Lumex SmartPod Manuale utente
1
SmartPod
User Manual
2
General Safety Information
1. Keep the device and packaging materials out of reach of
infants and children.
2. Keep the power adapter and other contacts away from
water, Dry your hands before use, do not place objects
filled with liquids such as drinks, etc. on or near the device.
3. If your Power Fluctuates, Plug into a certified Surge
Protector
4. Keep your device away from all flames such as candles and
do not set them up in the vicinity of the device.
5. Keep the unit at least 4 inches (10 cm) away from other
objects.
Do not block ventilation on the unit, Keep away from
Newspapers tablecloths or curtains.
6. Relative Humidity should be at 25% ~ 80%, non-condensing.
7. The battery is integrated with the device. Do not dissemble or
modify. The battery should be replaced by an authorized
service center only.
8. Ensure that the ambient room temperature is within 40 -
95°F (35 - 35°C).
9. Under normal use the Projector may get Warm
10. Wait before use if the device has been moved from a cold
location into a warm location. Any condensation that has
formed may damage the device.
11. Handle the product with care. Avoid contact with sharp
objects. Keep device away from metallic objects.
12. Place the projector on a flat surface. Any collision or falling
is likely to damage the product.
13. Do not drop or disassemble the product it may void the
warranty. Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to an
3
authorized service center.
14. Only use the accessories supplied by the manufacturer.
15. Avoid looking directly into the projector’s
lens.
16. The device should not be used in a dusty environment. Dust
particles and other foreign Objects may damage the unit.
17. Only use the enclosed power adapter (see Technical Data).
18. Both the Product and the User’s Manual are subject to
change without notice
Package Contents
Please check if the following items are located in your packaging:
Projector
AC Adapter
Remote Control
USB Cable
Composite AV Cable
HDMI Cable (A to C)
QSG & User Manual
4
FCC Compliance Statement:
This device complies with Part 15 of the FCC
Rules. Operation is subjected to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection
against harmful interference in residential installations. This
equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference
to radio or television equipment reception, which can be
determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of
the following instructions:
- Reorient or relocate the receiving antenna.
- Move the equipment away from the receiver.
- Plug the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/television
technician for additional suggestions.
5
You are cautioned that any change or modifications to the
equipment not expressly approved by the party responsible for
compliance could void your authority to operate such equipment
Please dispose of this product properly, recycle all the
components.
Batteries and rechargeable batteries are not to be disposed in
your domestic waste! Please recycle them at your local recycling
point.
Together we can help to protect the environment.
6
Contents
Devices Overview.......................................................................... 7
Getting Started.............................................................................. 9
Charging the Product............................................................... 9
Projecting from an External Source .............................................. 9
AV ............................................................................................ 9
VGA (optional) ....................................................................... 10
HDMI...................................................................................... 11
Connecting micro-SD Card .......................................................... 11
Connecting USB Device.......................................................... 11
Connecting your PC (Used as USB Storage Device)................ 12
Using Headphones................................................................. 13
Power Bank Function............................................................. 13
Functions and Operations...................................................... 14
Main Menu ............................................................................ 12
Browser.................................................................................. 17
Settings .................................................................................. 17
Language & Input:....................................................................... 23
Please Note: ................................................................................ 23
Specifications .............................................................................. 24
7
Device Overview
Projector
1. DC IN (Power)
2. Headphone Jack
3. AV Jack
4. HDMI Port
5. Micro-USB Port
6. Power Switch
A) Slide and hold for
about 3 seconds to
turn on the device,
Slide and hold for
about 3s to turn off
the device.
B) Slide for about 1s
to enter standby
mode, slide again for
about 1 second to
resume.
C) To turn on the
Power Bank function
(While the Projector
is off) Slide the Power
Switch for about 1s.
7. LED Battery Status
Monitor
8. Reset Button
9. Focus Wheel
10. Menu Button
11. Home Button
12. Return Button
13. USB Port
14. LED Power Bank
Indicator
15. Micro-SD Card Slot
16. Touchpad (Mouse)
8
Remote Control
1. Power
2. Menu
3. Home
4. Search
5. Navigation Buttons
6. OK
7. Previous
8. Return
9. Play / Pause
10. Next
11. Volume Buttons
Warning:
Improper use of the battery may cause
overheating, explosion or ignition, which can
result in injury or a fire. Battery leakage may
damage the infrared remote control.
Do not expose the remote control to direct
sunlight.
Do not recharge, dissemble, deform or heat
the battery.
Do not expose the battery to fire or water.
Immediately replace an exhausted battery.
Take out the battery when the remote will
not be in use for a long period.
Note:
When using the remote control for its first time, remove the
transparent plastic battery tab.
9
Getting Started
Charging the Product
It is recommended to fully charge your Projector before powering
it on for the first time.
Battery Status Monitor
While charging your Projector the LED Power indicator will turn
red, the Power indicator will shut off automatically when the
battery is fully charged.
Projecting from External Source
AV IN
1. Plug in the included AV cable into your Projectors AV
source then Plug your RCA cable (matching the colors) to
the AV cable in your Projector Plug the RCA cable to your
external media Player.
2. Enter “Source” on the main menu and select “AV” mode.
10
VGA (optional)
While this device can connect to a VGA Port We do not include
the cable in the supplied accessories, this cable is available for
purchase wherever our Projectors are being sold and our Retail
Website, Search Lumex CBV01473.
1. Plug one end of into the HDMI port on your projector.
2. Plug the other end of the cable into the VGA Port on your
Pc. (and the audio into the audio jack on your computer)
3. In the main menu “tap”“Source” and select “VGA” mode.
Note:
1. Make sure the screen refresh frequency of your computer
is 60Hz.
2. Supported screen resolution of PC:
-1920 x 1080 / 1600 x 1200 / 1280 x 1024
-1280 x 960 / 1280 x 720 / 1152 x 864
-1024 x 768 / 800 x 600 / 640 x 480
3. Some laptop computers do not automatically switch to
projection mode when your projector is connected. Please
refer to your computers manual to make correct settings.
Indice
Altri manuali Lumex Proiettore
