Lutron Electronics LHD0-96W24V-U UL Manuale utente

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 1 06.01.21

The

HomeWorks digital 0.1% constant voltage controller

is a high‑performance LED controller capable of

controlling up to 96 W of 24 V- constant voltage

loads. This controller provides smooth and continuous

dimming down to 0.1% low‑end. It is ideal for use with

strip lighting in applications such as coves, under or

over cabinet lighting and pathway lighting.

The controller is UL®Listed with an integrated wiring

compartment and can be mounted up to 150 ft (45 m)

away from the load.

Features

• Continuous, ﬂicker‑free dimming from 100% to 0.1%

• Soft‑on, Fade‑to‑Black operation for HomeWorks

digital: fades smoothly between 0% and 0.1% when

turned on and off for an incandescent like experience.

• UL®Listed for United States and Canada (cULus®).

• Field Adjustment Knob offers customer low‑end light

output tuning for better ﬁxture‑to‑ﬁxture matching.

• Guaranteed dimming performance when used with

Lutron controls:

– HomeWorks digital module

– Lutron 3‑wire controls and interfaces.

• Protected from miswires of input power, up to 277 V~,

to HomeWorks digital control inputs...

• Rated lifetime of 50,000 hours at 40 °C (104 °F)

ambient temperature and maximum loading.

• FCC Part 15

– Class A (277 V~)

– Class B (120 V~)

• Inrush limiting allows full loading of circuit breakers

without nuisance tripping.

• 100% end‑of‑line performance tested at a

Lutron factory.

1Light output at 0.1% depends on installation and light engine efﬁcacy.

2Soft‑on, Fade‑to‑Black dimming technology is not available for 3‑wire controls.

HomeWorks Digital 0.1% 3-wire Constant

Voltage 24 V-LED Controller with Soft-on,

Fade-to-Black

• RoHS compliant.

• Restores all settings after power failure.

• Barrier provided for Class 2 separation in the wiring

compartment.

• Redundant connections on line and control terminals

for easy daisy chain wiring.

• Redundant connections on output terminals allow for

easy wiring of two LED load home runs.

• Class 2 output designed to withstand hot swap.

• For more information please visit: www.lutron.com

HomeWorks Digital 0.1% Constant Voltage Controller

5.5 in (140 mm) W x 2.0 in (51 mm) H x 10.5 in (267 mm) L

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 2 06.01.21

Speciﬁcations

Regulatory Approvals and Compliance

• Lutron Quality Systems registered to ISO 9001.2015

• Manufacturing facilities employ ESD reduction

practices that comply with the requirements of

ANSI / ESD S20.20

• Meets ANSI C62.41 category A surge protection

standards up to and including 4 kV

• FCC Part 15

– Class A (277 V~)

– Class B (120 V~)

• CAN ICES‑005(A) (277 V~)

• CAN ICES‑005(B) (120 V~)

• LED controllers need to meet certain performance

criteria in order for the completed luminaires to comply

with Title 24 2019 requirements as detailed in Joint

Appendix 8. All models meet both commercial

(at 120 V~/ 277 V~) and residential (at 120 V~)

performance criteria throughout their entire load

operating regions. Consult 2019 Residential

Compliance Manual, Example 6‑3 Fade‑in Lighting

for important information on meeting start‑up time

requirements with fade‑in lighting.

• Meets UL®8750/CSA C22.2 No. 250.13‑14, “Light Emitting

Diode (LED) Equipment For Use in Lighting Products”

•

Class 2 output; meets UL

1310 /CSA C22.2 No. 223‑M91

Performance

• Dimming Range: 100% to 0.1%

• LED lighting turns on to any dimmed level without

ﬂashing to full brightness

• Operating Voltage: 120/ 277 V~at 50 / 60 Hz

• Rated lifetime of 50,000 hours at 40 °C (104 °F)

ambient temperature and maximum loading

• For rated warranty, ambient temperature (ta) not to

exceed 40 °C (104 °F) (maximum rated temperature)

2, 3

• Patented thermal fold back protection

• Non‑volatile memory restores all controller settings

after power failure

• Typical standby power consumption: 0.25 W at

120V~and 0.4 W at 277 V~

• Open‑circuit protected output

• Short‑circuit and overload‑protected output

• Output: 24 V-constant voltage at high‑end

• Output Load Range: 2 W to 96 W at high‑end

• Power Factor: > 0.90 at maximum power

• Total Harmonic Distortion (THD): < 20% at

maximumpower

• NEMA 410 – 2011 compliant

• Inrush Current Limiting Circuitry: decreases circuit

breaker tripping, switch arcing and relay failure; allows

full loading of switch leg

• Inrush Current: < 2 A

• Device turn‑on time: < 100 ms from electronic off and,

< 500 ms from power off

• LHD0‑96W24V‑U controller is programmed by Lutron

manufacturing and is NOT conﬁgurable by the Lutron

QwikFig conﬁguration system

1Light output at 0.1% depends on installation and light engine efﬁcacy.

2To maintain warranty, installer is responsible for ensuring that the controller ambient temperature does not exceed 40 ºC (104 ºF).

3Where tais the temperature of the air directly surrounding the controller.

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 3 06.01.21

Speciﬁcations (continued)

Environmental

• Sound rated: Class A inaudible in 24 dBA ambient

• Relative Humidity: maximum 90% non‑condensing

•

Minimum Operating Ambient Temperature: ta= 0 °C (32°F)

• Indoor use only

• Rated for dry and damp locations

• Meets NEC®requirements for installation in “other space used

for environmental air”

• Meets the Canadian National Building Code Plenum

Requirements for a concealed space used as a plenum within a

ﬂoor or roof assembly

• Maximum heat output of module: 46 BTU/hour

Controller Wiring and Mounting

For best installation practices, please refer to

Application Note #591 at www.lutron.com.

• Mount the controller in a position where it can be easily located

and accessed if service or troubleshooting is necessary.

• Controller is grounded by terminal connection

• Must be permanently connected, ﬁxed wiring for

277 V~ application

•

Terminal blocks on the controller accept solid or stranded wire per

terminal from 20 AWG to 12 AWG (0.50 mm2to 2.5 mm2).

• Maximum wire length between the LED controller and the start

of the linear strip for different wire sizes is listed below. The table

below can be used independently of the line voltage that is

powering the LED controller.

Wire Gauge Maximum Lead Length

24 AWG (0.20 mm2)

36 ft (1.8 m)

22 AWG (0.34 mm2)

310 ft (3.0 m)

20 AWG (0.50 mm2) 15 ft (4.5 m)

18 AWG (0.75 mm2) 25 ft (7.62 m)

16 AWG (1.0 mm2) 40 ft (12.2 m)

14 AWG (1.5 mm2) 60 ft (18.3 m)

12 AWG (2.5 mm2) 100 ft (30.5 m)

10 AWG (4.0 mm2)

3150 ft (45.7 m)

1Where tais the temperature of the air directly surrounding the controller.

2Additional considerations may be required based on state and local codes

and standards.

3To use wire gauge larger or smaller than terminal blocks’ rated gauge of 20 AWG to

12AWG (0.50 mm2to 2.5 mm2), connect 1 ft (0.3 m) or less of rated wire from terminal

and connect with larger or smaller wire.

Terminal Block Details

LED

(‑) LED

(+) HD1 HD2 LDH ND

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 4 06.01.21

Models Available

Model

Input

Voltage

(V~)

Input

Current1

(A)

Typical

Power

Factor1

Typical

THD1

(%)

Output

Power

(W)

Output

Voltage1

(V-)

3-Wire or

HomeWorks

Digital

Control

For 24 V-

Constant Voltage

LED Loads

LHD0‑96W24V‑U

120 0.92 0.99 82 – 96 24

277 0.40 0.94 13 2 – 96 24

1At maximum output power.

2For wiring options, see Wiring section, pages 8‑10.

NOTE: Speciﬁcations are subject to change without notice.

Output Voltage vs. Output Power

Output Power (W)

Output Power (W)Output Power (W)

Output Voltage (V) THD

Efﬁciency

100

23.0

22.5

22.0

21.5

21.0

20.5

20.0

23.5

24.0

24.5

25.0

25.5

26.0

THD vs. Output PowerEfﬁciency vs. Output Power

10%

15%

20%

25%

30%

010 20 30 40 50 60 70 80 90 100

100

Output Power (W)

Power Factor

Power Factor vs. Output Power

010 20 30 40 50 60 70 80 90 100

0.60

0.50

0.40

0.30

0.70

0.80

0.90

1.00

120 V~Key: 277 V~

120 V~Key: 277 V~120 V~Key: 277 V~

120 V~Key: 277 V~

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 5 06.01.21

Enclosure Dimensions

Measurements are shown as: in (mm)

Knockouts

• Sides

– 4 locations: 1/2 in or 21 mm trade size

• Top

– 2 locations: 1/2 in or 21 mm trade size

10.5 (267)

2.0 (51)

5.5 (140)

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 6 06.01.21

Mounting Options

1,2

1Any other mounting conﬁguration will require additional mechanical support. Improper installation may result in hazards to personnel or property.

