Lorex SG19LD804-161 Guida all'installazione
Copyright ©2007 LOREX Technology Inc.
www.lorexcctv.com
19” LCD / 8 CHANNEL DVR
COMBO WITH 160GB HDD
& 4 CAMERAS
Overview - Remote
Viewing
MODEL:
SG19LD804-161
Remote Viewing Overview
2
Remote Viewing Overview
Setting up Remote Viewing ....................................................................... 3
What do you need? ..................................................................................................................... 3
Network Setup / Remote Access Overview ................................................................................. 3
19” System - IP & MAC Address ................................................................................................. 4
Web - Finding Your External IP Address ..................................................................................... 4
Network - Setting Up Your DDNS Account .................................................................................. 5
Network - Router Port Forwarding ...............................................................................................7
19” System - DDNS SETUP ........................................................................................................8
Lorex NetViewer Software - Connection Manager ...................................................................... 9
Lorex NetViewer Software - Remote Connection ...................................................................... 11
If you have any additional questions or technical issues, please contact the Sentinel CCTV Help
desk for further assistance at 1-888-425-6739 (Option 1 - 1) or mail your questions to
Setting up Remote Viewing
3
Setting up Remote Viewing
Setting up the Remote Viewing Feature requires several steps. Networking skills are required to
correctly configure the remote viewing functions.
What do you need?
• The 19” System.
• A PC with the installed NetViewer software (refer to the NetViewer Guide for installation
instructions)
• A Router (not provided with the system) and High Speed Cable or DSL Internet Connectivity
(for remote viewing outside your network)
Network Setup / Remote Access Overview
The SG19LD804-161 Observation System can be remotely controlled using your existing network
and the Lorex NetViewer software.
1. Connect the Observation System to the Router using the supplied Ethernet Cable. Power the
Observation System on. The Observation System must be connected to the router prior to
powering on the system. This allows the system to communicate on your network
2. Find the IP address of your Observation System through the Menu System on the unit.
3. Set up a web account at http://DDNS.strategicvista.net.
4. Enable PORT FORWARDING on your Router. Refer to the included Router Guide and Basics
of Remote Video Access Guide for further assistance with your specific network setup and
hardware.
5. Setup the Observation System DDNS.
6. Configure the software, using the information gathered on the following pages.
OBSERVATION SYSTEM
ROUTER
(Not Included)
PC
(Not Included)
INTERNET
Setting up Remote Viewing
4
19” System - IP & MAC
Address
The IP & MAC Addresses are
necessary for DDNS Setup (for remote
access to the Observation System).
To Locate the System information,
Press the ENTER button on the Front
Panel or Remote Control while viewing
the Cameras. The System Info window
will be displayed.
- OR -
1. Press the Menu Button on the Front
Panel or Remote Control to access the
Setup Menu. Select the System Setup
option and press the Enter button.
2. Navigate to the System Menu option.
Press the Enter button to access the
System Menu.
3. Navigate to the System Management
menu, and press the Enter Button to
access the settings.
4. Select the System Information option,
and press the Enter Button to display
the System Settings.
Web - Finding Your External IP Address
You will need to have your External IP address to set up your DDNS account. One of the fastest
ways to find this information is to use a 3rd Party website such as http://www.showmyip.com
Your IP address can also be found within your Router settings. Refer to your router user guide for
further details.
IP Address
MAC Address
IP Address
MAC Address
Setting up Remote Viewing
5
Network - Setting Up Your DDNS Account
Lorex offers a free DDNS service for use with your System. A DDNS account allows you to set up
a web site address that points back to your Local Network. The following outlines how to set up
your free DNS account.
1. Navigate to http://DDNS.strategicvista.net
2. Select the Create Account option from the list on the left side
of the screen.
3. Complete the Account Information fields with your personal information
4. Complete the System Information fields:
• Product License: Select your product model from the
Product License drop down menu
• <Product Code> - <MAC Address>: Locate the MAC
address of your (recorded while loading the System)
• URL Request: Choose a URL for your DDNS connection
(i.e. your name, your company or business name, or
anything of your choice.)
Setting up Remote Viewing
6
1. Click the Create New Account link at the bottom of the form to submit your request.
2. Your Account information will be sent to you at the E-mail Address you used in Step 3.
You will need this information for remote access to your System. Record YOUR information
below:
Service provider:
User Name:
Domain Name:
Password:
dns1.strategicvista.net
tomsmith1
tomsmith
(your password)
User Name:
________________________________________________________ *
Domain Name:
__________________________________________________________
Password:
__________________________________________________________
* Only the first part of the Domain Name is required for setup on the
SG19LD804-161 System. If the full Domain sent is tomsmith.strategicvis-
ta.net, the unit only requires that only tomsmith be entered.
Setting up Remote Viewing
7
Network - Router Port Forwarding
You will need to enable port forwarding on your Router to allow for external communications with
your Observation System for ports:
• TCP/IP PORT 6100
• WEB PORT 80
Computers, Observation Systems, and other devices inside your network can only communicate
directly with each other within the internal network. Computers and systems outside your network
cannot directly communicate with these devices. When a system on the internal network needs
to send or receive information from a system outside the network (i.e. from the Internet), the
information is sent to the Router.
When a computer on the Internet needs to send data to your internal network, it sends this data
to the external IP address of the Router. The Router then needs to decide where this data is to
be sent to. This is where setting up Port Forwarding becomes important.
Port Forwarding tells the router which device on the internal network to send the data to. When
you set up port forwarding on your Router, it takes the data from the external IP address:port
number and sends that data to an internal IP address:port number (i.e Router External IP
216.13.154.34:6100 to Observation System Internal IP 192.168.0.3:6100).
The instructions found online in the Router Configuration Guide will assist you in the port
forwarding configurations for a selection of different router models.
Visit our Consumer Guides Support website at http://www.lorexcctv.com for more details
Computer
Internal IP
192.168.0.2
Observation
System
Internal IP
192.168.0.3
Router
Internal IP
192.168.0.1
Router
External IP
216.13.154.34
NETWORK EXAMPLE
Internet Internal Network
Setting up Remote Viewing
8
19” System - DDNS SETUP
Once the DDNS settings have been
configured online, the information must be
entered on the Observation System to allow
for remote connection via the Lorex Client
Software (or through Internet Explorer):
1. Access the Main Menu Setup screens, and
navigate to the SYSTEM option. Press the
ENTER button to access the setup.
2. Navigate to the NETWORK option. Press
the Enter button to access the Network
settings. Select the DDNS Server option,
and press the ENTER button to enter the
DDNS SETUP.
3. Enter the information received in email
(including the password). Press the DDNS
Status first - wait for the SUCCESS
MESSAGE (as long as the information is
correct).
Select OK to save the settings.
NOTE: Once all Network settings are configured, the System can be accessed using
the Lorex Client Software. Refer to Page 8 for Connection Manager details.
Setting up Remote Viewing
9
Lorex NetViewer Software - Connection Manager
The Connection Manager contains the setup information to allow the user to remotely
connect to the Observation System.
Adding a Group
Group - Right click on
‘Site’ to add a New Group.
A group can represent
one or more Observation
Systems.
For Example, you may
have more than one
system in your office, so
would name your group
‘OFFICE’.
Each individual unit can
then be configured
separately for connection.
Enter a name for the
Group.
Setting up Remote Viewing
10
Adding a Site (Individual Unit Configuration)
DVR Information - Enter
the information specific to
the unit (refer to page 30
for setup instructions):
• Name - Enter a name for
the unit.
• IP / Domain Name -
Enter the IP address or
Domain Name for the
System. This will vary
depending on setup
(Internal Network
Connection or External
Remote access through
the Internet)- refer to page
30 for setup details.
• Port - Set to 6100 by
default.
• User ID - Enter the USER
ID to connect to the system
(the USER ID is configured
on the System - i.e. ADMIN
- case sensitive).
• Password - The
password used to access
the System (i.e. The
ADMIN password is set to
1234 by default).
Camera Assign - Set
each camera to a portion
of the 9-view window by
using the drop down
menu selections.
ADD Button - Adds the
site to the Group.
OK Button - Accepts the
changes and Closes the
configuration Window
Altri manuali per SG19LD804-161
4
Indice
Altri manuali Lorex Sistema di sicurezza
Lorex
Lorex LWB3800 Series Manuale di istruzioni
Lorex
Lorex SG14S1022P Manuale utente
Lorex
Lorex D861 Series Manuale utente
Lorex
Lorex LW2760 Series Manuale utente
Lorex
Lorex SG6876 Manuale
Lorex
Lorex LW1200 Series Manuale utente
Lorex
Lorex L21Q784 Manuale utente
Lorex
Lorex LW2101 series Manuale utente
Lorex
Lorex SG17F6584 Manuale utente
Lorex
Lorex LW2002BAC1 Manuale utente
Lorex
Lorex L15LD400 series Manuale utente
Lorex
Lorex LW2100 Series Manuale utente
Lorex
Lorex LHB800 Series Manuale utente
Lorex
Lorex LW292 SERIES Manuale utente
Lorex
Lorex LW2310 Series Manuale utente
Lorex
Lorex SG6231 Manuale utente
Lorex
Lorex QLR1660 Manuale utente
Lorex
Lorex HD14S1042-A Manuale utente
Lorex
Lorex LW491HD Manuale utente
Lorex
Lorex SILVANIA SY15F6584 Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente