fast 300°

per second panning speed.

• Zoom lens for viewing small or distant objects with enhanced definition.

• Plug-and-play setup with a single network cable for video, power and PTZ

control (PoE+). 2

• Program preset viewing points, patterns, scan cycles and tours when con-

nected to an NVR.

• Remote control of the PTZ camera using a smartphone or tablet when con-

nected to an NVR.

• Day/Night mode: picture automatically switches to B&W delivering better

clarity in low light conditions.

• ClearNight imaging for superior low light performance. 3

• Infrared cut filter ensures accurate color representation.

• High definition video with outstanding detail, day or night.

• Weatherproof for outdoor & indoor installation (IP66 Rated). 4

• Wall mount bracket & 100ft extension cable included for installation

flexibility.

• Ceiling / wall mountable.

#LX400020; r. 1.0/16372/16530; en-US 2

LNZ32P12 Features2

Note

1. Compatible with LNR100 & LNR400 Series NVRs only.

2. This camera’s power consumption is rated for PoE+ (30W max., IEEE 802.3at) only.

To power the camera, you must use the included power adapter or a switch or NVR

that supports PoE+ (such as Lorex model ACCLPS241B, sold separately). Standard

PoE switches (15W max., IEEE 802.3af) will not provide sufficient power to operate

this camera.

3. This camera features an ultra-low light sensitive image sensor and therefore does not

feature Infra-Red LEDs. The camera requires ambient lighting (for example, street/

building lighting, star or moon light) to render a night time image. In total darkness

(zero Lux) the camera will not produce a night time image and therefore the camera

should not be installed in areas with complete darkness.

4. Not intended for submersion in water. Installation in a sheltered location

recommended.

#LX400020; r. 1.0/16372/16530; en-US 3

Getting Started

The system comes with the following components:

PTZ Camera Wall Mount Pendant Cap

100ft Ethernet

Extension Cable Power Adapter Mounting Screws

& Anchors

4x O-Rings 4x Allen Bolts Allen Key

Mounting Template Instruction Manual

#LX400020; r. 1.0/16372/16530; en-US 4

Connecting the Camera

Note

It is recommended to connect the camera to your NVR and test the PTZ controls before

permanent installation. For instructions on how to setup PTZ controls, see 6 Controlling

the PTZ Camera with an NVR, page 18.

4.1 Option 1: Connecting the Camera to an NVR

1. Connect the PoE+ connector on the camera cable to the included Ether-

net extension cable.

2. Connect the Ethernet extension cable to one of the PoE+ ports on the

back panel of your NVR.

Note

You can use up to a 300ft (91m) CAT5e Ethernet cable to connect the camera to your

NVR. The camera is compatible with LNR100 & LNR400 Series NVRs only.

4.2 Connecting Cameras to the Local Area Network (LAN)

For flexibility, you may also connect the camera to the same Local Area Net-

work (LAN) as the NVR. This is accomplished by connecting the camera to

the same router as the NVR. For these installations, an external PoE+ switch

(sold separately) or power adapter (included) must be used to provide power

to the camera. You also must add the camera on the NVR before it will show a

picture on the monitor or be recorded by the NVR.

What is PoE+?

PoE (Power over Ethernet) is a technology that allows Ethernet cables to carry

electrical power to connected devices. High-powered devices such as PTZ

cameras use PoE+ (also known as PoE class 4 or IEEE 802.3at), which pro-

vides more power to connected devices than standard PoE. Compatible

NVRs use integrated PoE+ ports to provide power and PTZ commands to the

camera, as well as video connection to the NVR. PoE+ ports will provide up to

#LX400020; r. 1.0/16372/16530; en-US 5

Connecting the Camera

30W to each connected device, whereas standard PoE (class 3) ports only

provide up to 15W. In order to use this PoE+ rated camera without the in-

cluded power adapter, you must connect it directly to a compatible NVR (

LNR100 & LNR400 Series only) or a PoE+ switch on the same network as the

NVR. PoE+ switches are available for purchase on www.lorextechnology.com

(model #: ACCLPS241B).

Complete the following steps to connect the camera to the NVR over the LAN.

Step 1 of 2 — Option A: Connecting the camera to your local network

using an optional PoE+ switch:

Router

NTERNET

PoE+ Switc h PTZ Ca m e ra

IP C a m e ra s

1. Connect an Ethernet cable of up to 300ft (91m) rated CAT5e or higher

(not included) from the LAN port on an external PoE+ switch (sold sepa-

rately on www.lorextechnology.com) to your router. Connect the power ca-

ble to the PoE+ switch and to a power outlet or surge protector.

Note

Terminology may vary depending on the model of PoE+ switch you have.

2. Connect the camera to the PoE+ switch using the included Ethernet cable

(or a CAT5e Ethernet cable of up to 300ft (91m)). The PoE+ switch will

provide power and video transmission the same way as your NVR.

#LX400020; r. 1.0/16372/16530; en-US 6

Altri manuali per LNZ32P12 series

Indice

Lingue:

Altri manuali Lorex Telecamera di sicurezza

Lorex

Lorex LNZ44P4 Series Manuale utente

Lorex

Lorex LIVE SD+ LW2730 Series Manuale di istruzioni

Lorex

Lorex DCP1000 Manuale utente

Lorex

Lorex CVC7993CL Manuale utente

Lorex

Lorex E851AD Series Manuale utente

Lorex

Lorex C861MB Series Manuale utente

Lorex

Lorex LWB4900 Series Manuale utente

Lorex

Lorex CVC6950PK4B Manuale utente

Lorex

Lorex LNE8950A SERIES Manuale utente

Lorex

Lorex VANTAGE SG7570 Series Manuale utente

Lorex

Lorex SG4934W Series Manuale utente

Lorex

Lorex CVC6994CL Manuale utente

Lorex

Lorex E892AB Series Manuale utente

Lorex

Lorex Vantage LNC116 Manuale utente

Lorex

Lorex lwu3624 Manuale utente

Lorex

Lorex SG7560B Manuale utente

Lorex

Lorex LNC254 series Manuale utente

Lorex

Lorex W462AQC Series Istruzioni operative

Lorex

Lorex SG6185W Manuale utente

Lorex

Lorex LNB8105X Series Manuale utente

Lorex

Lorex W261AS Series Manuale utente

Lorex

Lorex SG7555P Series Manuale utente

Lorex

Lorex LNB4173BW-4PK Manuale utente

Lorex

Lorex CVS1000 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente

Lumens

Lumens VC-A50PNW Manuale utente