2Mount the controller in a position where it can be easily located and accessed if service or troubleshooting is necessary.

Mounting Surface

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 7 06.01.21

Barrier Installation and Controller Spacing Requirements

Measurements are shown as: in (mm)

• Optional barrier can be placed either

between the input and HomeWorks digital

control terminals (Option 1) when the

HomeWorks digital links are wired as Class 2

or between the HomeWorks digital control

and output terminals (Option 2) when the

HomeWorks digital links are wired as Class 1.

• For 3‑wire control, barrier could be placed in

either location.

• The HomeWorks digital link may be wired

as Class 1 or Class 2. Please refer to

Application Note #142 at www.lutron.com

• Maintain a minimum of 3.0 in (76 mm) between

any two HomeWorks digital 0.1% controllers.

Option 1 Option 2

3.375 (86)

≥ 3.0 (76)

Barrier

≥ 3.0 (76)

Barrier Barrier

Output HomeWorks

Digital

Control

Input Output Input

Output Input

HomeWorks

Digital

Control

HomeWorks

Digital

Control

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 8 06.01.21

Wiring

LHD0 Models: 3-Wire Controls (third wire required for control signal)

Wiring Diagram

Compatible Controls without Soft-on, Fade-to-Black dimming technology: Lutron 3-Wire Controls5

Guaranteed performance speciﬁcations with the controls listed in the chart below.

For assistance selecting controls, contact our LED Center of Excellence at 1.877.346.5338 (U.S.A. and Canada

only) or LEDs@lutron.com

Product Model Number Controllers per Control

Load Type Low-end Trim

Setting

120 V~277 V~120 V~277 V~

Nova T*dimmer NTF‑10‑ NTF‑10‑277‑ 1 –16 1 – 19 — —

NTF‑103P‑ NTF‑103P‑277‑ 1 – 8 1 – 14 — —

Nova dimmer NF‑10‑ NF‑10‑277‑ 1 – 16 1 – 19 — —

NF‑103P‑ NF‑103P‑277‑ 1 – 8 1 – 14 — —

Skylark dimmer SF‑10P‑ SF‑12P‑277‑ 1 – 8 1 – 14 — —

SF‑103P‑ SF‑12P‑277‑3‑ 1 – 8 1 – 14 — —

Diva dimmer DVF‑103P‑ DVF‑103P‑277‑ 1 – 8 1 – 14 — —

DVSCF‑103P‑ DVSCF‑103P‑277‑ 1 – 8 1 – 14 — —

Ariadni dimmer AYF‑103P‑ AYF‑103P‑277‑ 1 – 8 1 – 14 — —

Maestro dimmer MAF‑6AM‑ MAF‑6AM‑277‑ 1 – 6 1 – 14 — —

MSCF‑6AM‑ MSCF‑6AM‑277‑ 1 – 6 1 – 14 — —

Maestro Wireless dimmer MRF2‑F6AN‑DV‑ 1 – 6 1 – 14 — —

RadioRA 2 dimmer RRD‑F6AN‑DV‑ 1 – 6 1 – 14 Dual voltage

3‑wire dimmer 21%

HomeWorks QS dimmer HQRD‑F6AN‑DV‑ 1 – 6 1 – 14 Fluorescent 3‑wire

LED 3‑wire 21%

Interfaces

PHPM‑3F‑120‑ —1 – 16 – — —

PHPM‑3F‑DV‑ 1 – 16 1 – 38 — —

1 – 16 1 – 38 — —

GP dimming panels Various 1 – 16 1 – 38 2‑1 —

1For the maximum wire length between the LED controller and the start of the linear strip, see charts in the Controller Wiring and Mounting section.

2No derating required in multi‑gang applications provided that the ﬁxture‑count does not exceed the quantity listed.

3Please refer to interface speciﬁcation sheet for compatible system list.

4Trim level allows the ability to get to 0.1% but might result in dead travel for 1%—4% on user interface for some installations. In this instance, 22% trim level

could be used to avoid dead travel but might result in >0.1% dim level.

5Soft‑on, Fade‑to‑Black dimming technology is not available for 3‑wire controls.

Note: For information about Legacy product use in existing control applications, contact LED[email protected]

Lutron

3‑Wire

Dimmer/

Module/Panel HomeWorks

Digital

0.1 % Constant

Voltage

LED Controller

LED

Light

Engine

Dimmed Hot (DH)

Line / Hot

LED +

LED –

Neutral (N)

Neutral

Neutral Ground

Ground

Switched Line / Hot (L)

To line

voltage

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 9 06.01.21

Wiring (continued)

LHD0 Models: HomeWorks Digital Controls

Compatible Controls with Soft-on, Fade-to-Black dimming technology: Lutron HomeWorks Digital Controls

Guaranteed performance speciﬁcations with the controls listed in the chart below.

For assistance selecting controls, contact our LED Center of Excellence at 1.844.LUTRON1 (U.S.A. and Canada

only) or LEDs@lutron.com

Product Model Number Recommended

System Version Controllers per Control

120 V~277 V~

HomeWorks QSX LQSE‑2HDC‑D —10 or higher 64 per HomeWorks

digital link

1For the maximum wire length between the LED controller and the start of the linear strip, see charts in the Controller Wiring and Mounting section.

HomeWorks

Digital

0.1 % Constant

Voltage

LED Controller

To HomeWorks Digital Link

LED

Light

Engine

Line / Hot (L)

LED+

LED–

Neutral (N)

Ground

HD1

HD2

To line

voltage

HomeWorks Digital 0.1% Constant Voltage Controller

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

LED Dimming Controller Architectural Dimming

3691213a 10 06.01.21

Wiring (continued)

Continuous LED Light Run

In a continuous LED light run, it is best to connect the load wires in the middle of the LED light run. Please consult

load manufacturer best practices for any additional consideration in load installation.

When connecting several LED light homeruns, ensure that the wire lengths and wattages match as closely as

possible for best performance.

HomeWorks Digital

0.1 % Constant

Voltage LED Controller

LED

Light

Engines

LED +

LED –

HomeWorks Digital

0.1 % Constant

Voltage LED Controller

LED +

LED –

LED +

LED –

LED +

LED –

LED

Light

Engine

LED

Light

Engine

LED

Light

Engine

For installation best practices, please refer to Application Note #591 at www.lutron.com

Altri manuali per LHD0-96W24V-U UL

Indice

Altri manuali Lutron Electronics Controllori

Lutron Electronics

Lutron Electronics GRX-LC8 Manuale

Lutron Electronics

Lutron Electronics LTEA4U1UKL Series Manuale utente

Lutron Electronics

Lutron Electronics Grafik Eye GRX-TVI Manuale utente

Lutron Electronics

Lutron Electronics DFCSJ-OEM-OCC Manuale utente

Lutron Electronics

Lutron Electronics QS IR Eye Manuale del proprietario

Lutron Electronics

Lutron Electronics Maestro Manuale utente

Lutron Electronics

Lutron Electronics AYFSQ-F Manuale utente

Lutron Electronics

Lutron Electronics Sivoia QED Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK Eye QS Manuale del proprietario

Lutron Electronics

Lutron Electronics Vive Series Manuale utente

Lutron Electronics

Lutron Electronics Hi-lume Premier Manuale utente

Lutron Electronics

Lutron Electronics L3D0-96W24V-U Manuale utente

Lutron Electronics

Lutron Electronics AYFSQ-F Manuale utente

Lutron Electronics

Lutron Electronics seeTouch Manuale utente

Lutron Electronics

Lutron Electronics GRAFIK Eye GRX-4M-GC Istruzioni per il montaggio

Lutron Electronics

Lutron Electronics PowPak RMKS-DAL4-SZ Manuale utente

Lutron Electronics

Lutron Electronics YFSQ-F Manuale utente

Lutron Electronics

Lutron Electronics PowPak FCJ-010 Manuale utente

Lutron Electronics

Lutron Electronics Homeworks QS seeTouch HQWIS-NB-NONE Manuale utente

Lutron Electronics

Lutron Electronics FS-SE Manuale utente

Lutron Electronics

Lutron Electronics LHD0-96W24V-U UL Manuale utente

Lutron Electronics

Lutron Electronics Energi Savr Node QS QSNE-4S10-D Istruzioni operative

Lutron Electronics

Lutron Electronics WC-4M-GC Istruzioni per il montaggio

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente