Lorex SG21FD3044-161 Istruzioni per il montaggio

THE NETVIEWER

SOFTWARE APPLICATION

for SG21FD3044-161 Network

Installation

English Version 2.0

21” FLAT SCREEN CRT /

DVR OBSERVATION

SYSTEM WITH 4 NIGHT

VISION CAMERAS

MODEL:

SG21FD3044-161

www.lorexcctv.com

CONTENTS

1Introduction...........................................................................................................2

1.1 Netviewer Software Installation Requirements 2

2Install the Netviewer Application in your Computer..............................................3

3The Netviewer Main Screen.................................................................................6

4Configure the Netviewer for Network Viewing......................................................7

4.1 Network Configuration 7

4.2 Viewing the Cameras 8

5Netviewer Configuration.......................................................................................9

5.1 Netviewer Panel Description 9

5.2 Record Video Images Using the Netviewer 11

5.3 Change the Password for the Admin User ID or Guest 15

5.4 Remote DVR/Monitor Settings 16

5.5 HDD Settings for the DVR/Monitor 16

5.6 Setting the Priority Level for the DVR/Monitor 17

6APPENDIX A......................................................................................................18

6.1 Port Forwarding the Router 18

6.2 Register for the DDNS Service 18

- 2 -

1 Introduction

This manual describes the functionality of the Netviewer application software which is used to

access the DVR/Monitor from your computer over a local or remote network.

When installed on your computer, the Netviewer can perform the following functions:

•View live images from the DVR/Monitor

•Store, search, and review recorded video from the DVR/Monitor ’s HDD

•Change the date/time, record settings and properties

NOTE Before you are ready to view images from your computer, you need to have your

DVR/Monitor connected to your the LAN with the supplied Ethernet data cable

(Standard RJ-45).

1.1 NetViewer Software Installation Requirements

Minimum System Requirements:

Operating System: Windows 2000

Windows XP Home Edition / Windows XP Professional

Processor: Pentium 4 – 1.5 GHz Processor (or equivalent)

Memory: 256MB RAM

Hard Drive: 50 MB Installation space

* Additional Hard Drive space required for recording. Recorded file size

will vary depending on recording quality settings

Recommended System Requirements:

Operating System: Windows XP Home Edition

Windows XP Professional

Processor: Pentium 4 – 3 GHz Processor (or equivalent)

Memory: 1024 MB RAM

Hard Drive: 50 MB Installation space

* Additional Hard Drive space required for recording. Recorded file size

will vary depending on recording quality settings

- 3 -

2 Install the Netviewer Application in your Computer

Follow these steps to install the Netviewer application from the supplied CD.

1 Exit all applications currently running in the selected computer.

2 Insert the supplied Network Video Security Application software CD into the CD ROM

drive.

The CD automatically starts when the CD is inserted and opens to the first menu screen

(see Figure 1) when the CD is inserted.

Figure 1: Network Video Security Menu Screen

3 Click on the NETVIEWER button on the first menu screen to install the Netviewer

application.

The self running installation for the Netviewer application automatically starts when the

NETVIEWER button is pressed.

Figure 2: Startup Screen

4 To start the installation, press Next.

- 4 -

Figure 3: Customer Information

5 Enter your name and organization then press Next.

Figure 4: Destination Folder

6 Enter the desired folder for the installation, or press Next.

Figure 5: Installation

- 5 -

7 Press Install to start installing the program.

Figure 6: Installation Complete

8 Press the Finish button to end the installation process.

9 Find the Netviewer icon , located on your desktop (the installation process will

put 2 icons on your desktop), and click on it to run the program.

10 The NetViewer main window will appear on the screen as shown below.

- 6 -

3 The Netviewer Main Screen

Figure 7: The Netviewer Main Screen

SETUP BUTTON

CONNECT/

DISCONNECT

BUTTON

- 7 -

4 Configure the Netviewer for Network Viewing

The Netviewer allows you to access your DVR/Monitor from a computer in a networking

environment:

•Local Network Operation (Connected to a Computer on the Local

Network)

•Remote Network Operation (Connected to a Computer using the

internet)

To access the DVR/Monitor from a local or remote network requires you to configure your

Netviewer application:

•NETWORK CONFIGURATION (Page 7)

•VIEWING THE CAMERAS (Page 8)

4.1 Network Configuration

PROCEDURE

1 Click on the Setup icon , a SETUP window will appear.

2 Enter the setup information under the Login tab in the window to setup the cameras for

viewing.

a) IP

Local Network Viewing only: The IP entry is the IP Address of the

DVR/Monitor. The IP Address of the DVR/Monitor is available by

pressing the “ENTER” key on the remote control

Remote Network Viewing only: The IP entry is the Domain Name

provided when you register with the DDNS service (See APPENDIX A,

page 18).

