LORGAR Voicer 721 Manuale utente

Dear customer!
Thank you for choosing our products.
www.lorgar.eu

● Frequency Response: 50Hz—18kHz
● Sensitivity: -40dB±3dB
● S/N Ratio: 70dB (A-weighted)
● Recording format: 48KHz / 16 bit
● Electrical Current: 75±5mA
● Nickel-plated diaphragm
● Plug and Play system
● Cardioid polar pattern
● Volume knob
● Mute button with LED indicator
● 360° Rotation & 180° Tilt
● 3,5 mm headphone jack
● Dimensions: 49 х154.6 х 56.1 mm.
● Compatible with Mac, Windows, Android and PlayStation
● Supports Discord, OBS, FL Studio, Skype etc
FEATURES:
PACKAGE CONTENT
Shock Mount
Microphone USB type C cable, 2 m Tripod Stand
EN
3/8" to 5/8" universal
pantograph adapter
Tripod mount
ring
Pop lter

EN
INTRODUCTION
This device is operating on the principle "Plug and Play". Please connect or
insert necessary device with correct port.
Please turn the volume down when plugging the
microphone into the USB port, and gradually increase
the volume to an ideal level.
Press the mute button to turn the mute
option on. The indicator will turn red.
Screw the mount to adjust the shock mount
angle 180° vertically and screw the metal
ring to adjust the microphone angle 360°
horizontally.
Make sure the front of the microphone
points towards your mouth.
Volume up:
Clockwise (Turn right)
Volume down:
Counter-clockwise (Turn left)
The indicator will be green
after plugging to the computer.

EN
Lorgar Voicer 721 includes a standard 1/8″
(3.5mm) headphone jack for monitoring
and playback
Problem Solution
A computer couldn`t
identify the USB devices
Please restart a computer and connect
the microphone to another USB port.
The microphone is
detected but no output of
the sound
Make sure that System Sound isn`t
mute and you haven`t set a microphone
volume to minimum.
PLUG & PLAY
TRIPOD MOUNTING MANUAL
Plug the USB cable into the USB port of your computer. Your computer will
automatically recognize the USB device and install a driver. The driver will
be installed automatically. If the microphone is not picking up sound, please
follow the instructions below:
① Unfold the folded tripod.
② Fasten the screw.
③ Adjust to a suitable height, and
then tighten screw.
④ Screw the 3/8" to 5/8" adapter on
top of tripod stand.
⑤ Screw shock mount on top of
adapter.
⑥ Loosen the screw and adjust the
angle, then fasten the screw.
⑦ Put the mic on the shock mount
⑧ Screw the metal nut to the buttom
of mic to x the mic on the shock
mount.
⑨ Screw the pop lter screw to x
to the tripod stand, then tighten the
screw. Adjust the pop lter position.
7
6
5
8
4
39
2
1

EN
Read carefully and follow all instructions before using this
product.
1. Do not expose the device to excessive moisture, water or
dust. Do not install in rooms with high humidity and dust level.
2. Do not expose the device to heat: do not place it close to heating
appliances, and do not expose it to direct sun rays.
3. Clean the device with dry cloth only.
SAFETY INSTRUCTIONS
The warranty period starts from the day of the product purchase from Lorgar
authorized Seller. The date of purchase is the date specied on your sales
receipt or on the waybill. During the warranty period, repair, replacement
or refund for the purchase shall be performed at the discretion of Lorgar. In
order to obtain warranty service, the goods must be returned to the Seller
at the place of purchase together with proof of purchase (receipt or bill of
lading). 2 years warranty from the date of purchase by the consumer. The
service life is 2 years. Additional information about the use and warranty is
available at https://lorgar.eu/warranty-terms/
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond
Court 4103 Ayios Athanasios
WARNING
It is forbidden to dismantle the device. Attempt to repair this device is not
recommended and leads to warranty waste.
WARRANTY
The microphone is
detected but no output of
the sound after updating
Windows 10
To let apps access the
microphone, please select
Settings>Privacy>Microphone, then
turn on Allow apps to access your
microphone.

Nosač za
amortizaciju
od udaraca
Mikrofon USB kabal tip C, 2 m Stativ
3/8" to 5/8" univerzalni
adapter za pantograf
Prsten za
postavljanje
na stativ
Pop lter
KARAKTERISTIKE:
BA
50Hz–18kHz
-40dB±3dB
70dB (A-ponderisano)
48KHz / 16 bit
75±5mA
a
sistem
sa LED indikatorom
& Nagib 180°
3,5 mm
49 х154.6 х 56.1 mm
sa Mac, Windows, Android i PlayStation
Discord, OBS, FL Studio, Skype itd

BA
UVOD
Ovaj uređaj radi na principu “Plug and Play”. Povežite ili uključite uređaj u
ispravan priključak.
Smanjite jačinu zvuka prilikom uključivanja mikrofona
u USB priključak i postepeno povećavajte jačinu zvuka
do idealnog nivoa.
Pritisnite tipku za Isključivanje zvuka kako
biste uključili opciju Isključivanje zvuka.
Indikator će postati crven.
Zavrnite nosač da biste podesili ugao
nosača udarca za 180° vertikalno a metalni
prsten zavrnite, kako bi prilagodili ugao
mikrofona, za 360° vodoravno.
Pazite da prednji dio mikrofona bude
usmjeren prema ustima.
U smjeru kazaljke na satu
(Okrenuti desno)
U suprotnom smjeru od kazaljke
na satu (Okrenuti lijevo)
Nakon priključenja na računar
indikator će biti zelen.

BA
Lorgar Voicer-721, priključak za slušalice
uključuje standard 1/8″ (3.5mm) za nadzor
i reprodukciju.
Problem
Računar ne prepoznaje
USB priključak
Molimo ponovo pokrenite računar i
uključite mikrofon u drugi USB priključak.
Mikrofon je identikovan,
ali nema zvuka.
Provjerite da System Sound nije isključen
i da niste podesili jačinu zvuka na
mikrofonu na minimum.
PLUG & PLAY
Uključite USB kabal u USB priključak na računaru. Računar će automatski
prepoznati novi USB uređaj i obaviti automatski instalaciju. Ako mikrofon ne
registruje zvuk molimo da pratite sljedeće instrukcije:
① Rasklopite sklopljeni stativ.
② Pričvrstite vijak.
③ Podesite na odgovarajuću visinu,
zatim pritegnite vijak.
④ Pričvrstite adapter 3/8" do 5/8" na
vrh stativa.
⑤Zavrnite amortizer na vrh
adaptera.
⑥Odvrnite vijak i podesite ugao,
zatim pričvrstite vijak.
⑦Stavite mikrofon na amortizer.
⑧ Pričvrstite metalnu maticu na dno
mikrofona, kako bi pričvrstili mikrofon
na držač.
⑨ Zavrnuti šaraf ltera za zaštitu
od buke kako bi se ksirao na stativ,
zatim stegnuti šaraf. Korigovati
poziciju ltera za zaštitu buke po
potrebi.
7
6
5
8
4
39
2
1

BA
Pažljivo pročitajte i pratite sve upute prije korištenja proizvoda.
1. Ne izlažite uređaj prekomjerenoj vlazi, vodi ili prašini. Nemojte
postavljati uređaj u prostorijama sa visokim stepenom vlage i
prašine.
2. Ne izlažite uređaj vrućini! Uređaj nemojte postavljati u blizini uređaja za
grijanje i direktnim sunčevim zrakama.
3. Uređaj možete čistiti samo sa suhom krpom.
Garancija na proizvod je dvije godine. Garantni period počinje od dana
kupovine proizvoda od ovlaštenog Lorgar prodavca. Datum kupovine je
datum naveden na računu. Tokom garancijskog perioda, popravka, zamjena
ili povrat novca izvršit će se prema uputama od strane Lorgar-a. Da bi se
pokrenuo postupak garancije, proizvod mora biti vraćen Prodavcu, zajedno
sa računom i garantnim listom. Dodatne infomacije o upotrebi i garanciji su
dostupne na https://lorgar.eu/warranty-terms/
Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court
4103 Ayios Athanasios
Zabranje je demontirati uređaj. Pokušaj popravke ovog uređaja se ne
preporučuje i dovodi do gubitka garancije
Mikrofon je detektovan,
ali nema zvuka nakon
ažuriranja Windows 10
sistema.
Da biste dopustili pristup aplikacijama,
molimo odaberite sljedeće
Settings>Privacy>Microphone, zatim
uključite Allow apps kako bi odobrili
pristup mikrofonu.

Стойка за
подвижен
монтаж
Микрофон USB type C кабел, 2 m Триножник
3/8" към 5/8" универсален
адаптер - пантограф
Пръстен за монтаж
на триножник
Pop lter
BG
50Hz – 8kHz
-40dB±3dB
70dB (A-weighted)
48KHz / 16 bit
75±5mA
система
полярен модел
с LED индикатор
& 180° ъгъл на наклон
жак за слушалки
49 х154.6 х 56.1 mm
Mac, Windows, Android и PlayStation
Discord, OBS, FL Studio, Skype и др.
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali LORGAR Microfono



















