SSG192 HIGH DEFINITION STUDIO SYNC GENERATOR
USER’S GUIDE
2
BEFORE YOU BEGIN
Notational Conventions in
this User Guide
Note Identifies information that needs extra
emphasis. Generally supplies extra information
to help you to better use the SSG192.
CAUTION Identifies information that, if
ignored, may cause damage to the SSG192
unit or other equipment in your system.
WA R N I N G Identifies information that, if
ignored, may be hazardous to your health or
that of others.
CAPS Controls, switches or other markings on
the chassis of the SSG192.
Operator Safety Instructions
• Read these instructions
• Keep these instructions
• Heed all warnings
• Follow all instructions
• Clean only with dry cloth
• Use only attachments and accessories
specified by the manufacturer.
• Unplug this apparatus during lightning
storms or when unused for long periods of
time.
• This apparatus shall not be exposed to
dripping or splashing and objects filled
with liquids, such as vases, shall not be
placed on the apparatus.
Mains Voltage. The unit comes from the fac-
tory configured for the voltage range applicable
to the locale it was shipped to. The Line Voltage
selector switch is located internally. Changing
its setting requires the services of competent
service personnel. When first connecting the
SSG192, ensure that the AC mains voltage in
your installation is within the range marked on
the rear of the unit.
There is no user accessible fuse.
Power Source. This product is intended to
operate from a power source that does not
apply more than 250 V rms between the power
supply conductors or between either power
supply conductor and ground. A protective
ground connection, by way of the grounding
conductor in the power cord, is essential for
safe operation.
Grounding. The chassis of this product is
grounded through the grounding conductor of
the IEC power cord. To avoid electric shock,
plug the power cord into a properly wired recep-
tacle before making any connections to the
product. A protective ground connection, by
way of the grounding conductor in the power
cord, is essential for safe operation. Do not
defeat the safety purpose of the grounding
plug. The three-pronged grounded plug is pro-
vided for your safety. When the provided plug
does not fit your outlet, consult an electrician for
replacement of the obsolete outlet.
Danger from Loss of Ground. If the protective
ground connection is lost, all accessible con-
ductive parts, including knobs and controls that
may appear to be insulated, can render an elec-
tric shock.
Proper Power Cord. Use only the power cord
and connector specified for the product and
your operating locale. Use only a cord that is in
good condition. Protect the power cord from
being walked on or pinched, particularly at the
plug, convenience receptacle, and the point
where the cord exits from the apparatus.
Internal Fuse. There is an internal fuse that is
considered not user replaceable. Should this
fuse open, the unit will not operate. If the fuse
opens, it is a sign of internal distress that simple
fuse replacement will not fix. Seek qualified ser-
vice for the unit.
Operating Location. Do not operate this
equipment under any of the following condi-
tions: explosive atmospheres, in wet locations,
in inclement weather, improper or unknown AC
mains voltage, or if improperly fused. Do not
install near any heat source such as radiators,
heat registers, stoves, or other apparatus
(including amplifiers) that produce heat. Unplug
this device during lightning storms or when
unused for long periods of time.
Stay Out of the Box. To avoid personal injury,
do not remove the product covers or panels. Do
not operate the product without the covers and
panels properly installed. Only use accessories
specified by the manufacturer. Clean only with
a dry cloth.
User Serviceable Parts. There are no user
serviceable parts inside the SSG192. In case of
failure, refer all servicing to the factory. Servic-
ing is required when the SSG192 has been
damaged in any way, such as when a power
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
Equipment Markings
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user of the presence of uninsulated “dan-
gerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute
a risk of electric shock to persons. The excla-
mation point within an equilateral triangle is
intended to alert the user of the presence of
important operating and maintenance instruc-
tions in this user guide.
CAUTION
To prevent electric shock, do not use the
polarized plug supplied with the unit with
any extension cord, receptacle, or other out-
let unless the prongs can be fully inserted.
AVIS: NE PAS OUVRIR
Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager.
SEE OWNERS MANUAL. VOIR CAHIER D’INSTRUCTIONS.
S’adresser a un reparateur compétent.
RISQUE DE CHOC ELECTRIQUE
o user serviceable parts inside. Refer servicing to qualified service personnel
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE
DO NOT OPEN
RISK OF ELECTRIC SHOCK
What Ships in the Box
The SSG192 unit
An IEC power cable
The Quick Start
Getting Help
If you have questions beyond the scope of this guide, contact our Technical Service Group
in any of the following ways:
TUSA customers 425-778-7728
Internationalcustomers01-425-778-7728
8:00 amto4:30 pmMondaythroughFriday,PacificTime
F425-778-7727
Etech@lucidaudio.com
W www.lucidaudio.com