NOTE If your DVR/Monitor is on a network behind a router then you need to forward

your router ports. If you set the port number to 5000 (the default) you need to forward 4

serial ports from the set port number (i.e.:5000, 5001, 5002, and 5003). See APPENDIX

A, page 18.

Enter the DVR/Monitor IP address (i.e. 192.168.1.5)

Enter the DVR/Monitor Port (i.e. 5000)

Set the User ID (i.e. admin, Max. 5 digit)

Set the video format (NTSC/PAL).

If you are logged on as Admin User, set the ID and Password

for Admin User and the password for the Guest.

/URL

- 8 -

b) Port: The DVR/Monitor port entry is 5000 (by default) for Local and

Remote Network viewing.

c) ID: The User ID entry is admin by default and cannot exceed a

maximum of 5 characters, lowercase.

d) VIDEO: Choose the NTSC format (North America).

3 Press OK to continue.

4.2 Viewing the Cameras

PROCEDURE

1 Click on the connect icon to connect to the DVR/Monitor for Network Viewing.

2 Enter the User ID and password. Note each cannot exceed 5 characters, lower case.

The default User ID is admin. The default password is admin.

Figure 8: Login Screen

3 Press OK

If the setup is properly done, the cameras will appear on the screen (see Figure 9, page 8).

Figure 9: Remote Camera Views

NOTE If your DVR/Monitor is behind a router, you need to open 4 ports on the router, related

to the main port.

For example: If you set up port 5000 on the Netviewer you need to open ports 5000,

5001, 5002 and 5003 in the router in order to connect remotely over the internet.

- 9 -

5 Netviewer Configuration

5.1 Netviewer Panel Description

Figure 10: Netviewer Panel

1 These controls are used to “PLAY, STOP, PAUSE, REW and FF” the recordings saved on

the HDD of the DVR/Monitor

When the PLAY button is pressed the most recent recorded data will be played regardless

of the search data set on the DVR/Monitor.

2 Select the display mode.

Available display modes are QUAD, FULL, PIP, POP. You can change the channel with

the right button of the mouse on each mode.

3 Change the NETVIEWER image screen to Full Screen Mode.

NOTE: To exit from Full Screen Mode, simply press the ESC button on the Computer’s

Keyboard.

4 This button is used to change the page when you are using the 2 PAGE 8 CHANNEL DVR.

5 The Setup button is used to set the appropriate values for the NETVIEWER.

6 Set the Brightness/Contrast/Hue/Saturation of each channel with this button.

1 2

10b

11 10a

Altri manuali per SG21FD3044-161

Indice

Altri manuali Lorex Sistema di sicurezza

Lorex

Lorex L14Q684C Manuale utente

Lorex

Lorex SG6331 Manuale utente

Lorex

Lorex SHS-2S7LD Series Manuale utente

Lorex

Lorex SGQ4160 Manuale utente

Lorex

Lorex WIRELESS HOME MONITORING SYSTEM Manuale utente

Lorex

Lorex SG17LD800 Manuale di istruzioni

Lorex

Lorex VANTAGE LH110 ECO SERIES Manuale utente

Lorex

Lorex SG6352 Manuale utente

Lorex

Lorex SG19LD80 Series Istruzioni operative

Lorex

Lorex SG6350 Manuale utente

Lorex

Lorex L154-81C4 Manuale utente

Lorex

Lorex SG19LD804-161 Guida all'installazione

Lorex

Lorex VANTAGE LH110 ECO SERIES Manuale utente

Lorex

Lorex SG14S1022P Manuale utente

Lorex

Lorex H32A Series Manuale utente

Lorex

Lorex SG6130 Manuale utente

Lorex

Lorex LW1000P Series Manuale utente

Lorex

Lorex SG21CD7444UQ-A80 Manuale utente

Lorex

Lorex SG4230 Manuale utente

Lorex

Lorex DMC2161 Manuale utente

Lorex

Lorex U222AA-Z Manuale di istruzioni

Lorex

Lorex L19LD800 Series Manuale utente

Lorex

Lorex LH120 Series Manuale utente

Lorex

Lorex LW2311 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente