Luminate LEAP-10 Manuale
Access Point
Hardware Installation Guide
www.luminatewireless.com
Luminate Wireless.
20883 Stevens Creek Blvd, Suite 100 Part Number: LEAP-10-B01-B07
Cupertino, CA 95014 Published: June 2016
Copyright
© 2016 Luminate Wireless.
Luminate Wireless Access Point Installation Guide
Contents
Chapter 1 Overview......................................................................................................5
Package Contents ................................................................................................................5
Audience.............................................................................................................................. 5
Assumptions......................................................................................................................... 5
Icons..................................................................................................................................... 5
Typographic Conventions.................................................................................................... 6
Contacting Luminate............................................................................................................ 6
Chapter 2 Hardware Overview .....................................................................................7
LEDs..................................................................................................................................... 7
DC Power Socket .................................................................................................................9
Kensington Lock Slot ...........................................................................................................9
Ethernet Ports .................................................................................................................... 10
Console Port ...................................................................................................................... 10
Chapter 3 Before You Begin.......................................................................................11
Pre-Installation Network Requirements.............................................................................. 11
AP Pre-Installation Checklist .............................................................................................. 11
Summary of the Installation Process .................................................................................. 12
Identifying Specific Installation Locations.......................................................................... 12
Identifying RF Absorbers/Reflectors/Interference Sources......................................... 12
Chapter 4 Installing the Access Point .........................................................................13
Installing the Access Point ................................................................................................. 13
Using the Ceiling Tile Rail Adapter.................................................................................... 13
Confirming Power Connection........................................................................................... 15
Configuring the Access Point............................................................................................. 15
Chapter 5 Specifications, Safety, and Compliance.....................................................16
Product Specifications .......................................................................................................16
Electrical .................................................................................................................... 16
Environmental.............................................................................................................16
FCC....................................................................................................................................17
FCC Class B Part 15 ...........................................................................................................17
EU Regulatory Model Numbers.........................................................................................18
Medical ..............................................................................................................................18
Proper Disposal..................................................................................................................18
Appendix A Appendix I: Using the Installation Template .............................................19
Luminate Wireless Access Point Installation Guide
1
Overview
Luminate’s Enterprise Access Point (LEAP) is a new generation of services-ready LTE access points that is
cloud activated for rapid deployment by enterprise. Each LEAP is connected to the Enterprise LAN using
standard Cat.5 UTP cable and is powered by 802.3at Power-over-Ethernet. This cloud activated service
significantly reduces deployment time by automating device provisioning and firmware upgrades. With
Luminate cloud activation, LEAPs are factory shipped to any site, and configure themselves when powered up.
Package Contents
The following is shipped with the Luminate Wireless Access Point:
zLEAP-10 access point
z9/16" and 15/16" Ceiling Rail Adapters
zInstallation guide
Audience
This guide is intended for system administrators and personnel responsible for installing the Luminate Wireless Access
Point.
Assumptions
This guide assumes administrators have a good understanding of networking and communication technologies.
Icons
The following icons are used in this guide:
Notes indicate helpful hints, or useful bits of information providing the reason for an action.
Cautions indicate something that might cause damage to or destroy your equipment, or result in a loss of data.
6 | Typographic Conventions Luminate Wireless Access Point Installation Guide
Typographic Conventions
The following typographic conventions are used in this guide:
zImportant terms and the titles of books are indicated with italic text.
zNavigation items, such as dropdown menus, buttons, or windows, are indicated with bold text.
zCommand syntax, examples, show output, and terminal displays are indicated with the Courier font.
Contacting Luminate
Warnings indicate something that might cause injury to you or someone else.
Luminate Wireless Access Point Installation Guide
2
Hardware Overview
The following sections outline the hardware features of the Luminate Wireless Access Point. This chapter covers:
“LEDs” on page9
“DC Power Socket” on page11
“Kensington Lock Slot” on page11
“Ethernet Ports” on page12
“Console Port” on page12
LEDs
The Luminate Wireless AP is equipped with five LEDs that indicate the status of the various components of
the AP. The LEDs by default operate in quiet mode. Turn off approximately five minutes after the AP is
powered on.
Figure 1 LED
Table 1 LEDs
LED Status Definition
Power On - Green
Red
Off*
Device Powered
Initial Power up
No Power up
8 | LEDs Luminate Wireless Access Point Installation Guide
* All LEDs turn off after approximately five minutes after device power up.
Figure 2 Bottom Panel
ENET 0 Off*
On - Amber
On - Green
Flashing - Amber/Green
No Link
100Mbs Link
1000Mbps Link
Activity
ENET 1 Off*
On - Amber
On - Green
Flashing - Amber/Green
No Link
100Mbs Link
1000Mbps Link
Activity
Radio 0 Off*
On
Radio Disabled
GreenRadio Enabled
Radio 1 Off*
On
Radio Disabled
GreenRadio Enabled
Table 1 (Continued)LEDs
LED Status Definition
Power
Kensington
Lock
Ethernet
1 and 0 USB
Console
ENET 0 connection is currently supported. Failure to connect to ENET 0 results in a failed connection to the AP.
Luminate Wireless Access Point Installation Guide
DC Power Socket
An AC-to-DC adapter (or any DC source) can be used to power this device. It must comply with all applicable local
regulatory requirements and the DC interface must meet the following specifications:
z48 VDC (+/- 5%), 1.25 A
zCenter-positive 2/5.6 mm circular plug, 10 mm length
Kensington Lock Slot
The Luminate Wireless AP is equipped with a Kensington slot for additional security.
10 | Ethernet Ports Luminate Wireless Access Point Installation Guide
Ethernet Ports
The Luminate Wireless AP is equipped with two 100/1000Base-T (RJ-45) auto-sensing, MDI/ MDX wired-
network connectivity ports. These ports require IEEE 802.3at Power over Ethernet (PoE+) compliance,
accepting 57 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment
(PSE) such as a PoE+ midspan injector, or network infrastructure that supports PoE+.
Figure 3 Gigabit Ethernet Port Pin-Out
Console Port
The serial console port allows you to connect the AP to a serial terminal or a laptop for direct local management. This port
is micro-AB USB. Connect it directly to the USB connector of a laptop using a standard Type A to micro Type A or Type
B cable.
1
2
3
4
5
6
7
8
BI_DC+
BI_DC-
BI_DD+
BI_DD-
BI_DA+
BI_DA-
BI_DB+
BI_DB-
1000Base-T Gigabit
Ethernet Port
RJ-45 Female
Pin-Out
Signal Name Function
Bi-directional pair +C, POE Positive
Bi-directional pair -C, POE Positive
Bi-directional pair +D, POE Negative
Bi-directional pair -D, POE Negative
Bi-directional pair +A, POE Negative
Bi-directional pair -A, POE Negative
Bi-directional pair +B, POE Positive
Bi-directional pair -B, POE Positive
Luminate Wireless Access Point Installation Guide
3
Before You Begin
The following sections detail all the necessary steps to take before installing the Luminate Wireless Access Point. This
chapter covers:
“Pre-Installation Network Requirements” on page11
“AP Pre-Installation Checklist” on page11
“Summary of the Installation Process” on page12
“Identifying Specific Installation Locations” on page12
Pre-Installation Network Requirements
Once appropriate products and their placement have been determined, the LMCCs must be installed and the initial setup
must be performed before the APs are deployed.
AP Pre-Installation Checklist
Before installing your Luminate Wireless AP, ensure that you have completed the following:
zEstimated and procured appropriate number of APs for your installation.
zProcured an Installation ID for your project.
zCAT5e or CAT6 UTP cable of required length.
zIEEE 802.3at compliant Power over Ethernet (PoE+) source. PoE+ source can be any power source equipment (PSE),
midspan PSE device, or a suitable AC to DC 48VDC adapter.
zThe following Network services are available on the local LAN:
zDHCP
zDNS
zNetwork Connectivity
zExternal Internet
Only ENET 0 is supported. Pay close attention during AP installation to ensure that only ENET 0 is connected to
the network.
Indice
